Crystek Crystals Corp.    Fort Myers, FL 33913
Aug 19, 2005 Requiring external frequency reference and supply voltages for internal phase lock loop and VCO, Model CPLL66 is programmed using standard 3-line interface. Typical phase noise at 4 GHz is -90 dBc/Hz at 10 kHz offset with 0 dBm minimum output power. Housed in 0.6 x 0.6 x 0.15 in. SMD package, Model CPLL66 is suited for digital radio equipment, fixed wireless access, satellite communications systems, base stations, portable radios, and test instruments.

Acrosser Technology    Cypress, CA 90630
Aug 19, 2005 Supporting Intel Pentium II/Celeron up to 1.4 GHz as well as VIA C3, half-size Model AR-B1642 is equipped with 32-bit PCI interface and can be integrated with various PCI devices into PCI backplane system. For graphics-intensive applications, board features integrated AGP 8X graphics core, 128-bit 2D/3D graphics engine, MPEG1/2 decoder, and LVDS output. It supports USB 2.0, 10/100 Mbps LAN, AC 97 audio, COM ports, parallel port, and E-IDE.

J. W. Winco, Inc.    New Berlin, WI 53151
Aug 19, 2005 Metric Aluminum Two-Way and Base Plate Connector Clamps are available in black powder coated finish or natural color with matte shot-blast finish. Clamping bores are machined and designed for metric tubing types GN 990, DIN 2391, DIN 2395, and DIN 2462. Clamp fastener assembly choices include socket cap screws, hex cap screws, or adjustable levers. Applications include vertical or horizontal tube mountings for machine guards, gates or railings.

Supertex Inc.    Sunnyvale, CA 94619
Aug 19, 2005 Designed to drive 2 electroluminescent (EL) lamps with combined area of up to 3.5 sq. in., HV841 and HV839 high voltage driver ICs deliver low-noise backlighting solutions for dual LCD and keypad applications. Model HV841 accepts 2.0–5.8 V and produces nominal regulated output of 100 V, while HV839 provides nominal regulated output of 90 V. Both are available in 10-pin, lead-free, RoHS compliant MLP and MSOP packages for lithium-ion and alkaline battery applications.

Uson L.P.    Houston, TX 77041
Aug 19, 2005 Qualipak-L 783 flexible, repeatable leak test system enables normal packaging to be returned to line and contents of leaking packages to be reclaimed. Able to find leaks as small as 25 microns, system consists of Model 1100 test instrument, vacuum source, and aluminum chamber. Infills, used for volume reduction, allow for testing of varying container sizes. As audit tester, chamber accommodates up to 30 x 24 x 8 in. gusseted bag. Test cycles last under one min typ.

Rockwell Automation    Milwaukee, WI 53204
Aug 19, 2005 Offering scalable functionality, Enpac 2500 provides condition monitoring and analysis for rotating equipment to help identify and correct problems before they impact production and safety. It uses Spike Energy and ESP technology for early bearing wear detection and includes internal laser tachometer to take speed and phase measurements. Along with icon-driven menu system and 1/4 VGA color display, product delivers 2-plane balancing and 2-channel functionality.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
Aug 19, 2005 Featuring 52 x 32 in. cabinet, Model RSSA-6 is suited for automated surface treatment in work cell. Rotary spindle may be fitted with up to 24 in. dia turntable or with quick-change fixture designed to hold each type of component. Workpiece rotation and speed are adjustable during exposure to blast media, and timed airwash blow-off cycle follows impact treatment. Up to 4 suction-blast guns or 2 pressure-blast nozzles are mounted on telescoping brackets in blast chamber.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Aug 19, 2005 Manufactured in 6 x 6 mm QFN-28 package, ADS8372 successive-approximation (SAR) ADC features 16-bit no missing code performance and 600 kSPS data rate. It ensures integral nonlinearity less than 0.75 LSB and differential nonlinearity less than 0.5 LSB. Along with fully differential, pseudo-bipolar input range, unit offers 16-bit capacitor-based architecture with inherent sample and hold, 4.096 V internal reference, internal reference buffer, and conversion clock.

FKI Logistex North America    St. Louis, MO 63132
Aug 19, 2005 Using RFID-tagged baggage totes, CrisBag(TM) provides sort, track, and trace capabilities, as well as full baggage sortation and transportation. When used for early bag storage, baggage stays in tote and is transported to vertical storage rack. Sort allocation computer uses flight time information to optimize transport and storage of bags. With capacity of 2,700 bags/hour per line, CrisBag travels at speeds of 5.9 fps on curves and up to 23 fps on straights.

3M    St. Paul, MN 55144
Aug 19, 2005 Semi-automatic 3M-Matic(TM) S-867 instantly applies 9-36 mm Scotch® Tapes at speeds up to 50 L clips per minute. Control panel deters operator tampering, while controlled tape leg length prevents waste, and buffing rollers assure secure tape closure, even close to corners. System applies Scotch filament tapes, Scotch box sealing tapes, and Scotch strapping tapes.

