Hover-Davis, Inc.    Rochester, NY 14624
Jun 03, 2005 Tape feeders, available in 12/16, 24/32, 44, and 56 mm sizes, employ reversible index drive that facilitates component changeovers. Along with high-visibility status indicators, products feature modular design and software diagnostic feature set with pick point calibration. Pre-printed label feeder, LPS, and print-on-demand label feeder, POD600, are also compatible with Siplace placement machine family.

Fisnar Inc.    Wayne, NJ 07470
Jun 02, 2005 Pinch Tube Dispensing Pen, Model 700PTPCW manually dispenses continuous beads or applies small amounts of low-medium viscosity liquids. It shuts off fluid flow with input pressures up to 50 psi of supply source. Replaceable pinch tube assembly has inlet and outlet fittings molded onto polyethylene tube. It is only part of pen in contact with material and discarded when contaminated. Model 700PTPCW can be fed from gravity or pressurized reservoirs via interchangeable fittings.

Tripp Lite    Chicago, IL 60609
Jun 02, 2005 Incorporating double-fault safety protection and tested to US and Canadian safety standards, Model PS-615-HGULTRA provides power distribution solution with six NEMA 5–15R hospital-grade receptacles, permitting multiple items of electrical equipment to be operated in rooms with only single duplex outlet. Unit features all-metal case, 15 ft AC power cord, built-in resettable circuit breaker, and switchless design to prevent accidental shutoff.

Whitney Blake Co.    Bellows Falls, VT 05101 0579
Jun 02, 2005 Featuring double Neoprene jacket, Coiled Cords withstand harsh manufacturing environments. They offer extension length of 10–20 ft and are available in 12–18 AWG configurations. Light- and medium-duty cords reach max of 300 V, while heavy-duty cords handle up to 600 V. All are UL-listed and CSA-certified. Applications include automotive equipment, computers, bar code readers, material handling equipment, production line tools, and instrumentation and testing devices.

Birchwood Casey    Eden Prairie, MN 55344 2138
Jun 02, 2005 TRU TEMP® produces non-dimensional black oxide finish, directly over light heat treat scale, on all types of fasteners and other bulk-handled parts. Since it operates at 200°F, it avoids severe splattering and boilover hazards of conventional hot oxide tanks. Solutions used in process line prevent formation of red coatings and white salt leaching. Process contains no EPA regulated chemicals and meets military specification MIL-DTL-13924 Class 1, and AMS 2485.

Schmersal Inc.    Tarrytown, NY 10591
Jun 02, 2005 Manufactured in IP67-rated metal housing, ZS80 features 3 cable entries, lever-actuated manual reset, position indicator, and optional signaling lamp. It can span lengths of up to 50 m and employs dual double-break contact blocks, which provide choice of 2 positive-opening NC contacts and 2 NO contacts; 3 positive-opening NC contacts and one NO contact; or 4 positive-opening NC contacts. Contacts change state when cable is pulled or goes slack.

Schmersal Inc.    Tarrytown, NY 10591
Jun 02, 2005 Rated IP67, tamper-resistant Series BNS-B20 may be used as combination door handle and safety interlock switch on hinged and sliding machine guards. Each unit consists of low-profile door handle assembly with 2 multiple reed switch arrays and coded-magnet actuators. Along with LED for switch status, product features 2 NC contacts, one NO contact, and M12x1 quick disconnect. Integral latching magnets attract pole pieces with 100 N holding force.

Optek Technology, Inc.    Carrollton, TX 75006-6905
Jun 02, 2005 With viewing angle of 110°/50° or 110°/60°, OVL Series includes blue, green, red/orange, and red LEDs in 3, 4, and 5 mm through-hole, elliptical packages. They feature color diffused lenses are rated for operation from -40 and +85°C. Intensity for blue LEDs ranges from 300-500 mcd. Intensity ranges from 1,100-1,750 mcd for green LEDs, 430-800 mcd for red/orange color, and 400-950 mcd for red LEDs. Power dissipation for all devices is 130 nW.

Linear Technology Corp.    Milpitas, CA 95035
Jun 02, 2005 Able to sense input voltage to 48 V, high side LT6100 uses internal resistors and can be configured for one of 6 gain settings with gain accuracy of 0.5%. Buffered output allows part to be directly loaded by other circuitry. Differential inputs have 300 µV offset and can accept fully differential voltages up to supply. Able to withstand -48 V reverse battery condition, LT6100 uses separate 2.7-36 V voltage supply that draws 60 µA.

Sabritec    Irvine, CA 92614
Jun 02, 2005 Offered in true differential twinax packages with NDL, SMA, and Micro-D Size constraints, Micro Twinax series miniaturized connectors support 100 Base-T Ethernet and 1 Gbps min Fibe Channel operation. Products can be driven via matched impedance differential pair interconnections for board to board data transfer. All connectors are available in straight or right angle versions.

