Morgan Technical Ceramics    Fairfield, NJ 07004
Mar 27, 2006 Designed to produce wear-resistant coatings, system offers 3 fundamental deposition techniques: RF Plasma with rotating stage, magnetron for sputtering metals and oxides, and ion beam for direct deposition of DLC and SiO₂. It is available in batch and automated load-lock options and features etching capabilities. Able to produce protective, ultrasmooth DLC coatings, system is suited for use in manufacturing, R and D, and developmental engineering.

CIT Relay & Switch: Division of Circuit Interruption Technology, Inc.    Maple Grove, MN 55369
Mar 27, 2006 Available in 7.2 x 7.2 mm package, STJ Series sealed tactile switch offers off center actuation of ±30°. RoHS compliant STJ, right-angle STJV, and surface mount STJS Series offer choice of silver or gold plated contacts over nickel-plated stainless steel, and terminal materials are either silver or gold over nickel-plated brass. Electrical ratings provide max power of 1 W with silver and 0.4 W with gold. Voltage is 50 Vdc max and 20 mV min with current 50 mA max and 1 mA min.

Advantech Co.Ltd.      Taiwan
Mar 27, 2006 Along with multiple I/O capabilities, AIMB-560 accepts Intel Pentium 4 and Celeron D processors with processing speeds to 3.8/3.06 GHz. It delivers LAN performance with dual Gigabit Ethernet interfaces, which offer up to 2 Gbps throughput. Built on LGA775 architecture, board utilizes Intel 915GV chipset, 800 MHz FSB, and dual-channel DDRII 400/533 SDRAM up to 2 GB. Integrated VGA controller shares system memory up to 128 MB, and board offers up to 2 MB L2 cache.

Artesyn Technologies    Framingham, MA 01701
Mar 27, 2006 Intended for computer, storage, and networking applications, RoHS-compliant LDO-C and SIL-C2 models are available with choice of vertical or horizontal through-hole mounting and horizontal surface mounting. LDO-C models offer choice of 3, 6, and 10 A outputs, while SIL-C2 models offer 20 or 40 A outputs. Protected against short-circuit and overvoltage conditions, converters use fixed frequency switching topology and open-frame, single-board construction.

Sealant Equipment & Engineering, Inc.    Plymouth, MI 48170-0965
Mar 27, 2006 Model 2200-545-037 uses No-Drip® technology for dispensing miniature beads and small volumes of solvent-based, moisture-curing, and stringy materials such as epoxies, silicones, and polyurethanes. Pneumatically actuated, it is constructed with stainless-steel wetted components, dual carbide ball-and-seat shut-off, safety-closure spring, flow-control adjustment, and balancer eye-hook. Quarter-turn bayonet mount accommodates various disposable mixer sizes.

Jergens, Inc.    Cleveland, OH 44110
Mar 27, 2006 Constructed with 17-4 PH stainless steel forged lifting ring, stainless steel Kwik-Lok(TM) Lifting Pins combine positive-locking pin, push button release design with 5:1 strength factor. Products accommodate range of lifting hooks or hardware, and load spreader bar on each ring helps prevent accidental actuation. Inch sizes offer pin diameters from ¼-5/8 in., grip lengths from 0.5-3.00 in., and max lifting loads from 400-1,400 lb. Metric sizes are also available.

ASG, Div. of Jergens, Inc.    Cleveland, OH 44110
Mar 27, 2006 Heavy-duty torque arms help improve production efficiencies and product quality by limiting operator's influence on assembly process. While securely maintaining tool location to allow for smooth assembly tool movement, products also help absorb torque to reduce potential for operator arm, wrist, or hand injury. These 3 torque arms have max torque reaction of 100 lbf in and max tool weight of 10 lb. Max arc varies from 18-24 in. to 30 in.

Ormec Systems Corp.    Rochester, NY 14625
Mar 27, 2006 Suited for motion control applications, ServoWire SD series is comprised of 14 drives ranging in size from 3-60 A. Products include analog input and output as well as 8 digital I/O points and 2 high-speed sensor inputs, which are connected via pluggable terminal blocks with LED indicators. Offering 600-15,000 W of output power, 230 Series accepts 115 or 230 Vac inputs, while 460 Series offers 2,400-24,000 W of output power and accepts 230 or 460 Vac inputs.

Retsch, Inc.    Newtown, PA 18940
Mar 27, 2006 Along with all-digital time, temperature, and airflow controls, Fluid Bed Drier TG 200 features quick release cover and blower that does not have carbon brushes. Constant flow of warm air in Rapid Dryer TG 200 keeps particles agitated and separate, resulting in gentle and uniform drying process without localized overheating or agglomerations. Loose, thoroughly mixed product is produced within 5-20 min, depending on sample characteristics, quantity, and moisture content.

