McMillan Co.    Georgetown, TX 78627 1340
Mar 07, 2006 Featuring patented thermal mass flow sensor design, Series 209 Mass FLO-SENSORS minimize zero drift while maintaining linear outputs. Aluminum units include NPT ports and analog output for remote data monitoring. They are suitable for variety of industrial, commercial, laboratory, and OEM applications, including furnace flow control, online gas blending, regulation of sample gas streams, and precise gas injection systems.

Power-Sonic    San Diego, CA 92154
Mar 07, 2006 Maintenance-free, sealed lead acid battery, Model PS-62000 is designed specifically for pallet jacks and walkie stacker applications. Measuring 12.05 x 6.61 x 8.74 in., 6 V unit weighs 64 lb and has nominal capacity of 200 Ah at 10 hour rate. Height over terminals is 9.98 in.

Mitsubishi Forklift Trucks    Houston, TX 77043
Mar 07, 2006 Designed to withstand challenging environments, FBC15N-FBC30LN N-Generation AC-powered lift trucks are engineered with PM-1000 AC control system featuring MOSFET and thermal technology, both of which offer Integrated Presence System. Travel speed, lift speed, acceleration rate, and regenerative and auto regenerative braking are adjusted to match performance requirements. Trucks feature interchangeable components, diagnostic software, and 500-hr service intervals.

Milacron Inc.    Cincinnati, OH 45206
Mar 07, 2006 Designed for heavy-duty machinery and grinding on both ferrous and non-ferrous metals, CIMPERIAL® Z Fluids offer corrosion protection, lubricity, low foaming characteristics, and rancidity control. They contain extreme pressure additives, which optimize machining and grinding in difficult applications.

STMicroelectronics    Lexington, MA 02421
Mar 06, 2006 Two-Camera Image Subsystem is based on STV0984 image system controller that supports 2 SMIA-compliant sensors with active array of up to 2 M pixels, each capable of running at up to 25 frames/sec. STV0984 controller embeds dual imaging signal processing pipeline, with color interpolation, scaling, formatting, and JPEG compression. Dual pipeline also supports full-frame rate camcorder mode with local viewfinder support and video capture.

Lee Industries, Inc.    Philipsburg, PA 16866
Mar 06, 2006 Tri-Mix Turbo-Shear provides counter-rotating, scrape-surface agitator that can be designed to handle products up to 2,000,000 cps. Turbo-Shear head accepts several dispenser designs for 10,000 cps products alone and up to 50,000 cps products with aid of counter-rotating agitator.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Mar 06, 2006 Available in 8-pin, 3.1 x 3.1 x 1.18 mm MSOP, 22-bit MCP3550 comes in models that reject noise greater than 120 dB in 50 and 60 Hz line frequencies and offer respective 12.5 and 15 samples/sec sample rates. Integral nonlinearity is ±2 ppm typ, and output noise is 2.5 µVrms min. Along with low-current operation of 120 µA typ and power consumption of 0.6 mW max @ 5 V, both versions offer auto calibration and operate over temperature range of -40 to +125°C.

Metabo Corp.    West Chester, PA 19380 4243
Mar 06, 2006 Combination kit comes with 2 tools, AC30 charger, and two 18 V 2.0 Ah Ni-Cad batteries. First tool, BSZ 18 Cordless Drill/Driver, delivers 549 lb-in. torque, has 20 torque settings, and incorporates Variospeed electronics for infinite no-load speeds to 1,450 rpm. Also included, KSAP 18 Cordless 6½ in. Circular Saw cuts off and rips lumber up to 2 1/8 in. Ergonomic unit has 2,500 rpm no-load speed, spindle stop system, and locking bevel plate for cuts up to 47°.

Jergens, Inc.    Cleveland, OH 44110
Mar 06, 2006 Made of mild steel, case-hardened to 60 HRc, USAE(TM) Washers combine large outside diameter of USS standard washers with precise inside diameter of SAE washers. Units are available in range of sizes to accommodate bolt sizes from ¼-1 in. Tolerances for all dimensions are ±.010 in. Washers have black oxide finish with bolt size stamped on each one for identification.

Geisler, J. L. Corp.    Warren, MI 48092
Mar 06, 2006 Complete Roll-On Stencil Kit includes 3 in. roller, 4½ x 7 ½ in. ink pad, quart of stencil ink, and custom-made, reusable stencil in choice of .010 mylar or .040 polyvinyl. Stencils allow small quantity markings for any size package and are also suited for marking doors, loading areas, bays, and buildings. They can be made with company logos, universal symbols, and special warnings.

