STMicroelectronics    Lexington, MA 02421
Nov 16, 2005 Optimizing performance of STA2051 32-bit SoC GPS baseband controller in urban regions or areas of dense foliage, Software Libraries offer STrack1 high-sensitivity feature, which allows tracking in poor satellite visibility and provides acquisition sensitivity when re-entering areas of good satellite visibility. Libraries also provide Dead Reckoning, which uses vehicle-based sensors to carry out position determination during failure or poor reception of GPS signals.

Uson L.P.    Houston, TX 77041
Nov 16, 2005 With test cycle that lasts less than one min, Qualipak-B750 Series leak testers are offered with chambers that correlate in size to containers being tested. Infills are used for volume reduction and allow for varying container sizes to be tested in each chamber. Features include anodized aluminum chamber and base, custom volume filling inserts, a PCMCIA card slot for memory storage, and touch screen input. Bench top design allows use onsite with package sealing equipment.

Pass & Seymour/Legrand    Syracuse, NY 13221
Nov 16, 2005 TradeMaster® Dimmers meet California Residential Title 24 standards for energy conservation, which require that households use high-efficiency lighting, vacancy sensors, and dimmers. They accept TM8 light module, which transforms any Decorator Combination device into illuminated product. Both single slide and dual slide units come in 600 and 1,000 W and are available in white, light almond, and ivory.

Astrodyne Corp.    Mansfield, MA 02048
Nov 16, 2005 Accepting input from 90-264 Vac, Series PSP1000 and PSP 1500 Active PFC and Parallel-Capable enclosed power supplies deliver output power of 1,000 and 1,500 W, respectively. Fourteen models provide single outputs from 5-48 Vdc. All include soft-start circuitry, integral EMI filtering, power-good LED indicator, and output adjustment potentiometer. Units operate over ambient temperature range of 0-45°C without forced cooling or output power derating.

Siemens Industry, Inc.    Elk Grove Village, IL 60007
Nov 16, 2005 Internet-based ePS Network Services supports maintenance processes while simultaneously forming platform for cross-company service and support between OEMs and machine operators. Service provides detailed information for localization of machine faults and can send service personnel notifications by email or text message if fault occurs. Direct connection to Internet with web browser allows data to be analyzed via servers as well as remote machine control.

Meese Orbitron Dunne Co. (MOD)    Saddle Brook, NJ 07662
Nov 16, 2005 Model 100P Bulk Linen Truck features tow hitch with recessed design that eliminates risk of injury due to contact with protruding hitch and prevents damage to walls, doors, and furnishings. Hitch, engineered with hole and pin design, enables bulk linen truck to be towed by variety of vehicles. Manufactured from powder-coated steel to withstand constant operation, it can be mounted on front and back of truck to permit moving several bulk trucks as a train.

Ansell Healthcare LLC    Iselin, NJ 08830
Nov 16, 2005 HyFlex® Foam Gray 11-801 gloves are suited for automotive, assembly, and construction applications that require workers to handle small, oily parts. Knitted Variable Stitch Design offers flexibility and wearer comfort in high-stress areas such as knuckles. Dipped in foam nitrile coating that reduces hand fatigue, gloves have heather gray liner and come in sizes 6-11.

John Deere Harvester Works / Cylinder Division    Moline, IL 61265
Nov 16, 2005 Offering fine detail control, Worksite Pro(TM) RL66 and RL84 facilitate grading, leveling, and contouring for skid steer operators. Attachments enable operator to complete final grade on smooth and sloped surfaces. Without disturbing sub soil, box blade with roller level has no hydraulics to impede speed and can perform landscape and site preparatory work. Cutting edge shaves surface of soil, creating bed for seeding or leveling with box blade.

Saelig Co., Inc.    Pittsford, NY 14534
Nov 16, 2005 QWheel(TM) QT511 TSSOP chip allows button to be placed in center of scroll wheel without triggering false wheel detects. Electrode consists of resistive ring element placed behind plastic panel with 3 capacitive QT sensing channels. Signals are processed to 7 bits of absolute position, and result is output on SPI serial interface. Self-calibrating unit uses spread-spectrum signal acquisition and features drift compensation as well as proximity wake-up function.

Precision Quincy Corp.    Woodstock, IL 60098 7483
Nov 16, 2005 Industrial oven product line is available with add-on Mini-Sentinel Control and Monitoring System. This system features 9 first-out alarm indicators, 4 maintenance timers, built-in batch timer, and control of exhaust and recirculation motors. Designed to facilitate troubleshooting, control/monitoring system is offered with optional auto-dialer that can alert user to triggered alarm.

