Environmental Products & Systems, Inc.    Cedarburg, WI 53012
May 17, 2012 As drop-in replacement for Camfil Farr's part No. 32060300, Model EPS-H-031659 offers material quality and manufacturing precision that ensure correct fit and optimal performance. Cylinder-style filter, composed of pleated glass fiber/paper blend media with white, 2-part urethane end caps, measures 154 mm dia x 162 mm tall and has perforated 304 stainless steel metal shell. Each filter is tested for performance at .3 micron at 99.98% efficiency using POA-4 vapor.

Honeywell    Golden Valley, MN 55422 3935
May 17, 2012 Built on Sensotec pressure platform, Models IPG1 and IPG2 feature pressure ranges of 5-10,000 psi with accuracies of 0.15 and 0.25%, respectively. Sensors include temperature in its Total Error Band configuration, eliminating need for supplementary calculations by user. Compatible with liquids, chemicals, and gases, sensors are suitable for heavy equipment hydraulic/pneumatic monitoring, process and factory automation, and component and material test.

Sauer-Danfoss    Ames, IA 50010
May 17, 2012 Featuring function blocks supporting Environmental Protection Agency (EPA) Tier 4-emissions-compliant systems and Sauer-Danfoss products, PLUS+1(TM)-compliant J1939 Software Function Block Library helps OEMs accelerate mobile machine development. Solution offers pre-developed software blocks - basic PGN Receiver and PGN Transmitter, Diagnostic, and other message-specific blocks - supporting SAE J1939 and is configurable in PLUS+1 GUIDE v5.1 or greater.

JENOPTIK Optical Systems GmbH    07745 Jena   Germany
May 17, 2012 Hybrid-Diamond-Like-Carbon (DLC) coatings combine toughness of protective DLC (hard carbon) coatings with versatility and multispectral functionality of High-End IR coatings. Design and production processes make it possible to minimize internal coating tensions and warrant durability and adhesive power in accordance with such established testing standards as TS 1888. Spectral properties can be achieved in 2 separate wavelength ranges, such as MWIR and LWIR.

Turck USA    Minneapolis, MN 55441
May 16, 2012 With input range of 90-260 Vac, 24 Vdc Power Supplies provide safety extra-low voltage, according to EN 60950. Output voltage can be adjusted from 22.5-28.5 Vdc through use of onboard potentiometer. Featuring Class 1, Div 2 certification, IP20-rated power supplies can run in parallel for applications requiring redundancy, and include overload protection up to 150%. Devices can also bypass power failures automatically, allowing AC input to disappear for up to 30 ms without any effect on output.

Teal Electronics Corporation    San Diego, CA 92121
May 16, 2012 Intended for commercial and utility scale solar photovoltaic systems, TEALsolar(TM) is available in configurations from 8-36 strings, with options for integrated DC disconnects and transient voltage surge suppression devices. Fuses also come standard, and are available up to 30 A/string depending on number of strings and overall current rating of configuration. Rated for 1,000 Vdc applications under UL-1741 Listing, boxes are available with NEMA 3R, 4, or 4X enclosure.

Lap-Tech    Bowmanville, ON L1C2J3
May 16, 2012 Available with core materials of carbonyl, aluminum, brass, and ferrites, MD series exhibit temperature stability and can be supplied shielded or unshielded. Inductance values range from 0.01-1.5 µH, and frequencies are available from 10-500 MHz. Operating from -40 to +85°C, inductors come in widths from 4.5-12.7 mm and heights from 5-18.8 mm to accommodate usage in FM radio, satellite receiver, car navigation system, CATV, and cable TV applications.

Sunnen Products Co.    St. Louis, MO 63143
May 16, 2012 Equipped with 7.5 kW, 5-500 rpm variable speed spindle and 7.5 kW, 1-130 stroke/min DC stroker capable of producing 3,000 lb thrust, Model SV-490 brings end-to-end dwelling capabilities to machining of bores up to 8 in. in diameter. Servo-controlled rotary tool feed system produces 225 lbf-in. of torque for accurate machining with diamond and superabrasive tools. With footprint of 69.44 ft², machine has stationary column that provides stability for long-stroke machining of parts up to 2,000 lb.

Pepperl+Fuchs    Twinsburg, OH 44087
May 16, 2012 Certified for use in Class I/II/III, Division 1 and 2 hazardous locations, PowerScan D reads all common 1D barcode types and can capture damaged and difficult-to-read barcodes. Unit provides aim-and-click scanning from up to 3 ft away, with targeted guide for reading codes located close to one another. Readings are unaffected by ambient light or sunlight exposure. Featuring IP65-rated housing, PowerScan D is suited for traceability of raw materials in batch and lot tracking.

OSI Laser Diode, Inc.    Edison, NJ 08820
May 16, 2012 Available in single and stacked models, CVN Series operates from 895-915 nm at up to 188 W, with typical peak wavelength at 905 nm. Peak power is 375 W at 25°C, typical. Offered in TO18C, TO18T, TO5C, TO5F, TO5T, or 9 mm housings, fiber-coupled devices are suited for range finding, ceilometers, weapons simulation, surveying equipment, homeland security, LIDAR, and adaptive cruise control applications.

