USG Corp.    Chicago, IL 60680-4678
Jan 19, 2006 Offering compressive strengths from 3,500-5,000 psi at 28 days, ULTRAFLOW(TM) G-1.0, 2.0, 3.0, and 4.0 are cement underlayments that come pre-sanded in bag and mix at job site. Self-drying, moisture resistant ULTRAFLOW 3.0 accepts floor coverings after 24 hr, while Portland-based ULTRAFLOW 2.0 withstands light construction traffic after 24 hr. ULTRAFLOW 4.0 self-drying cementitious wear surface acts as final floor surface or underlayment, withstanding light trade traffic within 24 hr.

Astrodyne Corp.    Mansfield, MA 02048
Jan 19, 2006 Featuring auto-switching universal input of 90-264 Vac, series of 12-130 W power adapters is offered with 1, 2, and 3 outputs in voltages from 5-48 Vdc. All models have over voltage and over current protection and exhibit efficiencies to 80% typ. Characteristics include ±2-5% line/load regulation and 1% ripple/noise. While meeting VDE/FCC Part 15/Level B EMI/RFI requirements, adapters also provide I/O isolation of 3,000 Vac and have full UL, CSA, and EEC safety certification.

Total Power International, Inc.    Lowell, MA 01850
Jan 19, 2006 With 90-132 Vac typical input voltage, TPEG06 Series External Wallmount Power Supply features 2-blade USA/Japan AC plug storage WMI type Input Connector. EMI meet CISPR-B/VCCI Class 2/FCC Class B, and noise and ripple are 1% typ, peak to peak. Fully protected against output overload and short-circuit, single-output 6 W series occupies one receptacle position and features UL 1950/PSE Class II safety approval.

Lee Industries, Inc.    Philipsburg, PA 16866
Jan 19, 2006 Able to control flow of products that tend to solidify with fluctuations in temperature, Custom Jacketed Sanitary Ball Valves maintain proper temperature of product using heating or cooling medium. Flush-bottom, 2-way, and multi-port divert valves are manufactured in sizes from 1½-4 in. Able to be fully automated, these full-flow port valves are USDA-approved, meet 3A specifications, and designed for corrosion-resistant, high-sanitary applications.

Rose Plastic USA, L.P.    California, PA 15419 0698
Jan 19, 2006 Available in various sizes and colors, Collection Containers are constructed of recyclable, lightweight PVC and can be silk-screened. Screw closure mechanism includes handle as standard. Units are suitable for product samples, office and school supplies, confectionary items, craft and hobby materials, gardening accessories, promotional items, or custom made kits.

CushionCube.com    Clinton, IA 52732
Jan 19, 2006 Made from 100% recyclable paper fibers, Cushion Cubes offer alternative to petroleum-based packaging materials. Shape can compress and reset, providing continuous product protection despite repetitive drops and jolts of shipping and handling processes. Interlocking technology produces minimal product migration and settling, locking safely around products and suspending them in carton. Cushion Cubes do not cling to items or clothing and do not emit static discharge.

FieldServer Technologies    Milpitas, CA 95035
Jan 19, 2006 SlotServer enables users to interface 3rd party devices utilizing LonWorks to ControlLogix 1756 platform. On LonWorks side, SlotSever can transfer up to 2,500 SNVTs between ControlLogix and LonWorks, connecting up to 15 LonWorks devices per unit. On ControlLogix side, users can control communications in ControlLogix software using standard generic message blocks. Module includes test display, status LEDs, LonWorks Service Pin, and trade port for troubleshooting.

Kennametal Inc., Advanced Materials Div.    Latrobe, PA 15650-0231
Jan 19, 2006 A4 groove and turn inserts, made of KYON 3500, are suited for plunge grooving as well as high-speed groove and turn applications on gray cast iron. Silicon nitride ceramic grade insert features guide rail on top and 120° v-prism on bottom that seats product securely in toolholder. Offered in rectangular and full-radiused styles, A4 double-ended insert comes in cutting widths from .125-.250 in. and is also available in carbide grades.

Kee Safety, Inc. (formerly Kee Industrial Products, Inc.)    Buffalo, NY 14206-2665
Jan 19, 2006 Kwik Kit® safety barrier system, used around areas where personnel access should be restricted due to safety concerns, complies with OSHA and BOCA standards. Requiring hex key to tighten set screws to assemble unit, product is put together by placing supplied horizontal rails through pipe fittings on pre-assembled uprights. Pipe fittings are supplied as Kee Klamp® malleable cast-iron or Kee Lite® aluminum, and 1.9 in. OD pipe is powder-coated in safety yellow finish.

Sola/Hevi-Duty, EGS Electrical Group    Rosemont, IL 60018
Jan 19, 2006 Within input voltage range of -25% to +15%, 3-phase SOLATRON Plus produces output voltage of less than ±5% of nominal voltage regulation to maintain stable, smooth power for processes and production. It incorporates shielded isolation transformers as well as encapsulated, all mode surge suppression, providing true voltage regulation, surge protection, and noise isolation. Available voltage configurations are 20, 30, 50 and 75 kVA, in combinations of 208, 480, and 600 V offerings.

