Red Lion Controls    York, PA 17406 9428
Dec 08, 2005 Programmed to function as dual counter or as counter with rate indication, Model CUB5 features programmable decimal point and scaling for both count and rate displays along with input programming to accept bi-directional or quadrature signals. Timer Model CUB5T can be programmed to function as elapsed timer or as preset timer. It offers 8 input operating modes and 18 selectable timer ranges, bi-directional timing capability, and built-in cycle counter.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Dec 08, 2005 Measuring humidity only or humidity and temperature, Series RH consists of polymer capacitance sensor that is unaffected by condensation, fog, high humidity, or contaminants. Two-wire unit provides 4-20 mA loop-powered output, and humidity/temperature version provides dual 4-20 mA output signals with accuracy of ±2% RH and ±0.9°F at 72°F. Outside Air model is also available.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Dec 08, 2005 Series LPI accepts 4-20 mA input signal and displays associated process variable such as pressure, flow, temperature, level, or RH. Equipped with red, 4-digit LED for local or remote indication, instrument configuration can be modified via 3 push buttons. Users can program I/O scaling, engineering units, offset, resolution, and password protection. Linearizations that can be applied to display include straight, square root, X 3/2, X 5/2, or user-defined curve.

REGO-FIX Tool Corp.    Indianapolis, IN 46268
Dec 08, 2005 Offered in 0.1181-0.7874 in. dia, powRgrip coolant flush collets feature 3 equally staggered serrations to flush coolant through toolholding systems and ensure proper amount of fluid is reaching cutting tool and chips. Design flushes coolant along sides of tool and to tip of cutter, eliminating unwanted chip particulate. Collets, made of spring steel, are metallic-sealed for pressure capability up to 2,000 psi. TIR is rated at 0.0001 in. or better.

Mastercam/CNC Software, Inc.    Tolland, CT 06084
Dec 08, 2005 Windows®-based CAD/CAM software, Mastercam X Mill includes Surface Finish Pencil Toolpath, which divides part into logical machining segments, then automatically finishes and cleans up part in single toolpath. Machine Definition stores knowledge of user's machine and control while only allowing user to perform functions that are applicable to that machine. Backplot function offers visual simulation of toolpath before actual code is created.

ERICO    Solon, OH 44139-2631
Dec 08, 2005 Made from bichromated galvanized steel, ERIFLEX® DIN Rail is offered in asymmetric and symmetric solid as well as perforated asymmetric and symmetric profiles. It conforms to EN 50035, 50022, and DIN 46277 and comes in 1 and 2 m lengths as well as various thicknesses. Also available, DIN-Rail accessories include support brackets as well as symmetric and asymmetric DIN-Rail clips. Optional cutting and punching tool is also offered.

BIG Kaiser Precision Tooling, Inc.    Hoffman Estates, IL 60192
Dec 08, 2005 Providing drill depth of 6 x diameter, Phoenix Drill features ultra-fine grain composition and is available from 1-4 mm in steps of 0.1 mm. Specially-designed flute and point geometry assure low cutting forces and chip control. Internal coolant for diameters starting at 2.5 mm makes drill suited for cutting hard and non-ferrous materials such as steel, stainless steel, and cast iron. Smooth Balzer's coating assures wear resistance and optimizes chip evacuation.

Bosch Power Tools & Accessories    Mt. Prospect, IL 60056
Dec 08, 2005 Powered by 2.4 A BLUECORE(TM) battery pack, RotoZip® 18 V Cordless Spiral Saw features adjustable foot/base that allows cuts up to 1 in. thick, and 5/32 in. collet system that accommodates XBIT(TM) accessories. Dust resistant switch protects tool against debris. With soft-grip, on-tool body and detachable handle, saw is suited for cutting out drywall, countertops, or wall tile; metal stock, pipe, and ductwork; grinding metal; and rust/paint removal for small sized jobs.

Sterling    New Berlin, WI 53151
Dec 08, 2005 Eliminating oil and oil-bearing parts, 35 in. wide Series RTCW features digitally controlled magnetic bearing system, consisting of both permanent magnets and electromagnets. It utilizes 2 independent centrifugal compressor circuits, shell and tube evaporator, and condenser components ranging from 120-190 ton capacity. Touch-screen controller allows user to retain cause of current fault and display last 25 fault conditions for troubleshooting.

Aremco Products, Inc.    Valley Cottage, NY 10989
Dec 08, 2005 Formulated by combining high-temperature resin with ceramic fibers and powders, Pyro-Putty(TM) 950 is used as gasketing compound for boilers, compressors, heat exchangers, furnaces, ovens, and exhaust manifolds up to 950°F. Product is resistant to chemical and steam attack, high pressure and vacuum atmospheres, and mechanical vibration and joint movement. Offered in 11 oz caulk gun cartridge, sealant cures in service, or before service by heating joint without pressure.

