Lincoln Industrial    St. Louis, MO 63120 1578
Jan 27, 2006 Combining performance of vacuum brake bleeding with automatic master cylinder refill kit, Models MV6835 and MV6838 include Mityvac MV6830 Vacuum Brake Bleeder and MVA6832 Clamp-on Style Auto-refill Kit. Model MV6838 also includes MVA6834 Plate Style Auto-refill Kit, making it compatible with all vehicle makes and models and master cylinders. Using compressed shop air, venturi brake bleeder includes variable thumb throttle, swivel air inlet, and automatic shutoff.

Binks ITW Industrial Finishing    Glendale Heights, IL 60139
Jan 27, 2006 Suited for spraying aircraft components, Models AA1500 and 4000 are equipped with air cap that can be used with primers and urethane top coats. Side port control on air cap provides balance between atomizing air and fan air, optimizing atomization quality. Fan pattern adjustment enables users to spray hard-to-reach wing areas and small aircraft components. Design minimizes operator fatigue and allows for parts changeouts in less than 5 minutes.

Thermo Electron Corporation / Molecular Spectroscopy    Madison, WI 53711-4495
Jan 27, 2006 Evolution 600 UV-Vis Spectrophotometer is available with Diffuse Reflectance Accessory, which features upward viewing, horizontally mounted reflectance port, enabling delicate samples and samples of almost any size to be measured without damage. Double beam Spectralon integrating sphere ensures high energy throughput while being fully CIE compliant. Transmittance port is also included for diffuse transmittance measurements of solid or turbid liquid samples.

Linear Technology Corp.    Milpitas, CA 95035
Jan 27, 2006 Optimized for driving single white LED from 2.7-4.2 V Li-ion battery input, DC/DC Converter Model LTC3454 operates automatically in synchronous buck, synchronous boost, or buck-boost mode, depending on input voltage and LED max forward voltage. LED current is programmable to 1 of 4 levels with dual current setting resistors and dual enable pins. In shutdown, supply current is less than 1 µA. Constant operating frequency of 1 MHz allows use of small inductor.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Jan 27, 2006 Manufactured with alumina substrate, 0.240 x 0.126 x 0.025 in. Series CDHV handles voltages up to 3 kV with voltage coefficient down to 5 ppm/V. It provides resistance values of 1 megohm to 20 gigohms that are available in standard and custom resistance ratios from 10:1 to 500:1, with ratio stability of less than 0.03% at full power and 70°C at 2,000 hr. Absolute resistance tolerance options range from 20% down to 1%, with ratio tolerance options to 1%.

J. W. Winco, Inc.    New Berlin, WI 53151
Jan 27, 2006 Offered in single or double jointed versions, Metric Universal Joints are made of carbon steel, with case hardened bearing surfaces, pins, and bearing sleeves. Units with friction bearings come in bore sizes of 6-32 mm and allow for speeds up to 1,000 rpm, while joints with needle bearings range in size from 10-32 mm and are suited for applications up to 4,000 rpm. Allowable rpm is dependent on load, duration, angular deposition, and lubrication.

Linear Technology Corp.    Milpitas, CA 95035
Jan 27, 2006 Featuring intelligent digital power management, LTC2970 acts as dual I2C power supply monitor and margining controller. It provides digital control of analog power supplies in high-availability systems via its I2C digital interface, 14-bit ADC, and reference and current output DACs. Voltage-buffered, 8-bit DACs drive supplies' feedback nodes or can be programmed by linear voltage servo to trim and margin output voltages. Product also incorporates on-chip temperature sensor.

Michigan Pneumatic Tool, Inc.    Detroit, MI 48204-1184
Jan 27, 2006 Suited for heavy-duty industrial applications, MP-2511 utilizes 1.50 hp air motor that enables no-load operating speed of 12,000 rpm. High-speed, lightweight cone wheel grinder also features built-in lubricator and automatic governor. Sturdy design provides effective metal removal capabilities, and unit is suited for cleaning castings, removing fins, and grinding welds.

Kason Corporation    Millburn, NJ 07041
Jan 27, 2006 Dust-tight Batch Sifter, constructed with stainless steel housing, motor, and stand, is offered in 18, 24, and 30 in. dia and can be equipped with single or twin imbalanced-weight gyratory motors. With gap-free flange arrangement, unit scalps oversize particles down to 38 microns from dry bulk powders or solids-laden slurries and may be disassembled without tools for sanitizing. Wire mesh screening material is offered in 304, 316, and magnetic 400-series stainless steel.

Samtec, Inc.    New Albany, IN 47151 1147
Jan 27, 2006 Ganged RF cable plugs are available for terminating 2, 4, 6, or 8 wires simultaneously with choice of standard 26 AWG coax cable or high performance 26 AWG coax cable with 1.4 dielectric constant. Standard assemblies can be specified with wire lengths from 6 in. to 1 m. Ganged RF board-to-board jacks and plugs are available for terminating 2, 4, 6, or 8 connectors simultaneously. Standard board spacing is 4.5 mm. Captive screw receptacles are available on jacks.

