Wright Pump    Muskego, WI 53150
Jan 13, 2006 Comprised of 5 volute and non-volute models, TRA400 series is machined from 316L stainless steel. Softsterile(TM) flushing system delivers double seal flushing, eliminating sources of contamination, misalignment, and gasket extrusion. Machined directly into casing, diaphragm valve body design results in zero dead leg casing drain. Series offers flow capacities to 320 gpm, with pressures to 190 psi at viscosities to 600 cps and temperatures to 380°F.

Panasonic Electric Works Corporation of America    New Providence, NJ 07974
Jan 13, 2006 Rated to IP67, Model PD50 can read 2D codes that are stained, chipped, tilted, or reversed, as well as from full 360° direction in approximately 30 ms. Two red LED guide lights enable installation at optimum height position. Up to 8 rejected images can be stored and uploaded via PDTOOL software.

Makita U.S.A., Inc.    La Mirada, CA 90638
Jan 13, 2006 Rated at 11.0 A, 1 9/16 in. Model HR4001C and 1 9/16 in. Model HR4010C with AVT technology feature 235-480 rpm speeds synchronized with 1,350-2,750 blows/min to prevent overlapping impacts. AVT counterbalance system minimizes vibration to 4.5 m/s², while variable speed dial with 5 preset speeds and electronic speed control minimizes speed loss. Torque limiter ensures stable torque control and disengages motor should bit bind or hit reinforcements.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Jan 13, 2006 Featuring Accu-Mate(TM) connection and 4 drive-roll Precision Drive assembly, Series 75 eliminates downtime associated with wire buckling, kinking, and birdnesting. PD drive rolls are available for hard or soft wires up to 5/64 in. PD inlet guides and Q(TM)-Gun power pin tips mate with PD continuous guides to eliminate gaps between feeder guides and gun liner. Accu-Mate(TM) connection and Q-Gun power pin provide all-brass power block for corrosion resistance and electrical conduction.

Beckhoff Automation LLC    Minneapolis, MN 55337
Jan 13, 2006 Bringing PC-based PLC and motion control together with Ethernet, TwinCAT v2.10 has functions for scanning hardware connected to systems via high-speed, deterministic EtherCAT as well as Profibus, CANopen, DeviceNet, SERCOS, real-time Ethernet, and Lightbus. It can set different update rates for different drives depending on requirements. Program also provides functional programming of remote target systems. Communication can be set up via TCP/IP, HTTP, and serial connections.

Sealant Equipment & Engineering, Inc.    Plymouth, MI 48170-0965
Jan 13, 2006 Designed for dispensing solvent-based, moisture-curing, and stringy materials such as silicones or polyurethanes, pneumatically actuated Tip-Seal® Model 2200-245-125 features 2.5 in. long carbide tip, titanium-coated shaft, hardened seat, and water-resistant fluid seals. Stroke adjuster can set needle opening to change material-flow rates and bead-profile sizes. Sealing at tip prevents material from oozing, dripping, or hardening in nozzle.

Value Engineering Alliance, The    Cambridge, MA 02139-4772
Jan 13, 2006 Used to confirm that all product information documents conform to their designs with respect to content and quality, PSIFEYE automated proofreading system enables manufacturers to detect and correct errors to prevent rework and product recalls. Supply chain productivity tool uses AVIA (Automated Visual Information Analysis) technology to identify differences exceeding user-specified size and contrast thresholds, which are then located, marked, ranked, and tabulated.

HI-TECH Weighing Systems    St. Catharines L2M 6S9  Canada
Jan 13, 2006 Hydraulic Rotation Dumper provides 180° rotation of parts containers to ensure all parts are fully discharged. Able to handle up to 60 x 60 x 60 in. containers, standard versions have dump height of 48 in. and load capacity up to 6,000 lb. Features include heavy-duty framework, manual controls, and fixed hold-down bar. Available options include 60 in. dump height, 8,000 lb capacity, pneumatically activated hold-down bar, and automatic controls.

Duff-Norton    Charlotte, NC 28241 7010
Jan 13, 2006 Offered in ¼-3 in. sizes, 1900 Series is designed to provide rotating seal between fluids and revolving roll or drum. It is suited for high-pressure applications and operates in temperatures up to 248°F. Available with nickel treated carbon steel construction as well as stainless steel construction, product employs double acting thrust bearing and bronze bushing. Commonly conducted media includes water, hot oils, chemicals, hydraulics, and air.

TE Connectivity Ltd.    Berwyn, PA 19312
Jan 13, 2006 Available as dual-row product in 2 through 10 and 16 positions, Sealed Mini Universal MATE-N-LOK connector system employs positive, polarized keys with latching orientation to facilitate assembly. Wire-to-wire and wire-to-board connector system features ganged wire seals and brass contacts with pre-plated tin or duplex gold plating rated for 600 Vac/Vdc @ 9.5 A max. Cycle durability is rated at 20, with contact retention of at least 8 lb per contact.

