Invensys Systems, Inc. / SimSci-Esscor    Lake Forest, CA 92630
Dec 21, 2005 Designed to address and solve complex challenges faced by process and design engineers, PRO/II v7.1, under SIM4ME common modeling framework, enables seamless transfer of data from PRO/II environment to ROMeo environment for online optimization and performance monitoring. It includes thermodynamics functionality for handling complex chemical systems, and PIPEPHASE multiphase flow simulation package for embedded upstream hydraulic network calculation.

Quest Technologies Inc.    Oconomowoc, WI 53066 4828
Dec 21, 2005 SoundPro® SE and DL Hand Held Sound Level Meter and Real-Time Frequency Analyzer Series, in combination with QuestSuite® Professional II Applications Software, perform advanced noise analyses. Multi-lingual units feature USB communications for programming and data transfers, and meter data may also be stored on non-proprietary, removable SD memory card. Both series incorporate 2 virtual sound level meters for simultaneous measurements.

Rockwell Automation    Milwaukee, WI 53204
Dec 21, 2005 RSAssetSecurity delivers centralized authentication and access control by verifying identity of each user accessing critical systems and granting or denying user's request to perform specific actions. Automation Security Assessment Services help users identify security-related issues through detailed risk analysis and development of targeted policies, procedures, and technologies to help protect automation assets.

NAVTEQ Corporation    Chicago, IL 60654
Dec 20, 2005 Facilitating travel between neighboring countries, Romania Map includes detailed road network information for capital and coverage of main roadways linking 15 cities with population of 25,000 or more. Map covers more than 11,400 km of roads including over 1,500 points of interest in 40 categories such as service stations, restaurants, and train stations. Tourist attractions such as Transylvanian Bran Castle are also included.

Linear Technology Corp.    Milpitas, CA 95035
Dec 20, 2005 Using constant frequency and current mode architecture, LTC3417 operates from 2.25-5.5 V input range and delivers up to 1.4 A continuous output current from one channel and 800 mA from other. This dual-output, synchronous buck regulator can generate 2 independent output voltages as low as 0.6 V, and its adjustable switching frequency from 0.6-4 MHz allows enables use of ceramic capacitors and inductors less than 2 mm high. Product delivers efficiencies to 95%.

Electroswitch, Unit Of Electro Switch Corp.    Weymouth, MA 02188 2913
Dec 20, 2005 Providing make and break action with ~10 msec contact transfer time, Snap-Action Rotary Military Switches comply with military requirements for ac or dc switching in high-shock, high-vibration environments. Standard models are available with up to 12 poles and 4 positions. To minimize resistance and heating, ends of stationary contacts extend outside insulating disks to serve as connecting terminals. Stationary contacts can be non-shorting, shorting, or sweep style.

Elma Bustronic    Fremont, CA 94538
Dec 20, 2005 Based on PICMG specification, EXP0 four-slot CompactPCI Express backplane contains system slot, one Type 1 slot, and 2 Type 2 slots. Backplane, featuring 10-layer stripline design and user available backplane I/O of P3, P4, and P5 connectors. CompactPCI Express supports Intel PCI Express architecture in 6U-160 Eurocard form factor. It connects cards via serial point-to-point bus with read-only bandwidth up to 2.5 Gbps or (8x) 2.5 Gbps full duplex bandwidth.

Cincinnati Test Systems Inc.    Village Of Cleves, OH 45002
Dec 20, 2005 Using helium mass spectrometer technology within vacuum chamber, leak tester complies with quality, environmental, and safety concerns in manufacture of automotive gasoline tanks. It verifies integrity of final assemblies, with all component subassemblies installed, and also provides leak tests to ensure tanks meet fugitive emissions standards for hydra carbons. Test stand controls DP to less than 1.5 psi during entire test process, which is completed in 50-60 sec.

John Deere Harvester Works / Cylinder Division    Moline, IL 61265
Dec 20, 2005 With all vulnerable machine components guarded to protect against trash infiltration and impact damage, models 544J and 624J handle up to 5 and 6 yd³ waste buckets, respectively. Both withstand airborne debris, are designed to promote operator visibility, and feature Quad-Cool(TM) cooling system. Additional features include hydraulic belly pans, front and rear hydraulic differential option, and electronically controlled, 160 or 180 hp PowerTech 6068H engine.

Lighthouse Worldwide Solutions    San Jose, CA 95134
Dec 20, 2005 Designed for 24/7 operation, Lighthouse Remote LPC 0.2 integrates into facility monitoring/management systems and continuously transfers 4 channels of simultaneous particle count data using RS-485 Modbus. Product delivers real-time data collection with sample flow rate of 100 ml/min and meets online liquid particle monitoring requirements. Areas of use include electronics, semiconductor, data storage, food production, and biotech industries.

