Door Engineering & Mfg. Co.    Kasota, MN 56050
Oct 12, 2005 Standard on all 4-fold and industrial door systems, Electric Safety Edges are manufactured for true multidirectional contact and are effective throughout travel of door. Edges withstand up to 5 million cycles, feature adjustable snap-in housings to facilitate installation, and are UL/CUL recognized. Options include fail-safe wiring, intrinsically safe wiring, and IP67 fully sealed housing for washdown facilities.

Bison Gear & Engineering Corp.    St. Charles, IL 60174
Oct 12, 2005 Mounted on gearcases, Bison 100 and 300 Series are comprised of 12 V, dc parallel shaft motors with 1/20-1/6 hp ratings. PMDC (Permanent Magnet Direct Current) motors in 100 Series offers continuous torque ratings to 100 lb-in., while those in 300 series are rated for up to 300 lb-in. torque. Both series are offered with multiple voltage and speed options.

Pacific Handy Cutter, Inc.    Costa Mesa, CA 92626
Oct 12, 2005 With 3-button design, RZ3 Safety Utility Knife enables ergonomic carton cutting for right or left hand and top power cuts. Forward button positioning reduces thumb fatigue and repetitive motion injuries. Safety point blade reduces puncture wounds and damage to merchandise.

Kinetic Systems, Inc.    Boston, MA 02131
Oct 12, 2005 Suited for heavy, tall, or moving loads, 1200 Series Vibration Isolation Workstation employs Active-Air Suspension to handle up to 2,800 lb loads, including those with high centers of gravity. Vibration-controlled work environment has vertical natural frequency of 1.6 Hz at load and vertical and horizontal isolation efficiencies up to 93% and 88% at load. Along with automatic leveling system, series is available with retracting casters and choice of 1 and 4 in. thick tabletops.

Pacific Handy Cutter, Inc.    Costa Mesa, CA 92626
Oct 12, 2005 Featuring blunt tip to safely open boxes, use of T1 Tape Splitter eliminates razor blades from workplace, minimizes accidents, avoids injury to workers, and prevents damage to merchandise. Ergonomic handle maintains neutral wrist position for worker comfort.

Wilson Doors, Inc.    Elkhorn, WI 53121
Oct 12, 2005 Housed in NEMA 12-rated enclosure, 230 V single-phase AC Drive provides controls for up/down and stop. Standard operation is auto locking and un-locking, requiring only momentary push of button. Thru-beam photo eyes and mechanical upper override disconnect are standard. With AC drive, door initially operates slowly, and then smoothly accelerates once it reaches certain height. When door is at top of stroke, it slows down and softly stops.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Oct 12, 2005 Designed for passive optical networks as well as high-speed telecommunications and computer networks, Model N4373A LCA features NIST-traceable opto-electrical converters at wavelengths of 850, 1,310, and 1,550 nm for optical interfaces, in addition to differential and single-ended electrical interfaces for 3, 8.5, 20, and 67.5 GHz. Unit provides analysis for all network component categories such as laser drivers, amplifiers, transmitters, optical modulators, and photodiodes.

Berkeley Varitronics Systems    Metuchen, NJ 08840-1217
Oct 12, 2005 Capable of 2.4 and 5 GHz monitoring and recording via PC, Caterpillar(TM) Wi-Fi frequency and power analyzer comes with software for real-time, detailed X-Y graphing of dBm; user threshold settings; and live or recorded playback. Connected to laptop, unit provides portable tool for AP/NIC analysis and verification within WiMAX network. Handheld sweeping analyzer can verify and analyze output packet power levels, report channel and frequency, and create 802.11 power profile.

Anver Corp. - Anver.Com    Hudson, MA 01749
Oct 12, 2005 VPFL Lifter operates with hoist for handling compact, non- and semi- porous loads of up to 2,000 lb in tight spaces. Equipped with single foam pad attachment, air-powered vacuum lifter has ergonomic handle for lifting and moving loads. Lifter operates using Venturi vacuum pumps, which are unaffected by dust and debris, and has low-profile, welded steel lifting frame as well as integrated vacuum guard system with check valves, gauge, and air filter.

Alemite LLC    Fort Mill, SC 29715
Oct 12, 2005 Without requiring air or electricity for operation, manual pumps safely transfer variety of fluids. Red pumps are designed for use with petroleum-based liquids, blue pumps work with general-purpose fluids, and green pumps handle aggressive chemicals. Remote dispenser allows user to dispense fluids up to 10 ft from pump. Depending on type of operation, air adapter allows for conversion of each pump from manual to pneumatic.

