Sensor Products Inc.    Madison, NJ 07940
Aug 08, 2005 By assessing compression magnitude and distribution between any 2 mating, contacting, or impacting surfaces, Pressurex® aids in quality control for applications such as validation and calibration of sealing die pressure during drug packaging. Film comes in thin, clear Mylar® sheet, and when placed between contacting surfaces, instantaneously changes color. Pressure magnitude in psi or kg/cm² can be determined by comparing color variations to color correlation chart.

Smith Fibercast    Little Rock, AR 72209
Aug 08, 2005 Capable of handling corrosive acids, alkalis, and solvents, Z-Core® centrifugally cast piping system is available in 1–8 in. sizes. Corrosion-resistant fiberglass pipe has design that facilitates installation. Fittings are offered to meet same level of performance specifications as pipe, resulting in totally bonded system that protects against leaks and fugitive emissions.

Miyano Machinery USA, Inc.    Wood Dale, IL 60191
Aug 08, 2005 Measuring 87 x 52 in., Gang Tool Lathe, Model BX-26S features 3D linear turret and traverse-type identical left and right spindles, both with 5 hp, to ensure stable cutting from end to end. High-speed turning of 8,000 rpm max is possible with built-in spindle motors and high-rigidity linear guides. Operation is facilitated by Y-axis and C-axis on either spindles, with 8 revolving tools, allowing Op 10 and Op 20 machining in one setup without handling.

Kurt Manufacturing Co., Industrial Products Div.    Minneapolis, MN 55413 1540
Aug 08, 2005 Constructed of 80,000 psi ductile iron bodies with precision machined steel components, HDL ClusterTowersâ„¢ are intended for mid-size and larger machining centers. They have quick change jaws and provide repeatable clamping to 0.001 in. Self-adjusting holding block of front or back jaw enables clamping of same or dissimilar sized parts. Clamping stations are 6 in. wide with 4 in. opening. Each delivers up to 6,316 lb of clamping force at 70 lb of torque.

Blue Blade Steel    Kenilworth, NJ 07033
Aug 05, 2005 High carbon alloy strip steel is custom-finished in heat tempering process that delivers distortion-free material required to hold critical tight tolerances. Use of pre-treated strip steel eliminates need for off-site secondary heat-treating process and reduces flatness issues as well as defects and sorting of out-of-tolerance parts.

Quicksilver Controls    San Dimas, CA 91773
Aug 05, 2005 Featuring sixteen 5–24 Vdc, isolated, bi-directional I/O and 4 analog inputs, SilverDust IGB provides closed loop control for NEMA 17 and NEMA 23 frame I-Grade motor/encoders. Single-axis unit accepts 12–48 Vdc input power and has voltage clamp circuit that dissipates excess power regenerated during rapid decelerations. Along with breakouts for power, communications, and I/O, product has 32K non-volatile memory, PVIA™ servo loop, and electronic gearing.

Tank Components Inc.    Springfield, MO 65806
Aug 05, 2005 Available in stainless steel or nickel alloys, Model TCI-02 has no crevices for product built-up, making it suited for pharmaceutical and other contamination-sensitive processes. Self-draining in CIP applications, assembly also withstands autoclave conditions. Hinge design with spring-assist minimizes lift below 20 lb, while safety lock secures cover at 110° in open position. Standard diameters range from 14–36 in. No tools are required to tighten cover.

Heidenhain Corp.    Schaumburg, IL 60173-5337
Aug 05, 2005 Suited for dynamic extended travel applications, sealed LC 182 offers constant signal quality over entire measuring length and resolution down to 0.02 µm. It incorporates single-field scanning method that utilizes single scanning window, mitigating any effects of contamination. With EnDat as well as other absolute interfaces and max traversing speed of up to 120 m/min, unit is suited for use in linear motor and high-speed machines tool applications.

Optek Technology, Inc.    Carrollton, TX 75006-6905
Aug 05, 2005 Color Sensor Assembly combines white LED with reflective color sensor chip in miniature plastic housing. Self-correcting LED illuminates surface of object or liquid being sensed, while sensor chip measures hue, saturation, and luminance values of light reflected from surface. Assembly housing is 1.08 x 0.675 x 0.26 in. with 18 in. wiring harness. Applications include pill sorting, ink and/or paper color detection for office machines, paint, textiles, and cosmetics.

Gee Plus Inc.    Elgin, SC 29045
Aug 05, 2005 Measuring 1.85 in. OD x 1.26 in. long, Model VM4632 produces 8.1 lb force and provides 0.4 in. stroke with 210 W input at 10% duty cycle. Continuous force reaches 2.7 lb. Measuring 3.15 in. OD x 2.13 in. long, Model VM8054 provides 31.5 lb force and develops 1.26 in. stroke with 500 W input at 10% duty cycle. Continuous force is 10.1 lb. Two intermediate motors, Models VM5042 and VM6548 develop peak force values of 12.4 and 17.12 lb at 10% duty cycle respectively.