Caterpillar, Inc.    Peoria, IL 61629
Dec 20, 2005 Designed for on-highway applications, CX28 planetary automatic transmission has 6 forward speeds and 1 reverse speed. There are 3 power take-off locations: 2 on torque converter housing at 2 and 8 o'clock, and high-output drive at rear that can be fitted with live yoke, direct drive pump, or clutched adapter. Outfitted with electronic control module, transmission uses J1939 communications protocol and delivers up to 400 hp and 1,250 lb-ft torque.

Cambridge Consultants Ltd    Cambridge CB4 0DW  United Kingdom
Dec 20, 2005 Featuring RISC architecture, Model XAP4 has both 16-bit data and address buses and is capable of running programs up to 64 kbytes. On 0.18 micron CMOS fabrication process, unit can deliver up to 63 Dhrystone MIPS at clock frequency of 117 MHz. SIF debug logic provides full control over processor and access to debug registers, together with non-invasive access to any part of processor's memory map for data acquisition while system is running.

SKF Motion Technologies    Lansdale, PA 19446
Dec 20, 2005 Promoting precise positioning in linear-actuation applications, long lead ball screws feature ball circulation system that maximizes linear speeds and minimizes noise. Products have nut with axial play (Series SL) or backlash elimination (Series BL). Also available, rotating nut design (Series SLT and BLT) allows drive motor to move with nut, resulting in linear speeds to 110 m/min. Long lead ball screw diameters range from 25-50 mm, and leads range from 20-50 mm.

Bud Industries, Inc.    Willoughby, OH 44094
Dec 20, 2005 Constructed of ABS plastic material with UL94-HB flammability rating, Grabber Style J includes top cover, bottom cover, battery door, and assembly hardware. Top of box is recessed, which is appropriate for label or keypad. Measuring 7.15 x 2.56 x 1.09 in. enclosure is available in black or light gray and accommodates 4 AA batteries.

BIG Kaiser Precision Tooling, Inc.    Hoffman Estates, IL 60192
Dec 20, 2005 Suited for finish boring tools in high-speed and dry cutting applications, ALCRONA Aluminum Chromium Nitride Inserts are recommended for finishing gray and ductile iron parts as well as applications in mild and high carbon steels. High temperature hardness also makes coating suitable for tough aerospace alloys.

Industrial Scientific Corp.    Oakdale, PA 15071 1500
Dec 20, 2005 Appropriate for industrial and non-industrial applications, 2-channel Model 820 accepts one or two 4-20 mA input signals from any gas transmitter and displays reading on LED display. In addition to local interface, controller can be part of larger digital network using ModBus RTU protocol. It includes 5 programmable analog relays for alarm and fault conditions, and when alarm conditions are reached, unit can control alarms, fans, and horns as well as emit audible alarm.

Draeger Safety, Inc.    Pittsburgh, PA 15230
Dec 20, 2005 Resistant to corrosive chemicals, single gas Draeger Pac 7000 warns of presence of harmful concentrations of carbon monoxide, hydrogen sulphide, or oxygen. It indicates peak concentration, 8 hr exposure, and short term exposure limit. If selected alarm thresholds or TWA /STEL concentrations are exceeded, instrument warns user with audible, visual, and vibrating alarms. Unit is equipped with IR interface and can be linked to PC via connecting cradle or E-Cal system.

TE Connectivity Ltd.    Berwyn, PA 19312
Dec 20, 2005 Available in 4, 6, 9, and 12 contact position versions for 20-14 AWG wire, Universal MATE-N-LOK Connectors provide environmental sealing protection to IP56 by employing wire entry seals, interfacial seal, and bulkhead seal. Four-contact position version handles up to 15 A/contact using 14 AWG wire, while 12-position unit handles up to 11 A with 14 AWG wire. Rear mount flange allows connectors to be pre-installed on wire harness.

Eurotherm Controls    Leesburg, VA 20175
Dec 20, 2005 Supported by hardware and software options, Model 6100A features digital ¼ VGA color touch screen display, while Model 6180A uses larger XGA display. Bridge software provides connection to instruments from anywhere with access to local or remote network. Available with up to 96 Mbyte of memory, recorders can use CF, SD, and USB removable media. For FDA validated applications, units offer signed operator comments, integrated audit trail, and password element controls.

Flomerics Inc.    Marlborough, MA 01752
Dec 20, 2005 FLO/PCB for Allegro v3.0 combines functional, component placement, and thermal views of design into single virtual model. With Link to Cadence® Allegro® PCB Editor, users can call up menu item on Cadence software to generate thermal model of design. Interface transfers information about PCB's geometry and components needed to perform thermal analysis. Placement updates made in FLO/PCB can be passed back to Allegro PCB Editor thus providing bi-directional connectivity.