ERICO    Solon, OH 44139-2631
Jan 19, 2006 For overhead decking applications, CADDY® SPEED LINK LD comes with universal toggle/wire rope assembly in 6.6, 16.4, and 32.8 ft lengths. Optional Y-toggle consists of 20 or 31 in. length of wire rope with toggle on each end. Center of wire rope is looped and crimped. Universal support system suspends static loads, even at angles, such as lighting fixtures, speakers, alarm sensors, signage, and pipes. Plastic sleeve keeps wire rope looped up until ready for installation.

PIRTEK USA    Rockledge, FL 32955
Jan 19, 2006 Pre-assembled, ¾ inch bore, 50 ft air compressor hose is rated to 250 psi and fitted with universal Chicago ends. Suitable for use with safety clips, hose works in applications that include delivery of air from compressor to hand held power tools such as jackhammers.

PIRTEK USA    Rockledge, FL 32955
Jan 19, 2006 Able to be used for petroleum- or water-based fluids and coolants, Oil Spill Response Kit contains enough absorbent socks and pads to handle up to 4½ gal of fluid. It also comes with temporary containment bag and tie. Packaged and sealed in heavy-duty plastic bag to maintain weather resistance, universal kit can be stored in any vehicle cab or under seat.

Aremco Products, Inc.    Valley Cottage, NY 10989
Jan 19, 2006 Aremcolox(TM) 502-600 is used to produce thermally insulative and high dielectric components and fixtures used in electrical and electronics applications to 1,100°F. Along with zero porosity, product exhibits compressive strength of 32,000 psi and flexural strength of 14,000 psi. Product, available in rods from ¼-1 in. dia x 18 in. long and plates from 14 x 20 x 1/8-1 in., offers 380 V/mil dielectric strength and 4.08 Btu-in/hr-ft²-°F thermal conductivity.

EAO Switch Corp.    Milford, CT 06460
Jan 19, 2006 Featuring front plate and anti-pull-off keys constructed from Zamak, S.series Keypads provide vandal resistance, making them suited for outdoor or unsupervised environments. Units are protected and sealed to IP67 and tested to 4 million operations. Available with 12 or 16 keys, and in choice of standard, telephone, or hexi-decimal II configurations, keypads can be ordered with laser engraved legends, full color front plate, and key illumination.

Airguard Industries, Inc.    Louisville, KY 40218
Jan 19, 2006 Able to snap back to original shape if damaged or deformed with no loss of structural integrity, X-Treme(TM) filters employ self-supported media that offers moisture resistance and eliminates need for expanded metal backing. Inherent media strength and stiffness result in consistent pleat shape, spacing, and height. Fully incinerable products, rated MERV 7, do not support microbial growth or contain any metal components.

Komatsu America International Company    Vernon Hills, IL 60061
Jan 19, 2006 Powered by low-emission Komatsu SAA6D107E-1 engine with multi-staged fuel injection system, PC200LC-8 and PC220LC-8 offer respective flywheel horsepower ratings of 168 and 148 hp and operating weights of 54,309-54,926 lb and 45,480-46,690 lb. Both are equipped with Komtrax wireless technology and feature multifunctional 7 in. monitor. Other features include automatic air conditioner, Equipment Management Monitoring System, and pipe-structured cab framework.

Spectronics Corp.    Westbury, NY 11590
Jan 19, 2006 Featuring flexible, 24 in. cable that maintains its position in tight areas, Spectroline® CB-1000 COBRA enables HVAC/R technicians to inspect and leak-check hard-to-see components without requiring disassembly. Clip-on inspection mirror provides capability to detect flaws normally hidden from view. Powered by 4 AA alkaline batteries, 2 service-free, integrated solid-state LEDs are used to inspect components as well as detect fluorescent leaks and surface flaws.

Spectronics Corp.    Westbury, NY 11590
Jan 19, 2006 Equipped with stay-cool pistol grip and 5½ x 8 in. lamp head, C-100P facilitates NDT inspections in limited-access areas. Its 100 W spot bulb, with average rated life of 5,000 hr, delivers steady-state UV intensity of 4,000 µW/cm² at 15 in. Powered by magnetic ballast encapsulated in high-impact plastic housing, lamp features flexible, heat-resistant filter holder that minimizes filter movement during use and prevents any visible light leakage.

Spectronics Corp.    Westbury, NY 11590
Jan 19, 2006 Equipped with 17 in. long, chrome-plated, flexible metal probe, ELD-1000 PRO-Alert utilizes heated-diode sensor technology to detect refrigerant leaks as small as 0.4 oz per year. Dual-sensitivity controls feature high-sensitivity setting for initial check of general leak area and low-sensitivity setting to home in on exact leak site. Sensitive to CFC, HCFC, and HFC refrigerants, portable product is self-calibrating to neutralize background contamination.