Metabo Corp.    West Chester, PA 19380 4243
Jul 21, 2005 Featuring 25½ x 30 in. table and no-load 3,950 rpm 15 A motor, 70 lb TS 250 Portable Table Saw features cutting depth of 3 1/8 in. at 90° and 2½ in. at 45° with 10 in., 34-tooth carbide blade. Saw crosscuts up to 22 in. with T-slot miter gauge and allows -1.5° to 46.5° bevel. Table extension allows rip cuts to 24¼ in. Saw includes parallel fence, soft-start technology, and storage for blades, wrenches and power cord.

Fortress Interlocks Ltd    Erlanger, KY 41018
Jul 21, 2005 Safety key module enables operator to retain machine activation key while entering potentially hazardous area, ensuring only authorized personnel can access guarded area. Constructed using stainless steel and zinc alloys, AmGard combines trapped key and gate switch technology to control access to equipment protected by safety guarding with sliding or hinged doors. It includes solenoid-controlled locks and is ingress protected to IP67.

Anver Corp. - Anver.Com    Hudson, MA 01749
Jul 21, 2005 Designed for picking up non-porous surfaces, Model HC-108D consists of 2 hand suction cups and removable turnbuckle assembly that pulls them together for setting of seam. Turnbuckle assembly, providing fully adjustable tension for pulling pieces together, has reversing gear for quick release after setting. While unit provides 300+ lb side pull capacity at 4 to 1 safety factor, multiple tools can be used on larger countertops and floors as needed.

Alpha-Core, Inc.    Bridgeport, CT 06608
Jul 21, 2005 Suited for small-volume users, 34–14 AWG Round Magnet Wire is stocked on 10 lb spools and used for board-mounted components in power supplies, voice coils in speakers, and motor coils. Tinned Solid Copper Wire, offered on 2 and 10 lb spools, is available round and flat from 36–22 AWG for use in pins and PCB connections. Also available, 30–9 AWG Flat Magnet Wire is suited for use anywhere compact coils and improved heat dissipation are desirable.

Frommelt Safety Products    Dubuque, IA 52002 2654
Jul 21, 2005 Guardian Conveyor Door is designed to minimize wall space for conveyor passage or separation of processing to warehouse space. Manufactured with soft bottom edge and gravity down operation, it opens at speeds of 36 ips and comes with track guides and barrier bars for stability. Safety interlocking features built into guides allow conveyor integration if needed. Various fabric curtain choices are offered with full width vision capability.

Bosch Power Tools & Accessories    Mt. Prospect, IL 60056
Jul 21, 2005 Type I Spur and Type II Ship Auger Bits feature Power Band Tip, which keeps all drilling power focused to cutting edge. Ranging in size from ¼-1½ in. dia with overall lengths of 7½, 13, and 17 in., Type I bits utilize cutting spur to cut clean holes in applications unlikely to encounter nails or staples. Type II units range from 3/8-1½ in. with overall lengths of 7½, 17, and 24 in. Self-feeding screw point cuts through nails, staples, and screws in soft or hard wood.

KUKA Robotics Corp.    Clinton Township, MI 48036
Jul 21, 2005 Six-axis Clean Room Robots include tabletop KUKA KR 3 CR with 3 kg payload and 635 mm reach, and KUKA KR 16 CR with 16 kg payload and 1,600 mm reach. Each meets ISO and DIN standards for clean room operation and is class 5 according to DIN EN ISO 14644-1 and class 100 according to US Federal Standard 209 E. Supporting Siemens Simatic equipment control system, both are suited for wafer and IC handling, as well as testing, packaging, and process applications.

Mykrolis Corp.    Billerica, MA 01821
Jul 21, 2005 Designed for low-flow point-of-use CMP applications, Solaris® DVP Dual Transducer Manifold uses disposable methods of reducing defect-causing particles, gels, and agglomerates while simultaneously allowing critical working particles to pass through and reach wafer. It offers clean, safe filter changeout in seconds without use of tools and integrates upstream and downstream pressure transducers for online monitoring of system and filter pressure drop to protect CMP slurries.

Speedline Technologies Inc.    Franklin, MA 02038
Jul 21, 2005 Camalot® XyflexProâ„¢ HVB (High Volume Batch) Dispenser uses conveyorless material handling system and dual dispense heads. Throughput rate is achieved by optimizing number of parts in process to fully absorb capillary flow times, part transport times, and extended product heating times. Max dispense head utilization provides ability to process 16 boats/96 parts within dispense area. Underfill solution also offers single station magazine loading/unloading.

AXIOMTEK    Taipei   Taiwan
Jul 21, 2005 Powered by Intel® Pentium® 4 processor, industrial-grade Panel1170-800 uses Intel 852GM chipset to support 2 SATA HDDs as well as RAID 0 and RAID 1 capabilities. It features SXGA LCD touch screen display, full-functioning HMI, 2 expansion PCI slots, and optional CD-ROM drive. Up to 1 GB DDR DIMM memory can be installed, and onboard Solid State Disk provides additional memory using CompactFlashâ„¢ type II socket. LAN support is provided with 10/100 based-T Ethernet port.

