Comdel, Inc.    Gloucester, MA 01930
Mar 20, 2006 Suited for large surface handling, Model ESC-HV features short circuit and open circuit proof design, low stored energy, and built-in current limiting to safeguard processes from surges and arcs. Fixed bipolar supply provides output stability of 1% or better of output from 5% to full load. Housed in 3.5 x 9.5 x 12.5 in. chassis, unit can be located anywhere and in any orientation. There are no special requirements needed for cooling and shielding.

Cotronics Corp.    Brooklyn, NY 11232
Mar 17, 2006 Packaged in dispensing cartridges, 450°F Instant Metal 7056AL forms solid metallic aluminum layer that adheres to smooth, rough, or porous surfaces as well as most plastics, metals, ceramics, glass, and wood. It cures in 4-8 min at room temperature without objectionable sulfur odors. Once cured, metallic composite is machinable with standard tools and can also be tapped, drilled, and threaded.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Mar 17, 2006 Available in green, red, yellow, blue, and white, LED Pilot Lights feature plastic housing and operate on 24 Vac/dc, 110 Vac, or 230 Vac. They include locking nut for securing to panel and gasket to insure NEMA 4/4X and IP65 rating.

J. W. Winco, Inc.    New Berlin, WI 53151
Mar 17, 2006 Aluminum Threaded Tube Inserts serve as end plugs in tubing, enabling them to be fitted with threaded leveling feet. Inserts are fitted with mallet and are designed to bridge internal diameter tolerance of ± 0.5 mm on both round and square tubing.

Owens Design, Inc.    Fremont, CA 94538
Mar 17, 2006 Designed for 300 and 200 mm wafers, Wafer Flip Module is compatible with edge grip and vacuum paddle end effectors. It has 2 motors, one for flipping and one for wafer gripper mechanism. Rotation of 180° can be done in less than 2 sec, with clamp speed at less than 1 sec. Flipper is designed so that no particles are detected in wafer path during airborne dynamic motion tests. All motors and motion mechanisms are contained in purged enclosure to eliminate particle generation.

United Grinding Technologies, Inc.    Miamisburg, OH 45342
Mar 17, 2006 Kronos L dual features 2-in-1 setup where workpiece is first ground between centers at material removal rate of 0.05-0.10 mm/min on dia. Workpiece is then released, and finish grinding takes place via centerless grinding between control wheel and workrest blade. Double-end supported grinding wheel spindle permits surface speeds up to 120 m/sec, and double-end supported regulating wheel spindle delivers up to 700 rpm. Granitan machine base provides vibration dampening and thermal stability.

3M    St. Paul, MN 55144
Mar 17, 2006 Featuring sturdy construction with traction-grip surface on belts, 3M-Matic(TM) Adjustable Case Sealer 110a handles case weights from 5-65 lb and sizes ranging from 3.5 in. high x 6 in. wide to 22.5 in. high x 22.5 in. wide. Product accepts Scotch® Box Sealing Tapes in 36-72 mm widths and incorporates AccuGlide(TM) Taping Head 2+ with curvilinear motion. Case sealer suits applications when back-up is needed for small runs, overruns, or seasonal surges.

RotoZip by Bosch    Mount Prospect, IL 60056
Mar 17, 2006 Offering alternative to metal snips, shears, power shears, and nibblers, XBITS(TM) Spiral Saw® XB-MC1 provides RotoZip users with 5/32 in. diameter metal cutting bit for contractor-rated applications. Drill point tip enables users to plunge directly into material for complex cut-outs. Bit is suited for cutting duct work, auto body panels, gutters, aluminum siding, sheet metal, or studs up to 18 gauge thickness.

Thermo Electron Corporation / Molecular Spectroscopy    Madison, WI 53711-4495
Mar 17, 2006 Featuring common platform, Antaris II, MX, and EX are suited for method development, raw materials analysis, batch reaction monitoring, on- and off-line moisture analysis, real-time blend uniformity analysis, and tablet analysis. All offer choice of software packages, including RESULT(TM), featuring corrections for transferring data across sampling techniques and fiber optics; OMNIC(TM) with spectroscopic analysis tools; and Unscrambler® from CAMO for chemometric modeling and method development.

Sakor Technologies, Inc.    Okemos, MI 48864-3547
Mar 17, 2006 Compatible with engine, powertrain, hybrid vehicle, and electric motor testing applications, Accudyne(TM) AC Motoring Dynamometers are available in sizes from fractional to 2,000+ hp with speeds over 30,000 rpm. Vector drive technology enables true 4-quadrant capability, with completely seamless crossover between motoring and loading modes. In addition to NVH testing, products offer features such as target device inertia and engine simulation.