Instron    Norwood, MA 02062-2643
Nov 16, 2005 Used for testing metals and other conductive materials, Model ETMT 8800 combines 8800 digital controller, Microtester(TM) test frame, and direct resistance heating system. It offers full reverse stress loading up to 3 kN and thermomechanical capabilities up to 1,500°C. Using miniature test pieces, ETMT 8800 can achieve fatigue loading rates from 20-1000 N/sec and heating rates up to 200ºC/sec. Software interface allows real-time operator interaction with system.

Instron    Norwood, MA 02062-2643
Nov 16, 2005 Comprised of digital display head and detachable presser foot probe, modular S1 Durometer can test dwell time from 1-25 sec. Audible system tells operator when time is complete, ensuring that test forces are applied for same amount of time during each test. Audible tolerance alarm can be set to identify parts that are out of acceptable hardness range. Durometer stores 256 test results and can send results to PC via RS232 connection.

ON Semiconductor, LLC    Phoenix, AZ 85008
Nov 16, 2005 Manufactured in lead-free SO-8 package, NIS6201 provides regulated output voltage that can be referenced or added to any bus voltage, allowing unit to float bias or supply voltage on top of any bus voltage. It supplies 20 mA and 8-15 V and contains internal linear regulator and charge pump. High-voltage components are external to pump and can be sized accordingly, allowing thermally protected product can handle any isolation voltage up to hundreds of volts.

Advanced Thermal Solutions Inc.    Norwood, MA 02062
Nov 16, 2005 Designed for mounting heat sinks to flip chips, BGAs, and other hot PCB components, MaxiGRIP(TM) attachment system utilizes plastic frame clip that snaps securely around component perimeter. Stainless steel spring clip runs though heat sink's fin field and fastens securely to plastic frame, mounting sink securely to component with steady, even pressure. System provides reliable attachment on vertically-mounted components and devices exposed to shock and vibration.

OK International    Garden Grove, CA 92841
Nov 16, 2005 Utilizing Smartheat technology, MFR Series Multi Function Rework System can solder, desolder, and rework complex electronics assemblies. Compact power unit offers 2 ports for attachment of various MFR Series tools, and multiple units can be interlocked to power as many tools as necessary. Offered with various heater tips and tip cartridges, system protects sensitive components from damage by ESD-safe materials and built-in ground continuity-sensing technology.

SKF Motion Technologies    Lansdale, PA 19446
Nov 16, 2005 BCU (Basic Control Unit) accommodates up to 3 SKF® Magnetic 24 Vdc actuators and can be programmed for application-focused system control. Unit is equipped with power supply, 3 motor outputs, handset, and hardwired power cable. Safety features interrupt operation upon detection of hardware electric failures; relay protection circuit eliminates risk of arcs; and security cover prevents accidental removal of plugs or other external interference.

EZAutomation    Bettendorf, IA 52722
Nov 16, 2005 Integrating control and visualization needs into one device, EZTouchPLC is suited for small to medium machines that require touch type graphical display. Micro-modular base is available with 32 I/O for 6 in. units or 64 I/O for 8, 10, and 15 in. units. Ethernet connectivity allows remote programming and monitoring, while RS422/485 port allows communication with peripheral devices. Programming software provides 3D graphical objects, 4,000 symbols, and 128 colors.

Beckhoff Automation LLC    Minneapolis, MN 55337
Nov 16, 2005 Suited for building automation, EIB Model KL6301 and LON Model KL6401 can be used to integrate HVAC sensors and actuators into bus terminal I/O system and into Ethernet networks or other fieldbus systems. Units can be connected to all Beckhoff controllers, such as BC, BX, and CX series of embedded PC controllers as well as high-end industrial PCs.

Sandvik Steel      Sweden
Nov 16, 2005 CoroMill 245 Cutters are designed for rough to semi-finish milling of steel and cast iron, while CoroMill Century System is suited for semi-finish to mirror finish milling of aluminum, cast iron, and hardened steel. Offering flexible solution for medium to large diameter face mills, cassette system facilitates adjustment of insert's axial positions for optimal surface finish or production of functional, all-purpose surface textures.

Advantech Automation Corp.    Cincinnati, OH 45240
Nov 16, 2005 Plug-and-play data acquisition module, Model USB-4711, features 100 kS/s 12-bit A/D converter with on-board 1 kS FIFO buffer. It provides up to 16 single-ended A/D input channels, two 12-bit D/A output channels, 8 digital inputs, 8 digital outputs, and 1 event counter. Module is equipped with on-board screw terminals for wiring, Windows driver, and ActiveX and LabVIEW driver support. It obtains all required power from USB port; no external power supply is need.