ASG, Div. of Jergens, Inc.    Cleveland, OH 44110
Mar 07, 2006 Mounted on current-controlled driver between driver and bit, transducer is used with Smart Torq(TM) Controller to provide operator-viewable torque readouts for controller as well as data output. Controller provides error-proof fastener assembly by controlling and monitoring dc brushless electric screwdriver. Along with torque control, Smart Torq II offers fully adjustable go-no-go limits for cycle time, joint rate, cycle start current, and cycle complete current.

ConProTec Inc.    Salem, NH 03079 2060
Mar 07, 2006 Consisting of manual dispensing gun, S-50 System cartridge, and static mixer, MIXPAC Hand-Held Cartridge Dispensing System dispenses 2-component adhesives in 10:1 volumetric ratio. Available in either polypropylene or polyester, each cartridge offers total capacity of 50 ml and ensures precise ratio control, minimizing material waste.

Bosch Rexroth Corp., Pneumatics Div.    Lexington, KY 40511
Mar 07, 2006 Plug-in Model CD26-PL features 26 mm wide manifold with flows up to 1.01 C_v. In accordance with ISO standard 15407-2, simultaneous pneumatic and electrical connection is done on base plate. Manifold threaded ports are available in NPT and ISO-G. Valve offers single and double solenoid operation as well as double 3/2, allowing 2 functions from same valve position. Offered in multi-pin version with D-sub connector, valve can be combined with BDC, VDS, and DDL bus systems.

Advance Div. of Philips Electronics North America    Rosemont, IL 60018
Mar 07, 2006 Measuring 4.4 x 1.3 x 1.2 in., e-Vision® Mini 39 W Ballast operates on line voltage of 120 V, 50/60 Hz with 90°C max case temperature rating and cold-start capability down to -20°F. Ballast incorporates range of safety features, including lamp end-of-life detection and thermal protection. It is suited for downlighting, track lighting, and accent lighting applications.

Stat-Ease, Inc.    Minneapolis, MN 55413
Mar 07, 2006 Suited for engineers, researchers, quality professionals, and Six Sigma practitioners, Design-Expert v7.0 enables users to identify ideal process settings and find optimal product formulations. Minimum-run 2-level factorial designs let users screen for main effects with least number of experimental runs. Response Surface Methods graphics offer graduated or banded contour and 3D surface plots, while crosshairs window allows responses to be predicted at any place on response surface plot.

McMillan Co.    Georgetown, TX 78627 1340
Mar 07, 2006 Featuring patented thermal mass flow sensor design, Series 209 Mass FLO-SENSORS minimize zero drift while maintaining linear outputs. Aluminum units include NPT ports and analog output for remote data monitoring. They are suitable for variety of industrial, commercial, laboratory, and OEM applications, including furnace flow control, online gas blending, regulation of sample gas streams, and precise gas injection systems.

Power-Sonic    San Diego, CA 92154
Mar 07, 2006 Maintenance-free, sealed lead acid battery, Model PS-62000 is designed specifically for pallet jacks and walkie stacker applications. Measuring 12.05 x 6.61 x 8.74 in., 6 V unit weighs 64 lb and has nominal capacity of 200 Ah at 10 hour rate. Height over terminals is 9.98 in.

Mitsubishi Forklift Trucks    Houston, TX 77043
Mar 07, 2006 Designed to withstand challenging environments, FBC15N-FBC30LN N-Generation AC-powered lift trucks are engineered with PM-1000 AC control system featuring MOSFET and thermal technology, both of which offer Integrated Presence System. Travel speed, lift speed, acceleration rate, and regenerative and auto regenerative braking are adjusted to match performance requirements. Trucks feature interchangeable components, diagnostic software, and 500-hr service intervals.

Milacron Inc.    Cincinnati, OH 45206
Mar 07, 2006 Designed for heavy-duty machinery and grinding on both ferrous and non-ferrous metals, CIMPERIAL® Z Fluids offer corrosion protection, lubricity, low foaming characteristics, and rancidity control. They contain extreme pressure additives, which optimize machining and grinding in difficult applications.

STMicroelectronics    Lexington, MA 02421
Mar 06, 2006 Two-Camera Image Subsystem is based on STV0984 image system controller that supports 2 SMIA-compliant sensors with active array of up to 2 M pixels, each capable of running at up to 25 frames/sec. STV0984 controller embeds dual imaging signal processing pipeline, with color interpolation, scaling, formatting, and JPEG compression. Dual pipeline also supports full-frame rate camcorder mode with local viewfinder support and video capture.

