Thermo Electron Corp.    Waltham, MA 02454
Jun 15, 2005 Used for analysis and detection of hazardous elements, Atomic Absorption (AA) spectrometers help users meet WEEE and RoHS directives. M and S series include products ranging from entry-level, single/multi-element flame or furnace to multi-element, dual atomizer flame and furnace instruments. Both series feature VP100 Continuous Flow Vapor System for high-sensitivity vapor analysis and Mercury Absorption Cell for detection of mercury formed as mono-atomic vapor.

Megger    Dallas, TX 75237-1017
Jun 15, 2005 Transformer Turns Ratio Test Set measures turns ratio to 45,000:1 with 0.1% accuracy. Three-phase, automatic unit features built-in storage and downloading capabilities, plus software for remote control operation. In addition to measuring turns ratio of power, instrument, and distribution transformers, device also measures excitation current to 0.1 mA and phase angle deviation with resolution of 0.1 min. ComLink software allows users to save up to 200 test results.

Master Lock Co.    Oak Creek, WI 53154
Jun 15, 2005 Measuring 7 x 17 in., nylon Cinch Sack accommodates large and odd-shaped electrical plugs and connectors. User places connector or plug in bag, cinches bag closed, and applies up to 6 padlocks or hasps. Bag cannot be opened until last padlock is removed. Sack can also be used to lockout crane controls. Tri-lingual lockout warning is printed on outside of bag, and bag folds up for storage.

Cortec Corp.    St. Paul, MN 55110
Jun 15, 2005 VpCI(TM) 374 Waterborne Metal Primer is formulated as fast drying, thixotropic coating with low viscosity that resists sagging. Built-in VpCI(TM) Anti-Corrosion System provides protection against corrosion, sunlight, and weather for carbon steel, cast iron, stainless steel, and aluminum. Designed for production base coating using conventional spray or airless spray, product can also be applied by brush or roller for touch-up and field use.

MPI Label Systems    Sebring, OH 44672
Jun 15, 2005 Incorporating Sato or Zebra thermal printer, 3600RW Label Printer/Applicator allows users to print, validate, write, and affix variable RFID labels at speeds up to 30 labels/min. Read/write head inspects each transponder at point of label application. Acceptable transponder labels are written to with real time information and tamp-blow applied, while labels with defective transponders are detected and discarded.

DEK International GmbH    Zurich Ch-8005  Switzerland
Jun 15, 2005 DEK Lead-Freeâ„¢ Branded products include stencils for lead-free solder paste, squeegees and cleaning materials, lead-free stencil storage, and lead-free Printer Caddy. Formalized approach to implementing lead-free pre-placement begins with focused process audit and Site Implementation Plan methodology. Tutored workshop sessions are provided with unlimited Q and A, allowing customers to gain hands-on experience with lead-free materials and processes.

Kanguru Solutions    Millis, MA 02054
Jun 15, 2005 Kanguru PC Clone Kit allows user to recover from hard drive failure within minutes, without image files to restore from or recovery CDs to boot. Users connect new IDE hard drive of equal or greater size using IDE to USB2.0 adapter. Able to support disks over 180 GB, included Acronis Migrate Easy 7.0 is run on PC to create exact copy of hard drive, and cloned drive is stored until needed. Kit can also be used to upgrade hard drive to larger capacity.

Delcam USA    Salt Lake City, UT 84111
Jun 14, 2005 Promoting natural, 2-handed work style, FeatureCAM® 2006 features built-in 3Dconnexion controllers that let users pan, zoom, rotate, and spin models while editing, selecting, or drawing simultaneously with mouse. Commonly used functions can be mapped to buttons on motion controller through built-in control panel. Software creates operations from part features that contain all necessary machining parameters.

AddisonMckee    Preston, Lancashire PR5 8AJ  United Kingdom
Jun 14, 2005 Powerbend machines employ hydraulically-powered mandrel tube benders capable of handling carbon steel tube from 50–125 mm dia. With respective maximum bend angles and CLR of 180° and 250 mm, units feature externally mounted hydraulic valves and filter; plug-in electrical connections to valves with position indicators; and hydraulically powered, direct acting reaction arm. Allen-Bradley alphanumeric keypad offers 1,000 program storage with 16 bends max per program.

Mid-West Instrument    Sterling Heights, MI 48314
Jun 14, 2005 Made of aluminum bronze or monel, piston-type Filter Minder 120 offers pressure ranges of 0–5 through 0–100 psid with ±5% FS accuracy. Pressure is sensed by movement of floating piston magnet against calibrated spring. Gauge pointer follows movement of piston magnet and indicates differential pressure. Weather-resistant unit is over-range protected to working pressure of 5,000 psig. Dials come in 2½, 3½, and 4½ in. sizes with shatter-resistant lens.