Beckhoff Automation LLC    Minneapolis, MN 55337
Oct 12, 2005 Designed for PC-based machine tool control systems, CP6842-xxxx and CP7842-xxxx Control Panels feature U-shaped arrangement of control keys and can integrate multiple control functions in keyboard extension below display unit. Built-in CP6842-xxxx models are protected to IP 65 (front)/IP 20 (rear) and designed for control cabinet installation, while CP7842-xxxx models are IP-65-rated and can be installed at machine. Both offer aluminum housings and 6.5-20 in. displays.

Emerson Process Management    Austin, TX 78754
Oct 12, 2005 Smart Remote Automation, as extension of PlantWeb® digital architecture, enables continuous diagnostics to be run at remote sites and connect in real-time to centralized operations centers for predictive operations and maintenance. Allowing centralized access to information for regulatory compliance and reporting via device alert tracking and audit trail, system provides health of such equipment as pressure, temperature, flow, and level transmitters as well as control valves.

Curtiss-Wright Controls Embedded Computing    Leesburg, VA 20175
Oct 12, 2005 Offered as single-slot PCI card, Advantage-Zeta supports up to 3 analog videos inputs and 8 digital radar inputs and allows use of DVI graphics cards in radar display architectures. Radar scan converter creates one or more PPI views of radar video, providing display up to 1,600 x 1,200 pixels. Supporting range correlation, card can sample radar video at up to 50 MHz and reduce down to programmed return length of 2,048 or 4,096.

Malvern Instruments Inc.    Westborough, MA 01581
Oct 12, 2005 Able to probe weak or sensitive material structures and low-viscosity systems, Bohlin Gemini HR nano enables measurement and control of nano-torque levels and retains continuous working torque range to 200 mNm for complete rheological characterization. Modular product, featuring air bearing design coupled with Rotonetic(TM) 2 DSP drive system, allows torque and speed control across all steady, dynamic, and transient test modes. It can perform strain and stress controlled tests.

National Instruments Corp.    Austin, TX 78759-3504
Oct 12, 2005 Delivering distributed intelligence, LabVIEW 8 enables engineers and scientists to design, distribute, and synchronize intelligent devices and systems. It features project-based environment for developing and managing large-scale applications as well as Express technology for instrument control. Engineers can use graphical platform for data transfer, deterministic real-time communication, and network synchronization with integrated alarms, events, and data logging.

National Instruments Corp.    Austin, TX 78759-3504
Oct 12, 2005 Engineers can use NI PCI-1588 Interface to synchronize clocks and events on multiple distributed devices with submicrosecond precision using IEEE 1588 precision time protocol. It uses RJ-45 Ethernet cabling and can operate as either master or slave clock module. Future time events and time stamping capabilities can be used to correlate events distributed across Ethernet network. Onboard FPGA let engineers adjust frequency and phase of onboard IEEE 1588 clock.

INFICON    East Syracuse, NY 13057 9714
Oct 12, 2005 Immune to careless or untrained operation, Protec P3000 features I-Guide operator-guiding mode that minimizes error by ensuring correct number of locations on each unit under test is checked and that each location is tested for predetermined minimum time. It offers multiple alarm functions and displays leak rates in refrigerant-equivalent leak rates, taking into account difference in fill pressure between helium and refrigerant charge as well as dilution of helium.

Littelfuse, Inc.    Des Plaines, IL 60016
Oct 12, 2005 Designed for dense board telecom applications and customer premises equipment, RoHS-compliant Teccor® Q2L Series SIDACtor® device features 1.0 mm height on PCB and delivers telecom protection in chip scale package size. Unit provides bidirectional transient voltage protection and offers various Ipp ratings: 75 A for 5 x 310/10 x 700 µs event (ITU/YDT waveform), 80 A for 10 x 1000 µs event (GR 1089 waveform), and 100 A for 10 X 560 µs event (TIA-968).

Electro Standards Laboratories    Cranston, RI 02921 3403
Oct 12, 2005 Enclosed in all-aluminum case, Model 4875 allows access to 2 computer/servers from single set of KVM devices. Switch is actuated by depressing front-panel pushbutton or through rear-panel remote control port. Keyboard ports are transparent to all data, and mouse port connections support PS/2 mouse emulation as required to non-connected computer/server. Monitor/video port signals are regenerated and driven and support up to 1,920 x 1,440 resolution, bandwidth 200 MHz.

DIRAK    Chantilly, VA 20151-1220
Oct 12, 2005 Featuring D-SNAP technology, SNAP-LINE Handles require only moderate pressing motion for installation on prepared panel. Design eliminates risk of screws that can loosen over time and fall out onto sensitive equipment, causing damage. Handles hold securely in place, even in severe vibration environments. Made of zinc die-cast, SNAP-LINE handles are available in several different types including grab, pull, and concealed models.