Phihong USA    Fremont, CA 94539
Jun 02, 2005 Usable in any network without compromising data rate, multiport midspan power injector implements Power-over-Ethernet (PoE) into existing network where power can be inserted on spare pair. Product is offered in 1-, 8-, 16-, and 24-port versions that provide 15.4 W per port. It comes with software to control and monitor each port along with full power management capability for load shedding in back-up power conditions.

Cyclonaire Corp.    York, NE 68467-0366
Jun 02, 2005 Available in kits for installation in bins, hoppers, silos, and bulk carriers, VibraPad(TM) Aerators increase rate and consistency of flow for dry bulk materials. Products combine fluidizing air with mechanical vibration to set dry bulk materials in motion, eliminating bridging, rat-holing, and compacting of dry bulk solids. Units are abrasion-resistant for use with most dry solids and are offered in silicon rubber or neoprene for sanitary applications.

Wyatt Technology    Santa Barbara, CA 93117
Jun 02, 2005 Equipped with tools for characterizing unfractionated samples via DLS, DynaPro Dynamic Light Scattering (DLS) system is suited for characterization of size and polydispersity. Read module comes as temperature-controlled scintillation vial reader for single measurements or fully automated plate reader with capability to make measurements on 96- or 384-well plates. System includes control module and self-dessicating temperature chamber.

Texas Instruments Inc. / Tiris Division    Dallas, TX 75243
Jun 02, 2005 Available in single in-line pin packages, 8 and 18 A POLA™-compatible, non-isolated, plug-in power modules support input voltages of 3.3, 5, and 12 V. Series PTVxx010 provides step-down conversion to range of output voltages, at up to 8 A of output current. Output voltage can be set at any value between 0.8–1.8 V or 2.5–3.6 V. Series PTVxx020 consists of 12-pin modules that support similar systems requiring output current up to 18 A.

Mitutoyo America Corp.    Aurora, IL 60504 9176
Jun 02, 2005 Utilizing multi-face polygonal mirrors and high-speed motors, Series LSM-544 can measure vibrating workpieces and items moving on-line at high speed, such as fiber extrusions. Instruments are available in variety of models for applications ranging from measurement of ultra-fine, 0.005 mm dia wires at 0.01 µm resolution to measurement of cylindrical workpieces up to 120 mm. RS-232C interface and SPC output are provided on most models.

Automated Precision, Inc.    Rockville, MD 20850
Jun 02, 2005 TrackerCal v1.2 includes 1-Point QVC feature, which allows correction of all 6 error parameters on Laser Tracker II Plus! using single point. With this feature, field adjustments of tracker's squareness are possible. Portable Birdbath calibration tool speeds inside-outside test for laser tracker home position while out in shop environment. All data relating to checks and calibration are automatically recorded and can be retrieved at any time.

Bilco Company, The    New Haven, CT 06505
Jun 02, 2005 Providing egress from underground platforms and tunnels, JD and JD-AL facilitate safe escape in emergency situation. Doors are equipped with stainless steel panic lock and compression spring operators. For added safety, doors also feature handrails as well as custom interior and exterior signage. Constructed of aluminum or steel, products are reinforced for AASHTO H20 wheel loading in sidewalk applications with pedestrian and vehicular traffic.

Picosecond Pulse Labs, Inc.    Boulder, CO 80301
Jun 02, 2005 Designed for use in high-end digital radar receivers, 7600 Down Conversion Sampling Module employs Non-Linear Transmission Line (NLTL) technologies and terahertz diode construction. It offers consistent linearity performance over 25 GHz of RF bandwidth at sampling rates to 2 GHz. Able to replace traditional mixers and reduce complexity of current broadband radar system architectures, product features sampling rate of 10 MS/sec to 2 GS/sec.

Para Light Corp.    Walnut, CA 91789
Jun 02, 2005 Rated for 350 mA operating current, EP4 series E-power LEDs are available as individual single-color LEDs in blue, green, amber, red, and cyan or as RGB package with color-changing capability. Products offer output intensity from 2–10 candelas and total flux from 4–20 lumens. With viewing angles of 90° and 100°, products are also available in lighting strips and modules. Applications include sign, track, emergency, and architectural lighting.

French Technology Press Office, Inc.    Chicago, IL 60601
Jun 02, 2005 Packaging Line includes Ariform 603 sleevewrapper, which features minimal moving parts and independent left and right adjustments. Operating at 40 trays/min, Aritray robotized tray packer uses dynamic collation forming and progressive deceleration of movements for product protection. Products are transferred into trays by 4-axis FANUC M-420iA robot.