North Safety Products, Inc.    Cranston, RI 02920
Jun 14, 2005 Belt-mounted, PAPR is available with 2 blower/battery assemblies. One option, for tight fitting facepieces, converts half masks and full facepieces to PAPR without tools or adapters. User can also choose from selection of loose fitting facepieces or bibbed hoods. With nickel metal hydride battery providing steady power for 8 hr, respirator is suited for abatement market, pharmaceutical industry, smelting operations, and hot work environments.

imaging Technology international (iTi)    Boulder, CO 80303
Jun 14, 2005 Drop Watcher III provides automated measurements of ink jet drop formations and flight characteristics of any jet-able fluid. Automated Data Acquisition Software motion profile feature permits user control over camera motion during testing, while nozzle alignment function readjusts camera position to account for motion profile inaccuracies. Data recording spreadsheet accommodates up to 1,024 fields for data storage.

Numinus, LLC    Encinitas, CA 92024
Jun 14, 2005 MRI StarDomesâ„¢ have zero EMF and use no electricity; stars and cove light use only fiber optics to transmit light. Product uses halogen light source for side emitting fiber optic cove light and LED circuit board for stars in adjacent utility room. Run through wave guide tube into shielded MRI room, fibers help calm patients with blue color, circular shape, constellation patterns, and day to night transition.

Ross, Charles, & Son Co.    Hauppauge, NY 11788 0615
Jun 14, 2005 Sanitary Blenders are manufactured in 316 stainless steel and polished to facilitate cleaning between batches. Agitators and shaft assemblies are designed and constructed with smooth weld finishes, while shaft seal rings are readily accessible and removable to permit cleaning of all product zone surfaces. Offered in sizes from 1–515 ft³, blenders can include side sight ports, control systems, lights for viewing, and jackets for heating or cooling.

Ross, Charles, & Son Co.    Hauppauge, NY 11788 0615
Jun 14, 2005 Sanitary VersaMix Model VMC-40 utilizes dual agitation systems to provide process flexibility. Unit is constructed with 316 stainless steel wetted parts and includes disperser, 3-wing anchor with TFE scrapers, gas purged shaft seals, and jacketed vessel. Built with vacuum construction for operation to 29½ hg, unit also includes portable mixing vessel and independently variable speed drives. Change can and fixed tank designs are available.

Anver Corp. - Anver.Com    Hudson, MA 01749
Jun 14, 2005 Heavy Duty Vacuum Lifters are equipped with rectangular vacuum pads that measure 19 x 34 in. each and provide 3,200 lb lifting capacity per pad. Featuring all-welded steel frames, lifters come models with 2–6 vacuum pads and are designed for continuous-duty applications. Products provide wobble-free lifting structure, and vacuum pads are made from steel with bolt-on nitrile seals or optional silicone seals. Various vacuum pumps and ac voltages are available.

Esco Tool    Medfield, MA 02052
Jun 14, 2005 Prepzilla MILLHOG® pipe milling end prep tool features one mandrel and 8 sets of interchangeable clamps to cover 1½ in. ID to 8 5/8 in. OD operating range. Designed for materials such as stainless steel and P-91, tool has 2¾ hp pneumatic motor, generates 1,500 lb-ft of torque at cutter blade, and pulls thick chip without cutting fluids. It uses EscoLockâ„¢ blade lock system and TiN coated cutter blades and is capable of beveling and facing or boring in one operation.

Stafford Mfg. Corp.    Wilmington, MA 01887
Jun 14, 2005 Stafford Shaft Collars are available with threaded-, square-, smooth-, hex-, and keyed-bores to match positive drive shafts. Available in 1-piece, 2-piece, and hinged-collar styles, products are machined from steel, 303 stainless steel, and aluminum. Collars, offered in standard inch/metric sizes from 1/8–10 in. ID and 3.175–254 mm, may also be constructed from 316 stainless steel, brass, bronze, and exotic alloys.

GE Intelligent Platforms    Charlottesville, VA 22911
Jun 14, 2005 Comprised of Proficy Server and Proficy Console, Proficy(TM) Platform includes packaged integration with enterprise systems and Proficy HMI/SCADA applications as well as library of tools and published APIs for third-party development of applications. It allow users to standardize on single manufacturing IT platform for managing real-time operations with data-model and event-based platform based on Proficy Historian and Proficy Real-Time Information Portal technologies.

Mazak Corp.    Florence, KY 41042 3092
Jun 14, 2005 Integrex 100-IIIST features 6,000 rpm max turning spindle speed with 6 in. chuck and milling spindle with 12,000 rpm max speed. Second spindle eliminates work-in-process; parts are completed in one setup on one machine. Linear guides are provided on X, Y, and Z axes, with rapid traverse speeds of 1,181, 1,024, and 1,299 ipm, respectively. Machine includes automatic tool changer with 20-tool magazine and Mazatrol Fusion 640 MT Pro CNC control with 64-bit RISC processor.