Jesco Products Company, Inc.    Sterling Heights, MI 48314
Jan 13, 2006 Insensitive to flow rate and moderate pressure variations, Bubble-Detect package alerts production operators or automated equipment to presence of air in fluid processing systems via triple alarm system comprised of audible, visual, and relay alarms. Inline-mounted manifold system can be added to any dispensing system for immediate air bubble detection. It has no internal moving parts, connected power receptacles, and adjustable bubble size sensitivity.

Boston Gear    Quincy, MA 02171
Jan 13, 2006 Direct-mount, worm gear speed reducer, Model CFA700 replaces heavy chain drive on material handling conveyors and is interchangeable with standard 2- and 4-bolt mounted bearings. Adapter attaches to existing side rails, so conveyor redesign is not required. Rubber mounting pads and bushing limit vibration and noise, while PosiVent® Pressure Equalization System eliminates need for conventional pressure vents, and OSHA end cap cover limits exposure to moving parts in aisle.

Avago Technologies    San Jose, CA 95131
Jan 13, 2006 Available in 870 and 940 nm wavelengths, HSDL-42xx Series Emitters are fabricated using aluminum gallium arsenide LED technology and are housed in 5 mm through-hole package. Iron lead frames dissipate power over wide range of currents. Models rated at 870 nm are suited for IR communications, whereas 940 nm units are typically used for remote-control applications.

ITW Rocol North America    Glenview, IL 60025
Jan 13, 2006 Recommended for all metals and all types of machining, environmentally safe Accu-Lube LB4600 is non-staining, has low odor, and burns off during post heat-treat processes. Base oil is made from 9 renewable vegetable sources, which act as carrier for lubricity package. Non-toxic, biodegradable products has mild, grape odor and is purple in color. Only 1-2 oz of lubricant is needed per nozzle for 8-hr shift.

RIDGID    Elyria, OH 44035
Jan 13, 2006 Used in conjunction with RIDGID® NaviTrack II(TM) or NaviTrack Scout(TM) line locators, NaviTrack(TM) Brick 5 W transmitter affords portability while locating metallic lines. Unit is resistant to water, measures 4.7 x 7.75 x 3 in., and features adjustable power output and 4 frequencies: 1, 8, 33, and 262 kHz. It transmits signal on metallic lines by directly connecting to target line, inducing using inductive signal clamp accessory, or inducing using transmitter itself.

Triple E Corp.    Lowell, MA 01852
Jan 13, 2006 VXS enclosure handles data bandwidth transfer demands while maintaining backward compatibility with all VMEbus structures. Multi-GIG RT-2 connector provides up to 6.4 Gbps switched serial traffic over PO, and on/off rocker switch operates 800 W power supply. Measuring 8U tall X 19 in. x 15 in., enclosure features all-aluminum construction with powder coat finish. Its guide deck accommodates twelve 6U x 1, 6 x 160 mm boards; 10 payload slots; and 2 switch card slots.

Mikron Infrared, Inc.    Hancock, MI 49930
Jan 13, 2006 Optimized for -40 to +120°C working range, model 7815B combines microbolometer camera with visible light camera and laser target dot to endow thermal imaging process with point-and-shoot functionality. Its 320 x 240 detector resolves area smaller than 0.1 in.² at 6 ft, resulting in thermal images free of pixelating. Both cameras offer focusing range of 12 in. to infinity. Accurate to ±2°C, camera features internal flash memory and articulating 3.5 in. LCD display.

Omega Engineering, Inc.    Stamford, CT 06907
Jan 13, 2006 Packaged in transistor (TO-5) case, PX70 Series is available in full-scale ranges from 0.3-100 psi. Model PX71 is offered without fittings for gauge and absolute ranges, while PX72 has top-mounted tube fitting and bottom vent. Also available in gauge ranges, PX73 has bottom tube fitting and top vent. For differential measurements, PX74, with top and bottom tubes, can be used for uni- or bi-directional results. PX70 models are compatible with clean, dry, non-corrosive gases.

Wizard Industries, Inc.    Van Nuys, CA 91411
Jan 13, 2006 ANSI-compliant Versa Specs offer 5 interchangeable lenses, including clear, yellow, gray, bifocals, and prescription lenses. Bifocal lenses are optically clear when looking straight ahead and provide correction through integrated 28 mm flat top bifocal segment when looking down. They are available in +1.0, +1.5, +2.0, +2.5, and +3.0 diopter strengths. Lenses provide 99.9% UV protection up to 380 nm, and are scratch resistant. Ear stems are adjustable for comfortable fit.

Thomas & Betts Corp.    Memphis, TN 38125
Jan 13, 2006 Single set of standard hand tool dies for all 3 Sta-Kon® power crimp tools offers interchangeability, consistent crimping, and inventory reduction. Dies are compatible with BAIR22-6 Bench-Top Air Tool, PAIR22-6 Portable Air Tool, and BAT22-6 Battery-Powered Hand Tool, all of which crimp insulated and non-insulated terminals from 22-6 AWG. Full crimp cycle is completed in under 1 sec with pneumatic tools and under 2 sec with battery-powered BAT22-6.