Kinook Software, Inc    Colorado Springs, CO 80962-3413
Jan 24, 2006 Windows-based Ultra Recall v1.4 enables users to capture, organize, and recall electronic documents and information. Everything is stored in single file, which can be secured, transported, and backed up. Program offers appointment and reminder capabilities, auto-collapse of siblings when expanding items to eliminate tree clutter, folder synchronization, and customization of keyboard shortcuts. It integrates with Microsoft Outlook, Internet Explorer, Maxthon, and Firefox.

Innovative Solutions    Bucharest 041257  Romania
Jan 24, 2006 Run under Windows 98/2000/XP/2003, Advanced Uninstaller PRO 2006 lets users completely uninstall programs. Included installation monitor surveys software setups and keeps logs with actions done by setup procedures. Along with 20+ tools designed to help optimize PC for optimal performance, optimize registry, and protect Windows, software offers ActiveX tool, registry cleaner, and duplicate files tool that searches computer for duplicates and deletes unnecessary file copies.

Fairchild Semiconductor Corp.    South Portland, ME 04106
Jan 24, 2006 Available in lead free, 6-terminal, 1.45 x 1.0 x 0.55 mm package, Model FMS6151 transfers video images from cell phones to televisions, computer monitors, and other larger display formats. Key features include 5^th order 8 MHz standard definition filter, 2.7-5 V operation that accommodates different power supply requirements, dc-coupled inputs to facilitate video DAC interface, and choice of ac- or dc-coupled outputs.

STMicroelectronics    Lexington, MA 02421
Jan 24, 2006 Designed to operate over 2.4-5.5 V supply voltage range, Model TS4962 provides 3 W of output power into 4-ohm loudspeaker with 88% efficiency. Quiescent current with no input signal is 2.3 mA typ and standby current when powered down using active-low control line is 10 nA. Pop and Click reduction circuitry provides low on/off switching noise while allowing amplifier to start within 5 ms. Amplifier is available in lead-free, 1.6 x 1.6 mm square 9-bump flip-chip package.

Allegro MicroSystems Inc.    Worcester, MA 01615
Jan 24, 2006 Featuring isolation voltage to 1,600 Vrms, bi-directional Series ACS706 consists of low-offset linear Hall sensor circuit with copper conduction path located near surface of die. Output has positive slope when increasing current flows through primary conduction path. Units measure ac or dc currents and are suited for motor control, load detection, switched-mode power supplies, and overcurrent fault protection. Internal resistance is typically 1.5 mohm, providing low power loss.

Aaeon Electronics, Inc.    Hazlet, NJ 07730-2496
Jan 24, 2006 Based on AMD GX466/500 (optional)/533 Series CPU, GENE-5312 features DDR SDRAM support up to 512 MB, Type II CompactFlash(TM) Memory, and up to 1,280 x 1,024 @ 24 bpp resolution with UMA 16 MB display memory. For connectivity, product offers PC/104 and Type III Mini PCI expansion interfaces as well as 2 Com, 2 USB, digital I/O, and dual 10/100-BaseT Ethernet ports. Product is suited for data acquisition, industrial control, and thin client applications.

Aaeon Electronics, Inc.    Hazlet, NJ 07730-2496
Jan 24, 2006 Along with support for Ultra 1 ATA100 and 4 SATA 3 Gbps, Ethernet-ready FWB-880M features Intel® Pentium® 4 or Celeron® D LGA775 CPUs and supports 1066/880/533 MHz FSB. It has integrated GMA950 2D/3D Graphics Accelerator and offers core frequency up to 400 MHz with X16 PCI-Express slot. In addition to PCI connectors, board features DDR2 Memory Support up to 4 GB and connectivity options such as 8 USB 2.0, 2 RS-232/422/485, parallel, and IrDA ports.

Advantech Automation Corp.    Cincinnati, OH 45240
Jan 24, 2006 Combining LCD display, keyboard, touchpad, OSD control, function and cursor keys in single chassis, ATM-4233 is suitable for environment/facility monitoring and test and measurement applications. Computing platform with expansion capacity offers compatibility with Pentium 4, Pentium M, and Celeron CPU cards. Fourteen expansion slots enable use of any combination of ISA/PCI/CPU cards. Powered by ATX Standard supply, it features 2 USB ports on chassis front.

Retsch, Inc.    Newtown, PA 18940
Jan 24, 2006 With max pressure of 25 tons, manual hydraulic Model PP 25 is suited for preparation of solid samples for x-ray fluorescence and spectral analysis. Dies are available in diameters of 32 and 40 mm. Due to polished pressure plates, surface of dies is prepared to meet requirements of XRF analysis. Materials such as limestone, which do not form stable pellet even under pressure, can be stabilized with help of aluminum beaker.

Aaeon Electronics, Inc.    Hazlet, NJ 07730-2496
Jan 24, 2006 Utilizing 32-bit 586 STPC Elite or Consumer II CPU with core frequency up to 133 MHz, fanless Model PFM-532I includes 16-32 MB onboard SDRAM. It supports DiskOnChip, CompactFlash(TM), 18-bit TTL TFT, and up to 24-bit DSTN LCD. Module provides multiple and digital I/O functions like 2 COMs and 8 programmable digital in/out. Other features include PC/104 connector and 10/100 Ethernet interface.