Advanced Power Technology - Europe    Merignac 33700  France
Aug 05, 2005 Manufactured in isolated packages, Field Stop Trench Gate IGBT standard power modules include 600, 1,200, and 1,700 V devices in SP4 and SP6 packages with min VCE(sat) saturation voltage of 1.5, 1.7, and 2 V. Modules are offered in 10 configurations, including buck, boost, dual common source, full bridge, triple phase leg, and triple dual common source. Optimal switching frequency is 20, 10–20, and up to 10 kHz for 600, 1,200, and 1,700 V units, respectively.

TKF, Inc.    Cincinnati, OH 45203
Aug 05, 2005 Designed for vertical storage, custom-designed Flighted Lift buffers product during peak production times or when surges occur during conveyance. Loading can be accomplished from any level by using pusher, and single or multiple discharge points can be utilized in C or Z configuration. Effective with FIFO or LIFO material handling strategies, unit is controlled through mechanical linked drive chains that allow lifting chains to run in opposite directions.

Viking Industries L.L.C.    Lake Forest, IL 60045
Aug 05, 2005 Equipped with ½ hp motor, heavy-duty Model VDG 50-250 features steel body with front exhaust to help clear work area of chips. In-line design makes grinder suited for confined work areas.

J. W. Winco, Inc.    New Berlin, WI 53151
Aug 05, 2005 Offered with swivel or fixed brackets made of stamped steel, abrasion-resistant casters offer smooth running performance for loads to 330 lb. Swivel type has double ball bearings in swivel head and is available with stop-fix brake. Available in 100 or 125 mm dia, wheels are natural white nylon with gray elastic solid rubber inner cushion ring that absorbs noise (-10 dB). Wheel centers are black nylon with shock- and impact-proof, corrosion-resistant ball bearings.

Aviel Electronics    Las Vegas, NV 89118
Aug 05, 2005 Designed for cables with jacket OD from 0.73–½ in., LC and LT Connectors can also be adapted to smaller diameter cables. Units are rated to 5,000 V standard, and up to 10,000 V with specific cable preparations. Operational range is DC to 1 GHz. Specified to MIL-PRF-39012 or MIL-C-3650 standards, both connectors maintain 50 ohm impedance, but are not interchangeable.

Elmo USA Corp.    Plainview, NY 11803
Aug 05, 2005 For indoor surveillance, PTC-401C IP Network PTZ camera combines digital video output from built-in web server and analog video output. It makes digitized video available over LAN, WAN, or public Ethernet connections and uses removable IR cut filter for low-light imaging. Along with audio functions for videoconferencing, unit employs ¼ in. IT 410,000 pixel CCD and provides up to 192x magnification with 12x optical zoom and 16x digital extender.

Mosaic Industries    Newark, CA 94560
Aug 05, 2005 Mosaic Handheld integrates 3.4 in. graphics display, keypad with customizable overlay, expansion I/O bus, and power conditioning and battery charger circuitry. Up to 4 I/O expansion modules can be plugged inside instrument to customize platform for specific application. Processor Board hosts 16 MHz Motorola 68HC11F1 microprocessor, and on-board I/O includes 8 digital I/O lines, 8 analog inputs, synchronous SPI serial interface, and dual RS232/485 ports.

Nanion Technologies GmbH    München   Germany
Aug 05, 2005 Port-a-Patch© throughput-optimized patch-clamp automat uses technology based on micro-structured chip that facilitates electrophysiological experiments for ion channel screening. With compound consumption in microliter range, workstation performs measurements in automated manner and obtains whole dose response curves from single-cell experiments. Fluid exchange rate on chip allows for experiments on voltage-gated as well as ligand-gated ion channels.

Datakey Electronics Inc.    Savage, MN 55378
Aug 05, 2005 Compatible with company's Keyceptacles® and Receptacles, 32 Mbit (4 MByte) serial flash memory Key (SFK32Mbit) and SlimLine(TM) Extended Token (SFX32Mbit) feature solid molded construction with wear-resistant exterior. Memory is accessed by SPI-compatible bus with up to 25 MHz clock rate. Due to memory size and bus speed, products let designers of microprocessor-controlled systems move data in and out of systems without requiring network connection.

KernelPro Software    Vancouver   Canada
Aug 05, 2005 Advanced Virtual COM Port v2.3 enables users to create 2 virtual COM ports locally or on 2 remote computers and connect them with virtual null-modem cable. Created ports have same look and functionality as physical ones. User can also share physical COM ports on local network or Internet through TCP/IP connection. Supporting hot plug and play as well as 64-bit platforms, software can also provide access to physical COM ports over network.