Metabo Corp.    West Chester, PA 19380 4243
Dec 08, 2005 Equipped with 4.8 V battery that drives up to 95 No. 10 x 1 in. screws on one charge, PowerMaxx can drill up to 1/8 in. in steel and ¼ in. in soft wood. Two-speed gearbox and soft-start motor deliver no-load speed of 0-200 rpm in screw mode and 0-600 rpm in drill mode. Maximum torque is 80 lb-in. Switch is designed for right- and left-handed operation, and forward/reverse lever can be switched with one finger. Tool is suited for assembly work, carpentry, and electrical work.

Universal Flow Monitors, Inc.    Hazel Park, MI 48030
Dec 08, 2005 Suited for measurement of non-aggressive gases, FlowStream® OFM Mass Flowmeters read full-scale flow rates from .5 scm to 1,000 slpm and accommodate pressures to 125 psi. Units can be programmed for measurement of air, argon, carbon dioxide, helium, hydrogen, methane, nitrogen, or oxygen. They offer standard response time of 50 ms, with 5 ms selectable option. Totalizing capability enables meter to measure, monitor, and control total amount of gas used in process.

Honeywell Sensing and Control    Golden Valley, MN 55422
Dec 08, 2005 Calibrated and temperature-compensated with on-board ASIC, ASDXL and ASDXL DO Series measure absolute, differential, and gauge pressures from 5 and 10 in. H20 to 100 psi. ASDXL DO Series features digital output and provides digital correction of sensor offset, sensitivity, temperature coefficients, and non-linearity. Output is corrected pressure value in hexadecimal format with 12-bit accuracy. ASDXL Series is amplified with analog output span of 2.0 or 4.0 Vdc.

J. W. Winco, Inc.    New Berlin, WI 53151
Dec 08, 2005 Available in threaded stem or tapped type models, Self-Lubricating Rod End Bearings control and link mechanisms in all types of machines. Units feature zinc-plated steel rod end body, bronze external ring, and ball socket made of 100 Cr6 bearing steel, hardened and ground. With operating temperature of -22 to 300°F, bearings are suited for high-load, low-speed applications with hanging angles, or those that require linear, rotational, or oscillatory motions.

Master Chemical Corporation    Perrysburg, OH 43552
Dec 08, 2005 Chlorine-free, low-foam TRIM® VHP® E812 is suited for vertical and horizontal machining centers equipped with high-pressure, through-the-tool coolant delivery systems as well as centerless, cylindrical, and creep feed grinding of ferrous and non-ferrous metals. Product does not foam while still keeping machine clean, rapidly wetting chips and tools to prevent corrosion.

Bray International, Inc.    Houston, TX 77041
Dec 08, 2005 Offered in wafer and lug style bodies, Series 40 is compliant with API 609 code and offers bi-directional sealing to ANSI Class 150, 300, or 600 ratings. Body materials are carbon steel or stainless steel for corrosion resistance, and 17-4 stainless steel valve stem is standard. Internal travel stop prevents over travel of disc, minimizing possible seat damage. Fire-safe models control flammable and hazardous fluids in petroleum, petrochemical, and chemical applications.

Schneider Electric    Palatine, IL 60067-7399
Dec 08, 2005 Featuring fully shielded metal body, Telemecanique® XS6 auto-adaptable, inductive proximity sensors incorporate self-teach mechanism to facilitate set-up. Cylindrical products are available in 8, 12, 18, and 30 mm sizes; 8 mm version does not have self-teach capability. Options include 2-wire ac/dc and 3-wire dc, with NO or NC outputs and cable or connector versions, as well as PNP or NPN in dc models.

Milwaukee Electric Tool Corp.    Brookfield, WI 53005-2550
Dec 08, 2005 Equipped with 0-2,500 spm motor, 18 Gauge Model 6852-20 features 360° swivel head that allows for optimal positioning, no matter what angle cut is needed. Tool includes ergonomic tactile grip handle for comfort, lightweight magnesium gear case for balance, and 10 ft rubber cord for mobility.

Paessler AG    Fürth D-90762  Germany
Dec 08, 2005 Continuously running on Windows system, PRTG Traffic Grapher v5 provides users of small-to-large networks with tool to monitor bandwidth usage and analyze network traffic. Network protocol analysis scans each network packet and accounts for source address, target address, and protocol, providing detailed statistics for each computer or each network application. All common methods for data acquisition are supported, including SNMP, packet sniffing, and Netflow.

ELTIMA Software GmbH    Berlin   Germany
Dec 08, 2005 Operating under almost all Windows versions, Advanced COM Port Redirector v4.0 allows user to redirect all data sent from one serial port to any other serial port, whether first port is virtual or real. Second port, created by program, provides copy of first communication port and is located on same computer. All data sent to redirected COM port is received by redirection port and vice versa.