Cattron-Theimeg, Inc.    Sharpsville, PA 16150 1198
Mar 06, 2006 Belly Box-style T34C controller/transmitter features 5052 aircraft-quality aluminum housing with guard bar that protects switches against physical damage. Able to be customized with pushbuttons and toggle switches, controller may be configured with up to 6 control levers. Handle for each lever offers different geometric shape to facilitate identification without having to look down. Product suits indoor and outdoor overhead crane applications.

Pittman Corp    Harleysville PA 19438
Mar 06, 2006 Measuring 1.3 in. dia, ELCOM ST® Series 1300 includes 1.5, 2, and 2.5 in. long models that achieve 12.6-54.3 oz-in. peak torque and 5-9 oz-in. continuous torque. Rotor construction enables rotational speeds to 8,000 rpm, and 3 Hall sensors provide rotor position feedback. Housed in aluminum, series features 3-phase stator with 6-slot silicon steel laminations; 4-pole rotor with neodymium ring magnets; and ABEC ball bearings with dynamic load ratings up to 390 lb.

Micro Plastics, Inc.    Flippin, AR 72634
Mar 06, 2006 Featuring 3/8-16 in. thread, Toilet Seat Nuts and Bolts are molded in corrosion resistant plastic to prevent damage from cleaning substances. Crown on nut centers bolt and nut in bowl seat attachment hole, minimizing possibility of nut becoming loose. Wing design enables nut to be tightened by hand. Nut is molded in natural color and bolt is molded in black.

Device Technologies, Inc.    Southborough, MA 01772-1033
Mar 06, 2006 Push-Mount(TM) Cable Tie assembly features low profile that prevents snagging when cable is trimmed and harness is pulled through bulkhead. Remaining terminal end falls below low profile receptacle, eliminating sharp edges. Push-Mount Wire Tie has 50 lb tensile strength rating and operates in temperatures from -40 to 185°F. RoHS-compliant product snaps into panel sheet with max thickness of .135 in., providing clean, multi-tasking management solution.

Optra Inc.    Topsfield, MA 01983
Mar 06, 2006 Suited for use with NanoGrid® system, contamination-resistant grid encoder allows for operation of position measurement systems in less than clean room environments. All grid elements are electrically connected, enabling entire grid surface to be set at fixed electrical potential to eliminate static electricity as well as inhibit particle accumulation. Product offers 3 user-selectable standard data interfaces for motion controller compatibility.

Hoyt Electrical Instrument Works, Inc.    Penacook, NH 03303 8798
Mar 06, 2006 Available in 0-200 A capacity, HW-HLD-06 single-phase electromechanical round KW meter measures active energy in single-phase, 2- or 3-wire alternating current power grids. Socket type meter has built-in CT and meets ANSI C 12.1 standards. Offered with various amp and voltage inputs, LCD Rectangular KW hour meters prevent illegal pilfering of electricity with Class 1 accuracy. Provided with pulse output, remote control detecting of consumption locale is available.

Toshiba Teli America, Inc.    Irvine, CA 92618
Mar 06, 2006 Measuring 54 x 43 x 59 mm, CS6910CL employs Fuji® honeycomb-style ¼ in. CCD sensor and uses universal C-mount lenses. Progressive-scan sensor acquires SXGA or VGA images in 24-bit color, even in random trigger shutter. Camera Link(TM) interface allows unit to digitally output images in RGB or YUV mode. Along with external trigger, 50 dB SNR, and electronic shutter, features include one push white balance and min sensitivity of 30 lx @ F1.4.

BEA Lasers    Elk Grove Village, IL 60007
Mar 06, 2006 Fixed focus CW diode pumped laser diode modules 2501 and 2503 feature respective beam divergence values of less than 1.2 and .8 mrad. Both require 3 Vdc with operating current around 300 mA. Model 2501 features 11 mm dia x 37.39 mm long laser housing designed with threads to facilitate add-on of additional optics. Laser housing for model 2503 measures 12 mm dia x 47.4 mm. Applications include spectroscopy, positioning, flow visualization, and holography.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Mar 06, 2006 TS16949 certified Models TAS5414 and TAS5424 4-channel Class D amplifiers deliver 90 percent power efficiency at normal radio listening levels, and overcome EMI through digital PWM topology, gate drive technology, and AM interference avoidance. Two TAS54x4 amplifiers can provide 8 channels of audio. Surface mount devices need only a thin heat sink to spread heat, and on-chip diagnostics simplify radio installation by testing speaker connections created on assembly line.

Sokymat SA    Granges   Switzerland
Mar 06, 2006 Measuring 16 mm dia and 2.6 mm thick, 13.56 MHz RFID Tag guarantees accurate traceability and quick inventory checks of jewelry, from manufacturers to retailers. When tag is attached to item, it cannot be removed without deactivating it, making it impossible to remove tag and place it on different item without leaving electronic or physical evidence of tampering.