UV Process Supply, Inc.    Chicago, IL 60614-4805
Dec 09, 2005 Featuring nominal sensitivity of 3.0 µV/BTU/ft²-hr, TFC-9000(TM) Thin Film Calorimeter quantitatively measures curability of inks, coatings, and adhesives. Pushbutton-initiated process measures exothermic heat reaction from polymerizing sample and analyzes incoming data. Test measures shelf life of stored inks and evaluates older inks to determine if they still perform to requirements. Upon test completion, stand-alone unit displays key measured test results in LCDs.

PistonSoft    Kyiv 03148  Ukraine
Dec 09, 2005 Able to split MP3 or WAV files without re-compression, Direct WAV MP3 Splitter v2.2 has built-in audio player that lets user listen to playback with adjustable speed and split it with automatic track numbering. Program can automatically split MP3 or WAV files into equal-sized parts using split by time, size, or number of parts or via automatic pause detection. Results are saved into new files, and MP3 files may be viewed using wave graphics, which can be used to set MP3 cut points.

Birchwood Casey    Eden Prairie, MN 55344 2138
Dec 09, 2005 Consisting of polyethylene film infused with metallic copper particles and activated carbon, INTERCEPT® SPS neutralizes and removes corrosive elements in air around part stored inside through sacrificial galvanic action and absorption. Natural biocides kill acid-producing bacteria, mold, or fungus. Suited for high-value products shipped overseas or stored for long periods, non-hazardous material has no chemical content, and produces no fumes or outgassing of VOCs.

Rex-Cut Products, Inc.    Fall River, MA 02720
Dec 09, 2005 Suited for repair of molds, tools, and dies, Rex-Cut® Mounted Points provide controlled grinding action by constantly revealing fresh abrasives. They are made with multiple layers of non-woven cotton fiber and aluminum oxide or silicon carbide abrasive grains that are pressed and bonded into barrel, bullet, and round shapes. Offered with choice of grit sizes and hard or soft bonds, points are suited for applications requiring minimal metal removal or light finishing.

ABA Of America, Inc.    Cherry Valley, IL 61016-9560
Dec 09, 2005 Helping to extend hose life, ABA Ultra(TM) heavy-duty hose clamps feature non-perforated band with rolled edges that moves smoothly around hose without cutting into it. Entire clamp, which consists of band, screw, and housing, is made of AISI 316 stainless steel to withstand harsh environments. Fine thread pitch optimizes clamping force generated per screw turn.

Thomas & Betts Corp.    Memphis, TN 38125
Dec 09, 2005 With both ends slotted to fit disconnect terminals from 22-10 AWG, Sta-Kon® Disconnect Installation Tool is channeled to protect wires crimped to terminals. Each end of tool includes color-coded dots that correspond to disconnect terminals. Once end of tool is matched to disconnect terminal, user pushes down to complete installation. Constructed of hardened plastic, tool is 5¼ in. long and includes clip to fit shirt pocket or pocket protector.

MadgeTech    Warner, NH 03278
Dec 09, 2005 Featuring 2 in. temperature probe and nonvolatile memory, waterproof HiTemp 150 Temperature Recorder operates from -40°C to +150°C at 0 to 100% RH with <1 min response time. Unit can be set for 1 reading every 2 sec to 1 every 12 hr. Stainless steel base provides stability for placement in autoclaves, ovens, and dishwashers. Software allows data import to Excel®, customizing of engineering units, real-time recording and alarming, and overlaying graphs.

Advanced Thermal Solutions Inc.    Norwood, MA 02062
Dec 09, 2005 Designed to characterize thermal conditions in electronic systems, Model MS 1000-CS-WC provides temperature measurements from -30 to +150°C, ±1°C and velocity measurements from 0-51 m/s, ±2%. Unit features 9.5 mm diameter base and comes in heights of 9, 12, and 20 mm. Narrow, low-profile design minimizes disturbance of heat flow in test domain, while plastic-sleeved stem facilitates installation and repositioning during testing process.

Composite Advantage    Dayton, OH 45420
Dec 09, 2005 Ranging in size from 4 x 8 to 40 x 8 ft, Composite Panels feature solid laminates or sandwich construction with fiberglass skins surrounding foam core. Solid laminates are available up to 1 in. thick, while sandwich skins vary from 0.075-0.5 in. thick with foam cores available up to 8 in. Produced using vacuum infusion, panels are lightweight, corrosion-resistant, and offer dynamic alternative for containers, walls, floors, walkways, and storage sheds.

DP Technology Corp.    Camarillo, CA 93012
Dec 09, 2005 ESPRIT 2006 delivers full-spectrum programming for 2-5 axis milling, 2-22 axis turning, 2-5 axis wire EDM, multitasking mill-turn machining, and B-axis machine tools. Opened automatically when NC code is generated, NC editor includes tabbed file manager and provides users with immediate view of code after it is processed. Report Generator creates HTML and PDF machining reports that provide complete shop floor information for milling, turning, and wire EDM machining processes.