Lee Industries, Inc.    Philipsburg, PA 16866
Mar 06, 2006 Tri-Mix Turbo-Shear provides counter-rotating, scrape-surface agitator that can be designed to handle products up to 2,000,000 cps. Turbo-Shear head accepts several dispenser designs for 10,000 cps products alone and up to 50,000 cps products with aid of counter-rotating agitator.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Mar 06, 2006 Available in 8-pin, 3.1 x 3.1 x 1.18 mm MSOP, 22-bit MCP3550 comes in models that reject noise greater than 120 dB in 50 and 60 Hz line frequencies and offer respective 12.5 and 15 samples/sec sample rates. Integral nonlinearity is ±2 ppm typ, and output noise is 2.5 µVrms min. Along with low-current operation of 120 µA typ and power consumption of 0.6 mW max @ 5 V, both versions offer auto calibration and operate over temperature range of -40 to +125°C.

Metabo Corp.    West Chester, PA 19380 4243
Mar 06, 2006 Combination kit comes with 2 tools, AC30 charger, and two 18 V 2.0 Ah Ni-Cad batteries. First tool, BSZ 18 Cordless Drill/Driver, delivers 549 lb-in. torque, has 20 torque settings, and incorporates Variospeed electronics for infinite no-load speeds to 1,450 rpm. Also included, KSAP 18 Cordless 6½ in. Circular Saw cuts off and rips lumber up to 2 1/8 in. Ergonomic unit has 2,500 rpm no-load speed, spindle stop system, and locking bevel plate for cuts up to 47°.

Jergens, Inc.    Cleveland, OH 44110
Mar 06, 2006 Made of mild steel, case-hardened to 60 HRc, USAE(TM) Washers combine large outside diameter of USS standard washers with precise inside diameter of SAE washers. Units are available in range of sizes to accommodate bolt sizes from ¼-1 in. Tolerances for all dimensions are ±.010 in. Washers have black oxide finish with bolt size stamped on each one for identification.

Geisler, J. L. Corp.    Warren, MI 48092
Mar 06, 2006 Complete Roll-On Stencil Kit includes 3 in. roller, 4½ x 7 ½ in. ink pad, quart of stencil ink, and custom-made, reusable stencil in choice of .010 mylar or .040 polyvinyl. Stencils allow small quantity markings for any size package and are also suited for marking doors, loading areas, bays, and buildings. They can be made with company logos, universal symbols, and special warnings.

Cattron-Theimeg, Inc.    Sharpsville, PA 16150 1198
Mar 06, 2006 Belly Box-style T34C controller/transmitter features 5052 aircraft-quality aluminum housing with guard bar that protects switches against physical damage. Able to be customized with pushbuttons and toggle switches, controller may be configured with up to 6 control levers. Handle for each lever offers different geometric shape to facilitate identification without having to look down. Product suits indoor and outdoor overhead crane applications.

Pittman Corp    Harleysville PA 19438
Mar 06, 2006 Measuring 1.3 in. dia, ELCOM ST® Series 1300 includes 1.5, 2, and 2.5 in. long models that achieve 12.6-54.3 oz-in. peak torque and 5-9 oz-in. continuous torque. Rotor construction enables rotational speeds to 8,000 rpm, and 3 Hall sensors provide rotor position feedback. Housed in aluminum, series features 3-phase stator with 6-slot silicon steel laminations; 4-pole rotor with neodymium ring magnets; and ABEC ball bearings with dynamic load ratings up to 390 lb.

Micro Plastics, Inc.    Flippin, AR 72634
Mar 06, 2006 Featuring 3/8-16 in. thread, Toilet Seat Nuts and Bolts are molded in corrosion resistant plastic to prevent damage from cleaning substances. Crown on nut centers bolt and nut in bowl seat attachment hole, minimizing possibility of nut becoming loose. Wing design enables nut to be tightened by hand. Nut is molded in natural color and bolt is molded in black.

Device Technologies, Inc.    Southborough, MA 01772-1033
Mar 06, 2006 Push-Mount(TM) Cable Tie assembly features low profile that prevents snagging when cable is trimmed and harness is pulled through bulkhead. Remaining terminal end falls below low profile receptacle, eliminating sharp edges. Push-Mount Wire Tie has 50 lb tensile strength rating and operates in temperatures from -40 to 185°F. RoHS-compliant product snaps into panel sheet with max thickness of .135 in., providing clean, multi-tasking management solution.

Optra Inc.    Topsfield, MA 01983
Mar 06, 2006 Suited for use with NanoGrid® system, contamination-resistant grid encoder allows for operation of position measurement systems in less than clean room environments. All grid elements are electrically connected, enabling entire grid surface to be set at fixed electrical potential to eliminate static electricity as well as inhibit particle accumulation. Product offers 3 user-selectable standard data interfaces for motion controller compatibility.