Better Packages    Shelton, CT 06484
Jul 01, 2005 Available in 110 and 230 V models, Electronic PS2A complies with EMC directive 89/336/EED for electromagnetic compatibility and LVD directive 73/23/EEC for low voltage requirements. It accommodates 0.25-2 in. tape widths and accepts rolls of tape with cores from 1-3 in. dia. Compact, tabletop design includes LED display and color-coded, programmable keypad that lets user to set and automatically dispense tape in lengths to 999 mm.

Better Packages    Shelton, CT 06484
Jul 01, 2005 Suited for use on corrugated cartons, reinforced BetterSeal(TM) Secure Tape bonds with carton to produce sturdy, secure seal. Product is available in more than 15 different styles and comes in lengths from 375-3,000 ft. Optional printing is available. E-Z® Pull Tab style adds tear strip that eliminates need for use of box cutters or sharp blades. Optional printers and other accessories are available to enhance security.

MARKEM Corp.    Keene, NH 03431-7100
Jul 01, 2005 SmartDate® 5 line includes SmartDate 5 and 5s models that can be used with VFFS and HFFS machines, flow wrappers, label applicators, and cartoning machines. Coders are software compatible with all other MARKEM coders and have embedded PackML software for OMAC compliance. SmartDate 5 offers reconfiguration from intermittent or continuous mode in less than 5 min and digital ribbon management. Model 5s features shuttle technology to achieve print speeds up to 1,800 mm/sec.

Micro Plastics, Inc.    Flippin, AR 72634
Jul 01, 2005 Offered in solid and split leg designs, Circuit Board Card Guides provide users with PCB mounting solution that facilitates panel insertion. Smooth positive channel guides PCB while firmly supporting and protecting board. Molded of electrically insulating Nylon 6/6, guides are designed to snap into pre-punched holes in chassis. Available sizes include 2½-6 in. long x ¼ in. wide, and other sizes can be tooled as needed.

NLB Corporation    Wixom, MI 48393 2824
Jul 01, 2005 Rated to 20,000 psi, self-propelling Rotating Line Mole Nozzles may be repaired in-field in under 5 min. Models RLM-2-20K, RLM-4-20K, and RLM-6-20K cover flow rates from 4–18 gpm and feature integrated backward-facing orifices that propel them through hard deposits on ID of pipes and tubes. Simultaneously, part of nozzle rotates and polishes pipe ID. Stainless steel units can be pre-drilled or custom-drilled, depending on application requirements.

Sabritec    Irvine, CA 92614
Jul 01, 2005 Multiway Triax D-Subminiature series grounds outer shield of triax contact directly to shell of connector. Multi-finger ground spring, fixed around triax shell, provides multi-point contact engagement for EMI shielding. Size 10 triax interface transmits data at 100 ohm differential pair impedance. Able to mate up to 14 contacts in one connector interface, design has polarizing shell to prevent mismating and scoop-proof concentric triax interface for mating repeatability.

Kennametal Inc., Advanced Materials Div.    Latrobe, PA 15650-0231
Jul 01, 2005 Offered with corner radius choices from 0.8-6.4 mm, Mill1 Max tooling includes end mills, shell mills, and integral shank (monoblock) toolholders. All monoblocks come balanced to specification of G2.5 at 10,000 rpm, and face topography delivers chip control at reduced cutting forces. Products produce true 90° walls at 25 mm axial depth of cut and are suited for high-speed cutting (25,000 rpm for 1.5 in. cutter) of aerospace aluminum alloys.

Baumer Ltd.    Southington, CT 06489 1534
Jul 01, 2005 Available with IP65 protection, H25 general-purpose, rotary motion encoder features H25 NEMA flange footprint and 3/8 in. shaft. It handles rotational speeds to 10,000 rpm and delivers up to 6,000 ppr output as standard quadrature signal. Able to operate in temperatures to 100ºC and RH to 95%, square flange encoder has bearings and aluminum housing that deliver shock rating of 200G. Output signals include channels A, B, and N as well as their inverses.

Artesyn Technologies    Framingham, MA 01701
Jul 01, 2005 Occupying board area of 2.14 in.², open-frame PTHxx040W series features output voltage adjustment and Auto-Track(TM) power sequencing. Model PTH12040W has output current rating of 50 A and 8-14 V input voltage range, while PTH04040W has 60 A rating and input range of 2.95-5.5 V. Series is Point-of-Load Alliance (POLA)-compliant and employs switching frequency of 1.05 MHz to achieve full load conversion efficiencies to 96%. Both models deliver up to 250 W.

Eriez Magnetics    Erie, PA 16506
Jul 01, 2005 Xtreme(TM) Magnets utilize double stack of magnet pressings and can be used in operations where ferrous extraction is required. They can remove fines, work-hardened stainless steel, and weakly magnetic materials in food and pharmaceutical applications. Magnets are designed to perform in situations with deeper burden depths, higher suspension heights, deep reach applications, and U-Trap applications for thick or dense products.