AXIOMTEK    Taipei   Taiwan
Jan 27, 2006 Available with defined 4.53 x 6.50 in. form factor, Series EP810 low power EPIC SBCs utilize Intel® 852GM with ICH4 chipset and support Socket 479 for Pentium® M and Celeron® M processors with 400 MHz FSB. Features include PC-style I/O connectors, dual LVDS LCD display function, dual 10/100/1,000 Mbps LAN ports, CompactFlash(TM), 4 USB 2.0 ports, and AC97 codec audio. Boards are optimized for dual display transaction terminal applications.

XRamp Security Services, Inc.    San Antonio, TX 78255
Jan 27, 2006 SecureTrust® PCI Compliance Solutions aid organizations who accept credit cards and seek to attain mandatory PCI compliance. Services include tests that scan for nearly 10,000 vulnerabilities, such as port scan, trojans, CGI abuses, buffer overflow vulnerabilities, router and firewall weaknesses, denial of service attacks, and HTTP and FTP vulnerabilities. DSS certification protects merchants from fines and penalties, which can be imposed upon non-compliant vendors.

Zebra Technologies    Vernon Hills, IL 60061 3109
Jan 27, 2006 Built with metal enclosure and die-cast frame, Model S4M supports direct thermal printing at 6 ips with print width of 4.09 in. and label width of 4.50 in. It is equipped with 2-line LCD control panel, 4 MB Flash memory, and 203 dpi printhead. Connection options include 10/100 Ethernet, USB, 802.11 wireless, parallel, and RS-232 serial. Printer supports linear and 2-dimensional bar code symbologies including Code 39, Code 128, UPC/EAN plus extensions, RSS, Data Matrix, and PDF417.

Quanticus S.A. de C.V    Queretaro, Qro   Mexico
Jan 27, 2006 Based on Windows OS, DBxtra 2005 enables users to connect to multiple databases or data sources simultaneously and, using query and filtering mechanisms, explore and retrieve data to answer business questions. Program offers direct SQL editing through visual query designer, ability to insert multiple charts into reports, grouping ability in web reports with ASP, and digital chard dashboards. Web reports can be published to intranet or web server as well as printed or exported.

AnSem NV    Heverlee   Belgium
Jan 27, 2006 Capable of throughput rates from 2.5-3.125 Gbps, SerDes PHY is custom-designed, multi-standard (SONET, XAUI, and Rapid I/O), analog IC designed for use in Kawasaki Microelectronics' advanced communication ASICs. It can be monolithically integrated with digital designs and is built on 90 nm TSMC technology.

DP Technology Corp.    Camarillo, CA 93012
Jan 27, 2006 On 3 CDs, AVI-based tutorial provides ESPRIT users with over 4 hr of instruction on ESPRIT 2006 SolidMill production. It includes chapters and hands-on exercises that use every operation on ESPRIT 2006 Production Milling toolbar. Instruction covers Wrap Pocketing and Contouring, both as features created on a solid model or from unwrapped 2D geometry. Tutorial also provides insight into Rotary Face Pocketing, Rotary Face Contouring, and ID Wrap Operations.

Hydraulic Institute    Parsippany, NJ 07054
Jan 27, 2006 ANSI/HI Pump Standards on CD-ROM v2.0 contains full text of all ANSI/HI Standards in single-user CD-ROM format. Suited for those involved with pumps or pumping systems, product delivers 1,500+ pages of content for 26 standards in Adobe® Acrobat® format, allowing use of bookmarks, annotations, printing, and multiple page views. Hyperlinks in Index or Table of Contents, provided for individual standards, let user skip to desired page.

XSENSOR Technology Corporation    Calgary T2P 0C5  Canada
Jan 27, 2006 Without requiring laptop, X3 Technology Series supports handheld devices with plug-and-play functionality and offers wireless capabilities. Startup time is typically under 20 sec, and software uses 65,000 color spectrum to create pressure images. Proprietary sensor pads, suited for medical, industrial, and point-of-sale applications, are flexible, conforming, durable, and thin.

ESI Group    Bloomfield Hills, MI 48304
Jan 27, 2006 Featuring 64-bit version of Open Virtual Try-Out Space (VTOS) Visual Environment, PAM-CRASH Solver simulates crashes for engineers utilizing Microsoft Windows Compute Cluster Server (CCS) 2003. It is ported to Windows Server 2003 x64 Edition and integrates with Microsoft Message Passing Interface and Job Scheduler technologies, allowing engineers to work with virtual models consisting of more than 4.5 million elements that require over 3-4 GB of memory.

Sterling Truck Corporation    Redford Township, MI 48239
Jan 27, 2006 Offered in Classes 3, 4, and 5, low cab-over-engine truck is powered by 4.9 L diesel engine and features 6-speed automatic transmission. It is available with up to 5 wheelbases to accommodate 12-20 ft bodies and comes in choice of 5 colors. Offered as standard with air conditioning, truck suits applications such as wholesale and retail services, pickup and delivery, landscaping, and construction.