Thermadyne Industries, Inc.    St. Louis, MO 63017
Dec 09, 2005 Featuring in-line, balanced carrying case, Victor® Portable Totes are professionally equipped to perform critical HVAC and commercial job cutting and welding tasks. Medium-duty 100FC torch handle with CA1350 cutting attachment and W-1 welding nozzle (size 0) provide cutting ability to ½ in., 4 in. with accessories, and welding ability to ¼ in., 1¼ in. with accessories. Totes also include 150 Series light- to medium-duty regulators with colored gauges.

Thermal Dynamics Corp.    Chesterfield, MO 63017
Dec 09, 2005 Auto-Cut 100 uses XT Torch Technology to promote cutting performance, while MaximumLife technology helps extend parts life and contributes to product's 100 A cut speed. Cutting system delivers precise cutting via use of XT-301 consumable parts cartridge system, which locates exact centerline of cut after process changes. For optimal cutting of stainless, aluminum, and non-ferrous materials, system has water mist secondary capability.

Lumitex, Inc.    Strongsville, OH 44136
Dec 09, 2005 Utilizing single 5 mm LED light source, Woven Fiber Optic(TM) panels provide backlighting solution for monochrome LCD displays in digital pressure test gauges operating in low- to mid-ambient light environments. Products deliver uniform illumination with no hot spots and can be customized with choice of colors. Use of panels has no adverse effect on sensitive, internal analog components. They consume 3.6 V, 25 mA and require no inverter or EMI/RFI filtering.

American Bright Optoelectronics Corp.    Chino, CA 91710
Dec 09, 2005 NovaBrite(TM) BWL Focused Beam Series, capable of displaying 6,500 K with 3 W input power in blue, red, green, yellow, and white, is also available as white, 120-lumen unit capable of handling up to 4.0 W. Offering alternative to incandescent and metal halide lighting, LED is available with single domed or flat lens with respective viewing angles of 60° and 120°. Design is available as complete light engine, PCB-mounted unit, mounted onto finned heatsink, or discrete LED component.

AEC, Inc.    Wood Dale, IL 60191
Dec 09, 2005 Offered in 30-100 ton capacities, Pinnacle Series is available in air-cooled and water-cooled packages, featuring brazed plate evaporators and stainless steel reservoir tank. Independent refrigerant circuits allow maintenance without downtime, while compressor staging provides capacity control. Chiller includes Allen Bradley PLC screen for control of up to 4 compressors in 2 circuits, hour meters to accumulate run time, and alarm condition indicators.

Blasch Precision Ceramics, Inc.    Albany, NY 12204
Dec 09, 2005 Offered in sizes from 10-600 mm and thicknesses from 10-50 mm, Cleen-Flo Filters are available in alumina for use with aluminum and aluminum alloys, zirconia for stainless steel and nickel alloys, and silicon carbide for grey iron, ductile iron, precious metals, copper, bronze, and brass. All come in square, round, and custom shapes with pore densities from 8-60 pores/in. Thermal and chemical stability avoids any reaction with molten metal being filtered.

Bryant Electric    Milford, CT 06460 2465
Dec 09, 2005 CIRCUITPRO(TM) Devices continually test themselves every 60 sec to verify that they are fully operational, while still providing ground fault protection. Units quickly notify user if ground fault protection has been compromised or if ground fault condition exists. Status of ground fault is indicated through red and green LED on face of device. Available in commercial grade, hospital grade, and blank face models, receptacles include 10,000 A short circuit rating.

NT Tool Corporation    Franklin, TN 37067
Dec 09, 2005 Compatible with all 100TG chucks, Series 100TG-OH features one-piece design with short slots that prevent coolant from reaching face of collet, eliminating need for rubber or silicone seals, and minimizing loss of accuracy associated with multi-piece designs. Collets are available from 15/64-1 in. in 1/64 in. increments and metric sizes from 6-26 mm.

Elo TouchSystems, Inc.    Menlo Park, CA 94025
Dec 09, 2005 Rear-mount, 15 in. LCD Model 1537L is available with choice of anti-glare IntelliTouch surface wave, AccuTouch 5-wire resistive, or surface capacitive touch technologies, plus dual serial/USB touch interface. Suited for kiosk, gaming, and light industrial applications, monitor features integrated minibezel that seals touchscreen against dirt, dust, and liquids.

Scientific Technologies Inc.    Fremont, CA 94555
Dec 09, 2005 Along with NEMA 4 enclosure that withstands water washdown cleaning, SL (Safety Limit) Series features rotatable head that provides 4 actuator mounting positions. Contact configurations are available with 2-4 sets of contacts in snap action, break before make, and make before break operating versions. All contacts are force-guided for positive operation by actuator, and long life design provides minimum of 1 million actuations.