Nikon, Inc. Instrument Group Div.    Melville, NY 11747
Jul 21, 2005 Able to measure 3D structures with different reflectivity rates, Confocal NEXIV VMR-K3040ZC addresses metrology needs of complex IC packages for semiconductors. Product aids in measurement of multi-layer chips, as well as position and height of wire and micro-bumps connecting multiple layers. It uses Nipkow disk, digital CCD camera, and optical sectioning technology to capture 3D image in one scan. Nikon objective lenses are offered in 1.5X, 3X, and 7.5X.

Fire-Lite Alarms    Northford, CT 06472 1653
Jul 21, 2005 Dual-loop, addressable MS-9600LS is equipped with 18 A hr batteries, 8 A switching power supply, and LiteSpeedâ„¢ Signaling Line Circuit, which simultaneously polls 10 devices looking for new information at specific addresses. In under 10 sec, fully loaded panel of up to 636 devices can report incident and activate notification circuits. Devices can be wired on standard twisted and unshielded wire with distances up to 10,000 ft per loop.

Invensys Systems, Inc. / SimSci-Esscor    Lake Forest, CA 92630
Jul 21, 2005 Suited for upstream exploration and production industries, PIPEPHASE v9.0 models steady-state multiphase flow in oil and gas networks and pipeline systems. Reporting system enables engineers to generate, analyze, and present results in hyperlink-enabled MS Office Excel spreadsheets. With support for in-house-developed or third-party property packages, software includes system for generating pressure volume temperature (PVT) data and integrating user-added PVT data.

Highland Technology, Inc.    San Francisco, CA 94103
Jul 21, 2005 Electrical-to-Optical Converter, Model J720 and Optical-to-Electrical Converter, Model J730 convert logic levels to fiberoptic media for low-noise transport up to kilometers, with link jitter below 10 ps rms. Model J720 is powered by logic-level input, and Model J730 requires +12 V supply, user-furnished or from wall-plug power adapter. Model J730 provides digital logic output with risetime below 750 ps. Both use ST-connectorized 62/125 micron multimode fiber.

Viatran Corp.    Grand Island, NY 14072
Jul 20, 2005 Models 360, 363, and 364 feature Hastelloy diaphragms, allowing use in acidic and caustic medias. Suited for Clean-In-Place processes, tank level transmitter Model 360 has tri-clamp connections and recovers from temperatures exceeding 180°F in less than 1 min. Model 363 level transmitter features sealed zero and span adjustment, and also stabilizes to temperature changes in less than 1 min. Gauge or absolute Model 364 provides both pressure and level measurements.

Pico Technology Ltd    St Neots Cambridge PE19 1QB  United Kingdom
Jul 20, 2005 With 12-bit resolution, 4-channel PicoScope 3424 has 72 dB dynamic range and produces waveforms that can be vertically zoomed for greater detail. USB 2.0 connection facilitates connection and installation, and 512k memory buffer allows long-duration signals to be captured at top sampling speed of 20 MS/s. It features timebases from 500 ns/div to 50 s/div and voltage ranges from ±20 mV to ±20 V with respective accuracies of 100 ppm and 1%.

KineticSystems Co., LLC    Lockport, IL 60441-2200
Jul 20, 2005 CompactPCI/PXI module, CP387, features programmable data transfers that support 16- and 32-bit data words. Base-board provides 128 TTL level digital I/O channels, and additional 128 digital channels are provided by 4 mezzanine card expansion sites. Integral flash memory can be used to restore basic digital I/O configuration parameters on power-up, while pattern recognition and change-of-state operations are supported by base-board and mezzanine plug-on cards.

Advantech Automation Corp.    Cincinnati, OH 45240
Jul 20, 2005 Featuring 8 individually configurable channels, ADAM-4019+ enables users to convert 8 different types of analog signals to Modbus®. Universal, 16-bit module, programmed in ASCII or Modbus, provides 10 Hz sampling rate, 3,000 Vdc isolation, watchdog timer, and sensor burnout detection function. Along with 4-20 mA input, unit accepts ±10 V, mV, and thermocouple input ranges.

THK America, Inc.    Schaumburg, IL 60173 5340
Jul 20, 2005 With table size of 1,500 x 1,500 mm, Type CMX incorporates X-Y module design, where 4 hollow modules are sandwiched between, and at each corner of base plate and top table. Each module contains pre-loaded Cross LM Guide Type CSR for XY table motion, as well as Cross Roller Ring that couples XY motion of each module to top table. Large openings allow access from top and bottom. Stage produces simultaneous X-Y and rotary motion with positioning repeatability of ±1.0 mm.

Linear Technology Corp.    Milpitas, CA 95035
Jul 20, 2005 Operating from 2.8-12 V, dual Model LTC6241 and quad Model LTC6242 produce low noise of 550 nVp-p in 0.1-10 Hz region. They feature 1 pA bias current and less than 125 µV input offset voltage. Offset voltage drift is guaranteed under 2.5 µV/°C, while high voltage gain of 124 dB keeps system error to minimum. Gain bandwidth of 18 MHz and slew rate of 10 V/µs at supply current of 2.2 mA makes amplifiers suited for signal processing applications.