SICK, Inc.    Minneapolis, MN 55438
Oct 20, 2005 With beam spacing of 300, 400, 450, 500, and 600 mm, multiple light beam safety device, Model M4000, offers mounting flexibility via 3-groove housing and swivel mount end caps. Corner mirrors enable unit to protect up to 4-sided applications, such as entire robot cell. Integrated LED status indicator mounted on end cap is visible from any direction. Model M4000 requires no PC and can be directly linked to AS-Interface Safety-At-Work bus.

Devcon    Danvers, MA 01923
Oct 20, 2005 Consisting of alumina-filled epoxy compound, Ceramic Repair Putty(TM) is engineered to form smooth barrier against abrasion, corrosion, cavitation, and chemical attack. Non-sagging product covers 66 sq-in./lb at thickness of ¼ in. Applied with trowel, putty fills voids, protecting equipment from further damage. Pot life is 25 min, and functional cure is attained in 16 hr at room temperature. Once cured, putty withstands service temperatures to 150°F wet and 350°F dry.

VIP Sensors    San Juan Capistrano, CA 92675
Oct 20, 2005 Model 1011 takes vibration and shock measurements on structures and small objects. It utilizes piezoelectric crystal material that exhibits stable output sensitivity over operating temperature range. Without requiring external power, self-generating device features frequency response range to 15 kHz and resonance frequency of 50 kHz. Each sensor features 10 ft integral low-noise cable terminated with 10-32 connector.

Bosch Rexroth Corp., Corporate Headquarters    Hoffman Estates, IL 60192-3707
Oct 20, 2005 Available in Basic, Enhanced, and Advanced versions for respective control over 6, 16, and 40 axes, IndraMotion for Packaging suits food processing and packaging applications. Motion Logic control system delivers real-time motion control combined with IEC 61131-3 compliant PLC, application-specific technology functions, and PLCopen motion function blocks. Off-line simulation and on-line tools include monitoring, debugging, and forcing for programming.

Enviroline Group (IECC)    Pompano Beach, FL 33069
Oct 20, 2005 Enviroline 58HS enables users to hold surface preparation for up to 90 days while still meeting VOC requirements. Suited for application on interior or exterior steel, concrete, and masonry surfaces, high-solids product has less than 250 g/l VOCs. Applications include large tanks requiring surface preparation and situations where humid environments exist.

Endicott Research Group, Inc.    Endicott, NY 13761
Oct 20, 2005 Generic, off-the-shelf D Series Inverters, for CCFL-backlit LCDs, fill need for customers who require inverter right away for evaluation. With profile less than 9 mm, 2-lamp Model DLDS60J generates 6 mA rms into 350-550 V load from nominal 12 Vdc source and includes display-compatible connectors. Inverters operate from 0-70°C and include on-board PWM dimming.

CADopia Inc.    San Diego, CA 92122
Oct 20, 2005 CADopia 6 enables users to export drawings as Adobe Acrobat PDF files, sweep and loft solids using ACIS solid modeling technology, export and import DWF files for viewing on web, and view ESRI and Microstation files as images. It includes External References Manager and Raster Image Support for over 100 file formats such as BMP, TIF, GIF, JPG, and CALS. Entity Snaps are optimized with extend and projected intersection options.

Kontron    Poway, CA 92064
Oct 20, 2005 Equipped with 2.8 GHz Xeon processor, FlexPAC(TM) PCI-X provides rugged platform for test and measurement environments with 3 slots: one 133 MHz PCI-X and two 100 MHz PCI-X. Expandable platform, designed for space efficiency, also features dual Gigabit LAN controller, built-in Serial ATA controller, and Mini PCI slot. Product is suited for mobile solutions.

REGO-FIX Tool Corp.    Indianapolis, IN 46268
Oct 20, 2005 Available in 4 models, BT Collet Holders are made from case-hardened steel and capable of up to 42,000 rpm. Units in ER Series come in standard and ultra-precision models and can clamp tool shanks from 0.0787-0.6299 in. Models in powRgrip Series clamp tool shanks from 0.0787-0.7874 in. and use mechanical properties of holder material to generate gripping force with run-out below 0.0001 in. All tool holders contain grooves to which balancing rings may be added.

Wurth Service Supply    Indianapolis, IN 46268
Oct 19, 2005 TineLok(TM) Fastening System prevents loss of clamp load in applications where vibration is present. Bolt design is engineered with longitudinal channels along thread, while nut incorporates 3 tines that engage bolt thread and prevent rotation of nut and loosening caused by vibration, assuring secure joint and maintenance of clamp load. Fastener requires no special tool for installation.