Spectra-Physics, Inc.    Mountain View, CA 94043
May 16, 2012 Integrating green-pumped Scan Series optical-parametric oscillator and Quanta-Ray® pump laser, alphaScan(TM) aids tumor detection and cancer research. System delivers greater than 50 mJ of pulse energy in near infrared, useful for biological applications utilizing hemoglobin absorption region. With rapid-scan option, system can tune up to 100 nm between alternating pulses for simultaneous detection of 2 distinct markers, or differential absorption measurement of 2 wavelengths.

AirClean Systems, Inc.    Raleigh, NC 27604
May 16, 2012 Capable of enclosing equipment up to 52 in. tall, E-Series includes 36, 48, and 72 in. free-standing polypropylene ductless fume hoods. Upper folding sash and lower access doors provide ergonomic access during manipulation, while full access design facilitates equipment insertion/removal. Typically floor mounted, enclosures pull room air through back baffle and filter chemical fumes, vapors, and particulate via bonded carbon/HEPA filtration before returning clean air back to room.

GL Communications Inc.    Gaithersburg, MD 20877
May 16, 2012 Featuring four 10/100/1000 Mbps Ethernet ports and two 1,000 Mbps optical ports, Enhanced PacketExpert(TM) connects to notebook PC through USB 2.0 interface and each port provides independent Ethernet/VLAN/MPLS/IP/UDP testing at wirespeed for applications such as BERT, RFC 2544, and Loopback. Command Line Interface feature comes in 3 modes: Console Based CLI, Client Server Based CLI, and Windows Client Server Based CLI. All functions available through GUI are available through commands.

Vista System    Sarasota, FL 34234
May 16, 2012 Flat Corner Signs, intended for interior and exterior building corner applications, come in standard sizes up to 1,000 mm wide and long and custom sizes are also available. Modular signs utilize attached floating profile that lets sign frames float a few inches from the wall. Smart Insert technology allows application of most any materials up to 3.2 mm thickness since inner channels are graded in a way that enables use of different material and thickness.

RFX Limited    Scotland EH53 0TH
May 16, 2012 Miniature precision Oven Controlled Crystal Oscillator (OCXO), RFX OS265 - 8.5, comes in 20.5 x 12.9 x 8.5 mm, shielded, metal DIL case. Incorporation of SC cut resonator produces minimum long term ageing (±0.05 ppm per year max), accelerated warm up, and accuracy from ±0.005 ppm with phase noise better than -140 dBc/Hz at +100 Hz offset. Along with quiescent current of 110 mA typ for +5 Vdc supply, module has 15 pF CMOS output and supply range of 3.3 to +12 Vdc.

GAO RFID Inc.    Toronto   Canada
May 16, 2012 Model A0010007 is multi-function ADSL2+ tester that features ISP login, IP ping tests, auto shut off function and audio and LED alarm indications. Tester functions as digital multi-meter and performs fast copper tests with DMM. It provides modem emulation, telephone call functions and line voltage indication. Handheld tester is compliant with all known DSLAMs, has memory capacity to store up to 50 records, and communicates with computer via RS232 interface.

Dataforth Corp.    Tucson, AZ 85706
May 16, 2012 Operating from 7-34 Vdc power source, MAQ®20 comprises programmable, multi-channel signal conditioning I/O modules as well as communication modules that mount on 35 x 7.5 mm gull-wing DIN rail. Backbone mounts within rail to provide power and communication interconnections. One communication module can interface to up to 24 I/O modules to create system with up to 384 channels that fits within 19 in. rack. Each I/O module has 1,500 Vrms isolation barrier between field-side and system-side wiring.

E Instruments International LLC    Langhorne, PA 19047
May 16, 2012 Supplied in 5 x 2.5 x 1.25 in., shockproof housing, VT100 measures air velocity from 0-6,000 fpm and temperature from -4 to +176°F. Along with 0.01 resolution, features include adjustable shutoff, m/sec or fpm unit selection, as well as Max, Min, and Hold functions. Ice Blue 128 x 128 pixel display can be read in light or dark environments. Handheld unit, suited for laboratories, clean rooms, air balancing, and more, comes with one 9 V battery and optional cones for air flow.

Lobster Tools/S-B Industries, Inc.    Fenton, MO 63026-2914
May 16, 2012 Powered by 14.4 V lithium-ion battery that will charge in less than 1 hour, Rivdom Cordless Riveter will set up to 3/16 in. standard rivets in all materials. Clear container collects spent mandrels to help keep work area clean. Featuring ergonomic, balanced design with comfortable grip handle, Rivdom has LED light that turns on when trigger is pulled, illuminating riveting application. Tool is packaged in plastic carrying case with battery, charger, and 4 sizes of nosepieces.

Sherex Fastening Solutions    Tonawanda, NY 14150
May 16, 2012 With 0.276 in. of stroke, FLEX-5 Rivet Nut Tool can install rivet nuts from M3-M10 and 6-32 to 3/8-24, and rivet nut studs from M5-M8 and 10-24 to 5/16-24. FLEX-5P utilizes Pull to Pressure method of installation, allowing same insert type to be installed into varying material thicknesses without tool adjustment. Utilizing Pull to Stroke method, FLEX-5S installs insert to same distance each time. Weighing 4.2 lb, tool has aluminum body, single-stage trigger, and Socket Head Cap Screw Mandrel.