NYLOK Corp.    Macomb, MI 48042 4007
Mar 17, 2006 Turquoise-colored PRECOTE 85(TM) provides locking characteristics suited for cylinder head, power train, and other high-stressed threaded bolts with controlled friction. Resistant to temperatures from -58 to 300ºF, duo-microencapsulated thread adhesive achieves max strength within 24 hr at room temperature and will not prematurely harden due to chemical reactions of moisture and/or solvent penetration. Use of product eliminates need for additional locking devices.

Oil Skimmers, Inc.    Cleveland, OH 44133
Mar 17, 2006 Suited for tanks and sumps, Model 6V Vapor Hood is used in conjunction with Model 6V oil skimmer, and is fully enclosed with gasket to prevent VOCs from escaping into atmosphere during oil skimming process. Electric motor is protected from skimming area and VOCs, while built-in decanter provides water-free oil skimming. Although enclosed, hood enables users to access skimmer for inspection and maintenance.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Mar 17, 2006 Charge pump DC/DC Converter Models MCP1256/7/8/9 automatically switch between 1.5x and 2x boost operation. All have low-noise ripple of less than 20 mVpp at load currents up to 100 mA. Extended temperature operation of -40 to +125°C and thermally capable DFN packaging make devices suited for wide variety of environments and applications, including battery-powered consumer electronics devices that require low power and utilize LED backlights for LCDs.

Automatic Feed Co.    Napoleon, OH 43545
Mar 17, 2006 REIKA Compact Cut-Off Machines cut and simultaneously face and chamfer OD/ID on both tube ends. Tube is held in fixed position, while cutting head rotates, minimizing positioning error and eliminating marking on OD surface. Machines offer production rates of 1,900 part/hr with tolerance rates of ±0.05 mm. Equipped with Siemens or Allen Bradley Controls, machines handle tubes up to 65 ft long and up to 3.5 in. dia with minimum cut length less than 1.0 in.

Phoenix Contact    Harrisburg, PA 17111 0100
Mar 17, 2006 Meauring 12 mm per channel, DIN-rail-mountable VALVETRAB Compact offers 40 kA surge current handling capacity and features symmetrical plugs and bases for installation flexibility. Local and remote indication provides diagnostics for status of protection plugs. Offered in different versions to address 1-, 2-, or 3-phase power systems, VALVETRAB Compact meets technical, installation, and certification standards for worldwide acceptance.

Trust Automation, Inc.    San Luis Obispo, CA 93401
Mar 17, 2006 Measuring 14.9 x 7.7 x 4.7 in., 3-phase Model TA330 is configured for 3-phase dc brushless servo motors using Hall Effect sensors, 3-phase ac brushless motors using external sinusoidal commutation, single-phase dc brushed servo motors in bridged mode, and brushless linear motors. Requiring 24 V input to power logic and bias supplies, unit produces very low electrical noise, making it suited for integration in or near systems with noise-sensitive circuitry.

J.W. Miller Magnetics    Gardena, CA 90247-2859
Mar 17, 2006 RoHS-compliant Series SS, SD, DD, and UD Power Transformers are manufactured with split bobbin, non-concentric wound construction, which provides high voltage isolation and minimizes electrostatic coupling. Units are available with single input/dual output or dual input/dual output, either in series or parallel connections. Depending on model, power ranges are from 1.1-56 Va with 50/60 Hz frequency and dielectric strength from 2,000-3,750 Vrms.

Omega Engineering, Inc.    Stamford, CT 06907
Mar 17, 2006 Factory-calibrated for direct-acting operation, Series IP211/EP211 decreases supply pressure, converting it to regulated output pressure in direct proportion to electrical input signal. Units accept supply pressures from 3 psig above max output to 100 psig. Integral pneumatic volume booster provides flow capacity up to 12 scfm. Series incorporates general purpose, FM intrinsically safe, and CSA intrinsically safe models, all of which mount at any angle.

Harris Corp.    Rochester, NY 14610
Mar 17, 2006 Falcon Watch(TM) Remote Intrusion Detection and Surveillance system includes RF 5405 Intelligent Gateway communications node that receives alarms from multiple sensors and relays data to command centers. System employs seismic detectors to detect ground vibration caused by vehicles or pedestrians; magnetic detectors to detect the movement of metal objects such as weapons or vehicles; and passive infrared sensors to detect the movement of thermal signatures such as vehicles or pedestrians.

Avaya, Inc.    Basking Ridge, NJ 07920
Mar 17, 2006 VPNremote for Avaya 4600 IP Telephones embeds VPNremote(TM) software into IP telephones to extend communications to employees working from home, temporary work site, or emergency location. Employees can install desktop IP phone in remote office with minimal equipment or IT assistance. Features include speakerphone, short extension dialing, transfer, conferencing, and web-based access to information and corporate-wide broadcasts via screen display.