Midwest Motion Products    Watertown, MN 55388
Apr 24, 2012 Accepting any 24 Vdc source, Model MMP D22-376F-24V T-03-C measures 2.24 in. dia x 5.4 in. long, including analog tach, which features output of 3.0 Vdc/1,000 rpm of rotation. Motor delivers 25 oz-in. continuous torque at 2,800 rpm, with peak torque of 150 oz-in. Unit requires just 2.4 A at 24 Vdc to generate full load torque. IP54-rated for harsh environments, motor is suited for closed loop velocity control in robotic and automation applications.

Next Generation Power Engineering, Inc.    Jacksonville, FL 32246
Apr 24, 2012 Powered by 4-cylinder, turbocharged Kubota industrial diesel engine, Gen-Air-Ator combines 35 kW Stamford Newage diesel generator with 10 hp Hydrovane rotary vane compressor producing 35 cfm at 150 psi. Running both components at 1,800 rpm as one rigid assembly minimizes vibration and noise, and eliminates need for heavy mounting frame. Measuring 87 x 23 x 36 in., Gen-Air-Ator is suited for spray foam and coatings operations.

Analog Devices, Inc.    Norwood, MA 02062-9106
Apr 24, 2012 Intended for high-efficiency AC/DC and isolated DC/DC power supply systems, ADP1046 has 7 PWM logic outputs that can be programmed using GUI with I²C interface. Adaptive dead-time control increases efficiency across entire load range, while current share and OR-ing control accommodate use in parallel and redundant systems. Other features include voltage feed-forward for accelerated line transient response as well as dedicated loop filters for soft start, light load, and normal load.

RF Industries    San Diego, CA 92126 4202
Apr 24, 2012 P2RFA-4031-01 kit features three 3.5 mm adapters with 50 ohm impedance and made of non-magnetic 303 stainless steel with beryllium copper contacts supported with bead configuration. They are designed to operate up to 34 GHz with a VSWR rating of 1.05+.006 f (f-GHz) max and have same electrical length. Coaxial connectors and adapters inter-mate with SMA and 2.9 mm connectors and are used primarily on test equipment. Kit includes male-to-male, female-to-female, and male-to-female adapters.

Sapling, Inc.    Huntingdon Valley, PA 19006
Apr 24, 2012 Provided in either black or white finish, Square Clocks include wireless, wired, IP, and Talkback models. Units feature ABS casing for durability, anti-fading polystyrene dials, stainless steel hands, and high-impact, shatterproof polycarbonate crystal. Offering option for single or double mounted displays, 12 in. model optimizes viewing clarity in any application.

Sapling, Inc.    Huntingdon Valley, PA 19006
Apr 24, 2012 Using 915-928 MHz frequency-hopping technology, TalkBack Technology provides users with 2-way communication between clocks and master clock. Slave clocks receive time as well as provide master clock with information such as battery life, signal strength, and mechanical or display status. This helps facilities managers or plant operations managers be proactive if clock needs maintenance. Also, system administrator can choose to be notified via e-mail of any changes.

Thwing-Albert Instrument Co.    West Berlin, NJ 08091
Apr 24, 2012 QuickPeek® Kit provides method for checking ink color and strength for ink maker and printer. Supplied in wood case featuring removable lid with stainless steel plate for rolling ink and testing consistency, kit consists of smooth flat plate, steel measuring bar and plunger for obtaining predetermined volume of ink, steel spatula for filling measuring bar, and pipe cleaners for cleaning holes in measuring bar. Kit helps eliminate press downtime while ensuring correct color and trapping.

InspectionXpert Corp.    Apex, NC 27502
Apr 24, 2012 InspectionXpert® for PDF 2012 and InspectionXpert OnDemand 2012 work with PDF/TIFF files created from any source to turn engineering drawings into ballooned inspection drawings and quality inspection forms. Functionality enhances drawing revision and changes functionality with ability to cut, copy, and paste balloons and/or characteristics. Solutions also support drag-and-drop re-ordering of characteristics and offer tool for working with Geometric Tolerances in inspection reports.

1Source Safety & Health, Inc.    Exton, PA 19341
Apr 24, 2012 Running on any computer, as well as Tablet PC with Touch Smart screen technology, SMARTouch helps users conduct, manage, and maintain ergonomic assessments, asbestos and lead in paint surveys, and indoor air quality assessments. Data collection consists of moving from tab to tab, clicking on drop downs, or tapping on field, ensuring consistency of data and descriptions regardless of surveyor. Pre-formatted and customizable reports are ready immediately after survey.

Borries Marking Systems    Ann Arbor, MI 48108 1623
Apr 24, 2012 Used to mark steel and other metals, electro-hydraulic AccuMarker features embossing head that can rotate 330°, illuminating diode that indicates maintenance and displays battery power level, as well as compact hydraulic power unit. Different standard tools can be inserted at top and bottom of C-frame, which has opening width that can be adjusted in increments of 5 mm up to 60 mm max. Portable tool comes in 3 power levels, providing marking forces of 18, 50, and 120 kN.