Shimpo Instruments    Itasca, IL 60143
Jan 24, 2006 Suited for contact and non-contact applications, Model DT-209X simultaneously stores data in USB, standard, and average measuring modes. Device offers length and rate measurement; selectable units of measure; data calculation for last, min, max, and average readings; and smart settings for trigger, max, and min limits. Housed in aluminum enclosure, tachometer includes 5-digit display, ¼ x 20 mounting hole, and programmable 1 V analog output for chart recorders.

BIG Kaiser Precision Tooling, Inc.    Hoffman Estates, IL 60192
Jan 24, 2006 Intended for Speroni Models STP-34, STP-35, and Esperia presetter machines, Integrated Automatic Mechanical Clamping HSK Spindles accommodate tooling in dedicated sizes of HSK 24 to HSK 80. System applies tool clamping force of 440 lb to seat HSK tooling into tool presetter spindle similarly to way it is drawn into machine tool spindle, providing precision and repeatability. Spindles are retrofittable to existing presetter machines in customer's facility.

MTS Systems Corp. - Sensor Div.    Cary, NC 27513
Jan 24, 2006 Featuring side sealing on plastic housing, C-Series suits applications where less than 270° of rotation needs to be monitored such as rotating shafts, balances, and steering assemblies. Modular architecture is built upon base Core sensor to which application-specific features can be added, including IP67-rated packaging for environmental protection. Optional 5 and 12 V supply module allows system to support changing supply requirements.

BIG Kaiser Precision Tooling, Inc.    Hoffman Estates, IL 60192
Jan 24, 2006 BIG PLUS CAT 40 and CAT 50 dual contact taper spindle systems are engineered for Mori Seiki NT Series multitasking machines. Modular tooling system, offered in either 45° tilt or a 90° style, incorporates complete MTC® tooling system for milling, drilling, tapping, reaming, and boring operations. Automatic Tool Change for loading tools ensures location of tool holder to within 1 micron for repeatability.

IMS Company    Chagrin Falls, OH 44023
Jan 24, 2006 Microprocessor-based, closed-loop 15 A Models UATC-20 and S20-D3C are designed for Type J or K thermocouples and operate in automatic or manual mode. Model S20-D3C has mechanical setpoint control, while Model UATC-20 includes ground fault indicator, output power percentage on LED display, and electronic setpoint control. Both feature anti-arcing circuitry to help prevent accidental damage, open triac/heater indicator, over current indicator, and automatic soft start.

Advanced Thermal Solutions Inc.    Norwood, MA 02062
Jan 24, 2006 Fabricated from lightweight extruded aluminum, maxiFLOW(TM) heat sinks are utilized for cooling BGAs and hot components inside electronic systems. Featuring low profile spread fin arrays to enable convectional air cooling within restricted/low air flow conditions, they are available in lengths and widths ranging from 10 x 10 mm to 60 x 60 mm, and heights starting at 2 mm.

Methods Machine Tools, Inc.    Sudbury, MA 01776
Jan 24, 2006 Super NTJX multitasking turning center incorporates Fanuc 31iA CNC control and features more than 12 milling/turning combinations through 2 spindle motors. Generating 34.9 hp (8000 rpm) and 24.8 hp (6000 rpm) on left and right spindles, NTJX is capable of synchronized shaft/work turning with turning dia of 9.65 in.,turning length of 42.91 in., and bar capacity of 2 in. Forty-station servo-driven ATC provides 1.3 sec tool changes (tool-to-tool).

Optima Electronic Packaging Systems    Lawrenceville, GA 30043
Jan 24, 2006 Offered in 19 and 24 in. sizes, modular open-back RC Cabinets feature various frame designs, permitting surface or flush/recessed mounting options. Extruded aluminum frames offer bezel design rated at 6,600 lb static load with reinforced aluminum base and sides. Features include corrosion resistance coating and variety of rail and hole patterns. Options for dust/moisture protection, cooling, and cable management systems are available.

E Instruments International LLC    Langhorne, PA 19047
Jan 24, 2006 Capable of identifying center of any measuring area, non-contact, portable IRtec P1000 thermometer detects temperature-based malfunctions in industrial applications. Used to measure temperatures from -20 to 1,830°F, unit provides +1% accuracy, and 0.01% stability. Thermometer also features alkaline or rechargeable batteries, 500-record data memory, and programmable alarms.

Skyjack, Inc.    Guelph, ON N1H1B9
Jan 24, 2006 Powered by dual fuel engine and featuring 5 ft roll out extension deck, Models 6826RT and 6832RT have working heights of 32 and 38 ft, respectively. Featuring 68 in. wide stance, lifts are drivable at full height with deck extension fully extended. Available with 90-degree swing out engine trays and tilt out hydraulic manifold, they offer options for diesel engines and independent leveling outriggers.