Analog Devices, Inc.    Norwood, MA 02062-9106
Oct 19, 2005 Housed in 9 x 9 mm package, ADIS16201 iSensor(TM) integrates ±1.7 g dual-axis ADXL203 MEMS accelerometer, digital temperature sensor, power management circuitry, and embedded firmware. With calibrated digital outputs, unit is suited for platform stabilization, machine vibration detection, and motion and positioning measurement. Frequency response can be modified through digital filtering, and dual alarm settings offer user-defined rate/threshold limits and interrupt control.

Analog Devices, Inc.    Norwood, MA 02062-9106
Oct 19, 2005 Addressing industrial data conversion needs, PulSAR® ADCs include 16-bit AD761x series and 18-bit AD763x series. Analog input ranges are software-selectable across unipolar and bipolar input ranges. Along with error correction circuits, ADCs feature serial and parallel interfaces as well as internal registers that enable flexible switching from input voltage ranges on-the-fly, with zero data latency. Sampling rates range from 250-670 kS/sec to 250-750 kS/sec.

Analog Devices, Inc.    Norwood, MA 02062-9106
Oct 19, 2005 Operating on ±5 to ±15 V supply voltage, ADA4000-1 JFET (junction field effect transistor)-input op amp utilizes iPolar(TM) trench isolation process technology for minimal power consumption and to reduce or eliminate need for heat sinks or cooling fans. Bandwidth is 6 MHz, and slew rate is 20 V/µsec. Requiring 85 µA supply current, ADR12x low-power voltage references come in TSOT-23 package and feature 9 ppm/°C temperature drift over -40 to +125°C range.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Oct 19, 2005 Serial Pulse Data Generator, Model 81142A allows engineers to conduct physical layer tests by providing high-precision, low-jitter signals. With data formats of RZ, R1, and NRZ, system provides programmable pattern and sequence generation for entire range of digital high-speed serial buses. It offers linear delay modulation up to 1 GHz for jitter-tolerance testing, and remote programmable ultra-small pulses to trigger accurate measurements.

Smart PC Solutions, LLC    Forest Hills, NY 11375
Oct 19, 2005 With 3 modes of operation, Smart PC v3.2 fixes errors and cleans-up space-wasting junk files to optimize PC operation and efficiency. Included Ensure Personal Privacy tool protects privacy while browsing Internet and guards PC against information theft. Run on Windows 95/98/NT/2000/ME/XP, software detects, diagnoses, and repairs all types of PC problems to quicken Windows startup time and application performance. Any repairs may be undone to recover from changes.

Dosch Design US Shipping Ctr.    Altoona, PA 16602
Oct 19, 2005 Viz-Images: Floral Decor contains 160 images of flower arrangements, which already include alpha-channel for placement in 3D scenes or background images by using 3D-Design/CAD software, Photoshop, or other image editing application. Images are provided in TIF, PSD, and JPEG format, and most images have minimum resolution of 2,600 pixel in height. Forty different flower arrangements are photographed from 3 side perspectives plus 1 bird's eye view.

Fluke Corp.    Everett, WA 98203
Oct 19, 2005 Combining universal generator and synthesizer, single-channel Model 396 and dual-channel Model 397 include 11 basic waveforms with adjustable parameters accessible from front panel. With 14-bit resolution, units provide 16,384 output levels, allowing video or other complex waveform to be generated with small details superimposed on large signals. Memory in both models can be divided into as many as 4,096 segments, which can be looped and linked in variety of ways.

Ross, Charles, & Son Co.    Hauppauge, NY 11788 0615
Oct 19, 2005 Available in ½ pint model, Double Planetary Mixer (DPM) handles viscous materials up to 6 million centipoise. All parts that come into contact with solution being mixed are constructed of 316 stainless steel. Machine comes with vacuum, sight/charge port, light, jacketed mix vessel, and thermocouple to sense batch temperature. Integrated control panel offers frequency inverter to control blade speeds, batch cycle timer, and temperature indication.

Enerpac (Industrial Tools)    Milwaukee, WI 53201 3241
Oct 19, 2005 Offered in 4 flow ranges, as well as single and 2-stage models, Series ZE is equipped with TEFC electric motor rated at 7.5, 3.0, 1.5, or 1 hp. Multiple valve and reservoir configurations provide application specific models to match demanding industrial applications. Optional LCD display provides diagnostic and readout capabilities. Accessories include heat exchanger, roll bars, pressure transducer, and level and temperature switches.

Saelig Co., Inc.    Pittsford, NY 14534
Oct 19, 2005 Using charge-transfer spread-spectrum sensing method, Model QT401 Slider Chip provides linear or arc-based touch-sensing output with 7-bit resolution. Device uses printed circuit resistive element as capacitive sensor and will sense through 3 mm of plastic or glass. Model QT401 can be used with clear Indium-Tin-Oxide sensing elements to create LED-backlit touch zones, or to indicate slider position after touch is released.