Sumner Mfg. Co.    Houston, TX 77088 4036
Apr 23, 2012 Intended for mechanical contractors, Model GH2T is available with cross beams in 8, 10, 12, and 15 ft sizes as well as 3, 4, and 5 m sizes. Two A-frames lock in folded position using plunger pins and feature removable quick action locking pin. With adjustable lifting handle, height adjustments can be made in 6 in. increments. Minimum and maximum heights from ground to lifting eye are 83 and 113 in., respectively, and maximum height to top of trolley is 113.5 in.

Super Micro Computer, Inc.    San Jose, CA 95131
Apr 23, 2012 Offering 1 GbE connectivity over 48x RJ45 ports and 4x SFP ports, SSE-G2252 and SSE-G2252P are IEEE 802.3az compliant Layer 2 switches designed for top-of-rack or standalone applications. Model SSE-G2252P is IEEE 802.3at-compliant and supports PoE. Offering networking options for data enter, cloud computing, HPC, and SMB environments, both switches provide choice of web-based GUI or CLI-based management as well as features such as jumbo frames, link aggregation, VLANs, and QoS.

Mate Precision Tooling    Anoka, MN 55303
Apr 23, 2012 Designed for Mate Original Style and AMX(TM) punch press tooling, RAPIDSET(TM) Canisters are suitable for punching material up to 0.250 in. thick. Units have non-rotating clamping head with adjustable clamping screw for setting punch length. Pre-loaded, self-contained spring pack provides consistent stripping pressure and consistent die penetration. Used with existing guides with or without pins, canisters offer grind life of 0.315 in. in 0.039 in. material with 0.118 in. die penetration.

Ergodyne Corp.    St. Paul, MN 55108
Apr 23, 2012 ProFlex® 925F(x)CP gloves employ technical, protective material (Armortex®) on entire palm to impart Level 3 cut and Level 2 puncture protection. Also, molded TPR armor on knuckles and fingers of dorsal side of hand protects from impact, pinch, crush, and bruising blows. Reinforced Kevlar® stitching promotes extended wear and durability; contoured neoprene cuff provide snug, comfortable fit; and silicone strips inside fingers keep glove in proper position.

Bosch Packaging Technology    New Richmond, WI 54017
Apr 23, 2012 FLT vial filler features 100% checkweigh and reject option and processes up to 30 vials/min. Walking beam transport design allows for small footprint, and quick changeover of vial diameter requires only 3 guideparts. Stoppering or capping of 13 and 20 mm finish is realized with single vibratory bowl, requiring only change of tracks, and it handles containers ranging from 2-100 mm. Peristaltic or rolling diaphragm pumps are used for filling, with re-usable or single-use PreVAS product path parts.

OMEGA ENGINEERING LIMITED    MANCHESTER M44 5BD   United Kingdom
Apr 23, 2012 Featuring 4-wire construction and precision 100W class A platinum element, Pt100 Surface Temperature Sensors come in standard lengths from 1-5 m and are suited for use in temperatures from -30 to 150°C. Units have water-resistant silicon patch with aluminum strip and adhesive backing for secure mounting on flat or curved surfaces. One hour after application, sensor and adhesive resist moisture to IP67 standards, making sensors suitable for outdoor or wet environments.

MP Systems, Inc    East Granby, CT 06026
Apr 23, 2012 Combining chiller and high-pressure coolant system, Model S2 can be integrated with most types of CNC machine tools, including machining centers, turning centers, and Swiss-style lathes. PLC provides real-time monitoring, directs system to respond to changing conditions, stabilizes coolant to ±1° of ambient temperature, and includes 7-day timer clock. When used with water-based coolant, S2 pumps up to 1,000 psi at 8 gpm, and with oils, it reaches up to 2,000 psi at 5 gpm.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Apr 23, 2012 Designed to generate small, manageable chips, CoroDrill® 861 drills combine Advanced Chip Management flute geometry, point geometry that helps reduce thrust forces, and double-offset margin geometry that lends to stability. Consistent edge preparation protects cutting edge from premature chipping and flaking. Able to produce accurate, deep holes to depths of 12-30 x drill diameter without pecking, drills can achieve IT8-IT9 hole tolerance when used with suitable high-precision chuck.

Telehealth Sensors LLC    Batavia, IL 60510
Apr 23, 2012 Intended for home healthcare monitoring market, Adaptive Bed Sensor can be placed above or below most mattresses and is available as wired sensor. Product, which may also be adapted via wireless transmitter, has antimicrobial properties and uses nonslip, water-resistant material. Depending on customer requirements, sensor can be programmed to monitor activity during specific times of day or set to provide continuous monitoring.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Apr 23, 2012 Constructed with self-passivating tantalum nitride resistor film on high-purity alumina or ceramic substrate, NOMCA Series features low absolute TCR of ±25 ppm/°C, TCR tracking of 5 ppm/°C, tight ratio tolerances to ±0.05 %, and long-term ratio stability of 0.05% after 1,000 hours at +125°C. Dual in-line networks offer 7 or 8 isolated resistors of equal value in 14- or 16- pin SOIC packages. Each offers resistance range of 1-50 kW and typical power rating of 100 mW.