QuadTech, Inc.    Maynard, MA 01754
Jul 01, 2005 Model 1860 measures insulation resistance of components, leakage resistance on capacitors, and resistivity on samples of insulating material. Back-lit LCD display presents measurements in text and bar graph format, and RS-232C interface facilitates serial data collection. Along with programmable charge and measure times, unit offers built-in calibration capability and programmable limits. Resistance measurement range is 250 kohm to 20 Tohm.

ACG Identification GmbH    Walluf 65396  Germany
Jul 01, 2005 HF Dual ISO Handheld reader, manufactured in Compact Flashâ„¢ card form factor, can be integrated into mobile devices such as PDAs and laptops. Interoperable with RFID transponder solutions, RFID read/write handheld module transmits data at rates to 848 kbit/s over RF interface. Features such as anti-collision algorithm and upgradeable firmware make unit suited for mobile applications such as verification of e-passports, e-drivers licenses, and e-ID cards.

Ampacet Corp.    Tarrytown, NY 10591-5130
Jul 01, 2005 High-clarity slip antiblock, Product 102286 eliminates loss in clarity that often accompanies antiblock use by raising film clarity well above that of base resin. Product makes film up to 65% clearer 50% more glossy than base polymer. Mineral-based additive has narrow particle size distribution and spherical particles that have less impact on haze than irregular particles normally found in agents.

Ampacet Corp.    Tarrytown, NY 10591-5130
Jul 01, 2005 Intended for use in translucent and opaque films made of low density and linear low density polyethylene, Masterbatch Product 101499 protects packaging from moisture penetration. It reacts with and binds water vapor as it enters film, extending shelf life of foods and pharmaceuticals. Compound can be used in blown and cast films, whether monolayer or multilayer, and complies with federal guidelines for food contact packaging.

Ampacet Corp.    Tarrytown, NY 10591-5130
Jul 01, 2005 AmpaTraceâ„¢ adds distinct signatures to masterbatches, allowing flexible and rigid plastic packaging to be evaluated at any point in supply chain to resolve security, quality, and liability issues. Readily measured by standard laboratory analytical tools, tracers contain compounds that comply with FDA food contact regulations and do not affect package performance or appearance. Protective technology can be used alone or in multi-level traceability system.

Ampacet Corp.    Tarrytown, NY 10591-5130
Jul 01, 2005 Intended for use with engineering thermoplastics, Performance Plusâ„¢ color and additive masterbatches are formulated to lower resin viscosity during processing and optimize pigment and additive distribution. Lower viscosity allows injection molders to shorten cycle times by processing at lower temperatures. Masterbatches are not reactive or toxic, do not migrate, and are safe in all forms of use. They are effective in both unfilled and filled engineering thermoplastics.

Aries Electronics, Inc.    Bristol, PA 19007-6810
Jul 01, 2005 Test and Burn-In Socket accommodates devices from 41-55 mm² and lead pitches from 0.45-2.54 mm. Spring-loaded, cam-actuated pressure pad applies force against device after socket lid has been closed and latched. Reversing cam removes force prior to unlatching spring-loaded lid. With signal path of 1.92 mm during test, socket is suited for test and burn-in of IC devices such as SRAM, DRAM, DSP and Flash, as well as CSP, MicroBGA, LCC, LGA, QFP, QFN, and MLF packages.

Regenesis Bioremediation Products    San Clemente, CA 92673
Jul 01, 2005 RegenOxâ„¢ provides in-situ remediation of recalcitrant soil and groundwater pollutants, such as industrial degreasers, explosives, and pesticides. Injected directly into soil using direct-push equipment, non-toxic formulation uses synergistic chemical processes aimed at rapidly attacking and destroying broad range of contaminants. Since RegenOx remains active for up to 1 month, it can remove large amounts of contamination and has no detrimental impact on groundwater.

Theorem Solutions Inc.    Loveland, OH 45140
Jul 01, 2005 Designed for bi-directional exchange of CATIA v5 R15 data, CADverter Suite enables rapid import and export of UGS NX2 and NX3, I-DEAS Master Series 10 and 11, Pro/ENGINEER Wildfire, CADDS, ICEM Surf, and Parasolid models and assemblies to and from CATIA v5 R15. Uni-directional CATIA v5 R15 CADverters for UGS visualization system, VisMockup(JT), and PTC’s ProductView visualization system are complemented by ability to create CATIA v5 models and assemblies from JT format.

Actual Tools    Vancouver V6H 4E4  Canada
Jul 01, 2005 Actual Window Manager for Traders enables stock traders to work with multiple trading programs on Windows-based platforms. It features over 40 utilitarian functions for multitasking in several applications. Stay-on-Top function enables users to place charts, chat room windows, time and sales windows on top of other trading applications so that content always remains visible. With Roll-Up/Unroll function, applications that are floating on top can be minimized to title bars.