Gortrac Div. Of A & A Mfg. Co.    New Berlin, WI 53151
Mar 27, 2006 Consisting of single-piece extrusion, Bandtrac(TM) Cable and Hose Carriers eliminate noise, wear, and vibration inherent to link-style carriers, making them suited for laboratory and other sensitive applications. Because they have no moving parts, they exhibit low wear. Units require only mounting bracket, and allow accessibility at any point to cables they protect.

3M    St. Paul, MN 55144
Mar 27, 2006 With 99% stainless steel construction, 3M-Matic(TM) Case Sealers conform to NEMA standard 250 type 4x specifications for watertight enclosures. Fully automatic Model 800af-s is adjustable and provides consistent seals on range of RSCs at up to 28 cases/min. Random Model 700r-s seals up to 15 cases/min, automatically adjusting to height and width of each box. Model 700a-s features 4-belt upper and lower drive system that conveys uniformly sized RSCs for sealing up to 30 cases/min.

Sensoray    Tigard, OR 97223
Mar 27, 2006 Model 2652 monitors and controls up to 8 solid state relays via single Category-5 patch cable connected to 2601 communication module. Each SSR socket may be populated with ac in, ac out, dc in, or dc out SSR. To help minimize errors from electromechanical switch bounce, module applies software debounce filter to each input SSR. While configured as output, SSR may be controlled by client, or it may operate as PWM output with rate and duty cycle specified by client.

PIRTEK USA    Rockledge, FL 32955
Mar 27, 2006 Featuring respective working pressures up to 3,000 and 5,000 psi, 100R7 and 100R8 thermoplastic hose assemblies are available in standard black cover perforated for use on pneumatic systems. Hoses manufactured with orange cover are designed for use in non-conductive applications. In addition, 100R7 hoses are available in twin line form for use over mast and pulley systems on forklift trucks. It performs in temperatures down to -70°F.

Abovenet    San Jose, CA 95113
Mar 27, 2006 As pre-provisioned service, dcXchange delivers DWDM, SONET, and Gig E connections over dedicated DWDM core network for Enterprise, Carrier, and Indirect Sales customers. This data center to data center service offers flexibility to support applications from media and expanding wireless to financial interconnection requirements.

Epson America, Inc.    Carson, CA 90746
Mar 27, 2006 Perfection V700 Photo and V750-M Pro scanners incorporate double lens system that enables scanning of 35 mm, 2¼ in., and 4 x 5 in. medium format film. Both include USB 2.0 and FireWire connectivity. Featuring fluid mount accessory, V-750M Pro enables photographers to perform wet scans. Products feature 6,400 dpi resolution, optical density of 4.0, and Digital ICE(TM) Technologies for automatic removal of scratches and dust from film, and surface defects from reflective prints.

Maximizer Software Inc.    Vancouver V6E 2N7  Canada
Mar 27, 2006 Maximizer v9 is sales and contact manager software designed to help individuals, home offices, and small businesses manage and profile customers and prospects. Featuring Action Planner, Microsoft Outlook and handheld PDA synchronization, opportunity management, Computer Telephony Integration, and BI and Reporting, software tracks every sale and maintains relationships for repeat business. It comes with Data Integrity Controls for contact information to be checked for duplicates.

Insightix Ltd.    Atlanta, GA 30319
Mar 27, 2006 Designed for small to medium businesses, DID Collector Lite obtains inventory of all network elements and associated properties. By providing detailed and searchable physical network topology map of IT infrastructure, software enables definition of authorized devices, and identifies and locates unauthorized devices. Software detects changes made to IT infrastructure and its inventory in real-time and sends alerts as events occur.

Shuttle Inc.    Deutschland   Germany
Mar 27, 2006 RoHS compliant XPC Barebone SD36G5M Viiv-ready small form factor PC is built on G5 case design and features SilentX technology for quiet operation. Integrated VFD-display provides status information and is compatible with MS Windows XP Media Center 2005. PC features Intel 915G Express chipset, support for DDR2 memory, 1066 MHz FSB, PCI and PCI-Express x16 slots, as well as S-ATA and USB 2.0 connectors.

Volusion, Inc.    Austin, TX 78759
Mar 27, 2006 Volusion eCommerce v4 provides One-Page Checkout, eliminating need for multiple steps and required registration, and minimizing cart abandonment rates. With guest checkout option, customers can remain anonymous since they are not required to create account while making purchase. Account can still be made, which in some instances may provide customer with user benefits.

Wildform, Inc.    Los Angeles, CA 90034
Mar 27, 2006 WildPresenter enables anyone to create Flash presentations, product demos, training videos, and sales and marketing materials. It combines screen recorder; PowerPoint/Flash converter; video/audio converter; suite of drawing, flowcharting, and text tools; software to capture video/audio from webcam, microphone, and videotape; animation and transition generator; text effects engine; and timeline editor. Flash output is suited for Internet, corporate intranets, CD-ROMs, and mobile devices.