Curtiss-Wright Controls, Inc.    Gastonia, NC 28052-1167
Aug 19, 2005 PowerPC-based 6U VME64x Board, Manta QX3, features on-board support for StarFabric point-to-point, switched backplane and chassis-to-chassis interconnect fabric. It includes quad 1 GHz PowerPC 7457 processors, each with 512 Kb of L2 cache and 2 Mb backside L3 cache. Delivering sustained data rates exceeding 400 Mbytes/sec, air-cooled Manta QX3 offers range of memory options including 512 Mb, 1 Gb, or 2 Gb of DDR SDRAM with ECC protection.

Red Lion Controls    York, PA 17406 9428
Aug 19, 2005 Master Controller Module allows machines to be controlled and monitored via any networked PC with web browser. Controller can log system data directly to CompactFlash in Microsoft Excel-compatible CSV files. In temperature control applications, unit can accommodate up to 32 loops, controlling up to 16 hot-swappable dual PID modules. In data acquisition configuration, Master Controller monitors up to 16 modules, each with 14 points for up to 128 I/O.

Gefran ISI, Inc.    Winchester, MA 01890
Aug 19, 2005 Suited for operation in potentially explosive atmospheres, Series MX4 melt pressure transmitters feature pressure ranges from 0–360 to 0–30,000 psi with accuracy to ±0.25%. Loop-powered output enables direct link to DCS or computer systems. Carrying FM certified approval ratings, MF Series is rated for operation in Class 1, Division 1, Group A, as well as Class 1, Division 1, Groups B, C and D. Max operating pressure is 30,000 psi for mercury filled models.

Schneider Electric    Palatine, IL 60067-7399
Aug 19, 2005 Utilizing neural network technology, PowerLogic® Sepam Series 80 digital relay provides percentage-restraint current differential protection for 2-winding transformers and machines. It is offered with user interface choices of none, backlit LCD, or oversized mimic/phasor diagram LCD. With self-testing feature that monitors internal health, relay also provides phase-shift diagnostic data display and analysis for verification of CT and VT connections and performance.

Advanced Systems Concepts Inc.    Hoboken, NJ 07030
Aug 19, 2005 To assist with real-time interrogation of enterprise data, ActiveBatch v5 supports job execution on Windows 2003/XP/2000/NT, Linux, IBM AIX, Sun Solaris, HP-UX, HP Tru64 Unix, and OpenVMS platforms. Job Plan feature implements simple or compound job streams and relationships with host of global objects, while Job/Plan Variable Support enables information to be retrieved by job and/or passed between jobs. Software also offers 4 standard client interfaces and optional web server.

Flomerics Inc.    Marlborough, MA 01752
Aug 19, 2005 Flotherm and Flo/EMC v6 generate 2 different meshes, one optimized for thermal simulation and one for EMC simulation. Geometric feature changes in design propagate between models while leaving mesh refinements intact. Able to access web-based SmartParts3D library directly, Flowtherm allows users to create compact models that accurately describe electromagnetic signature of radiating items. Visualization in Flo/EMC enables viewing of user-defined excitation waveforms.

Cubic Designs Inc.    New Berlin, WI 53151
Aug 19, 2005 Engineered to meet all building codes including uniform and point load requirements, Cubic Handrail features intermediate railing connection that allows for expansion of handrail sections. Square tubing design facilitates cleaning, and continuous top rail provides finished appearance. Handrail is suited for loading docks, production areas, assembly lines, elevated in-plant offices, work platforms, equipment crossovers, landing areas, and mezzanines.

Control-Mark; A Division Of Future Design Automation    Arlington, TX 76001
Aug 19, 2005 Non-Slip Canlock® System withstands vibration in applications such as elevator, railroad, motor control centers, HVAC, and land-based drill rigs. Unit eliminates rework due to covers that slip when equipment moves from one site to another.

Linear Technology Corp.    Milpitas, CA 95035
Aug 19, 2005 Featuring 1.2 MHz constant frequency operation, Model LTC3204B-3.3 generates regulated boosted output voltage of 3.3 V from minimum input voltage of 1.8 V at output currents up to 50 mA, while Model LTC3205B-5 produces 5 V from minimum of 2.7 V input voltage at currents up to 150 mA. Both include automatic soft start circuitry to prevent excessive inrush current during startup, and are suited for applications that are sensitive to variable-frequency operation.

Rayven, Inc.    St. Paul, MN 55104
Aug 19, 2005 Rayven 924 Vinyl Bumper Stickers are backed with permanent removable adhesive that will stick to chrome, paint, magnets, and glass. Measuring 4 mil, white vinyl face sheet is matte with receptive inkjet top coating, which makes it suited for bright, vivid colors. Vinyl is backed with 6 mil paper liner, creating 11.5 mil finished product. Available in 8.5 x 11 ft sheets and master rolls, Rayven 924 is water-resistant with pigment inks.