MGR Industries, Inc.    Fort Collins, CO 80524 8457
Apr 12, 2006 Able to withstand spray washing and environments with high concentration of airborne particulates, 15 in. touch screen APC Technology(TM) FT2255 offers stainless steel housing with Roxtec(TM) gland system. Allowing gloved operation, unit features hardened glass face and operating range from -10 to 55°C. Product includes Centrino® Pentium® M processor, 256 MB memory, 60 GB 5.5 in. HDD storage, 3 serial, 1 parallel, 2 USB, 2 LAN and PS/2 keyboard/mouse I/O ports, and VESA mounting.

North Safety Products, Inc.    Cranston, RI 02920
Apr 12, 2006 Model ER2000CBRN Emergency Escape Respirator offers 30 minute protection from non-immediately dangerous to life and health atmospheres containing chemical, biological, radiological, and nuclear respiratory hazards. It features translucent polyurethane, universally-sized hood with head harness and dual cartridge design for user comfort. Respirator comes equipped in sealed inner bag and double lined, belt-mounted nylon carry bag, and training kit is also available.

NKK Switches    Scottsdale, AZ 85260-3420
Apr 12, 2006 Available in single- and double-pole, momentary or maintained actions, and in 6 circuit configurations, WT series of toggle switches are rated at 10 A at 125 Vac and 6 A at 250 Vac, or 10 A at 30 Vdc. Operating temperature range is -22 to +158°F, and sealed construction enables use in outdoor and harsh applications. Toggles feature heat resistant resin outer housing that meets UL 94V-0 flammability standards, and actuator and base are epoxy sealed to prevent entry of contaminants.

Metabo Corp.    West Chester, PA 19380 4243
Apr 12, 2006 PowerMaxx kit includes cordless drill/driver, carrying case, two 4.8 V batteries, and charger. Weighing 1.5 lb, tool drills up to 1/8 in. in steel and ¼ in. in soft wood using ¼ in. solid steel keyless chuck accessory, and offset screw driving attachment rotates 360° allowing for screw driving in tight spaces. Two-speed gearbox and soft-start motor deliver no-load speed of 0-200 rpm in screw mode and 0-600 rpm in drill mode, and max torque is 80 lb-in.

PennEngineering Motion Technologies, A PennEngineering Company    Harleysville, PA 19438 0003
Apr 12, 2006 MAE® Series BM brushless servomotors are available in 9 models incorporating 4 or 8-pole stators, motor lengths of 55-274.5 mm, external diameters of 5.1-10 cm, and rated torque up to 6 Nm. Optional Hall effect sensors and encoders can be added to provide position and speed feedback. Optimized integration of copper in stator winding and engineering of rotor structure allow maximum concentration of magnetic flux. High-energy NdFeB permanent magnets are used in motor construction.

Kistler Instrument Corp.    Amherst, NY 14228 2119
Apr 12, 2006 Type 5030A MiniAmp series of sensor amplifiers measures less than 1.5 in. square and can be mounted close to sensor on moving machinery components. Amplifier inputs accept any piezoelectric sensor operating in high impedance, charge mode. Momentary data events are reproduced due to wide bandwidth, and with 2 measuring ranges, products can be digitally switched while in operation. Enclosure is watertight to IP65.

Kistler Instrument Corp.    Amherst, NY 14228 2119
Apr 12, 2006 Consisting of piezoresistive pressure sensor and digital charge amplifier, 4079A series enables measurement of cavity pressure in polymer molding with long cycle times. With ability to be integrated into injection molding machines, sensors record reaction temperatures and are free of harmful media. Versions are available for 5, 10, 20, and 50 bar pressure ranges in applications to 180°C.

Kistler Instrument Corp.    Amherst, NY 14228 2119
Apr 12, 2006 Accelerometer calibration systems line includes 8802A Laboratory Calibration Reference Standard System and 8804A Laboratory Vibration Calibration System and features 5022 frequency compensated charge amplifier. Systems exhibit repeatability from 10-10,000 Hz over wide amplitude range, and are calibrated for sensitivity of 10 mV/g that is adjustable to tolerance of ±0.1%.

Saelig Co., Inc.    Pittsford, NY 14534
Apr 12, 2006 USB 2.0-powered and connected, PicoScope 2105 USB Pen Scope and software convert laptop or desktop PC into oscilloscope without additional probes or power supplies. PicoScope features equivalent time sampling (ETS) that works on repeating, stable signals by building up waveform from successive acquisitions. ETS sample rate for stable signals is up to 2 GS/s. Probe offers 24 kS buffer and 100 MS/s sampling enabling users to zoom in to high-speed signals.

New Pig Corporation    Tipton, PA 16684 0304
Apr 12, 2006 PIG® Portable Spill Kit contains supplies to clean up non-aggressive spills of up to 6 gal. Constructed of double-wall vinyl-coated canvas, tote bag features wide-opening mouth and self-standing design. It incorporates PIG® Mat, PIG® Socks, personal protective equipment to shield single spill responder, PIG® Multi-Purpose Repair Putty, temporary disposal bags for used absorbents and PPE, internal and external pockets, and adjustable padded shoulder strap.

Tekni-Films    Somerville, NJ 08876
Apr 12, 2006 TEKNIFLEX® PCTFE Modified Atmosphere Blister Package incorporates one or more Activ-Strip® polyethylene dessicant strips into rib design of card, linking every cavity with dessicant. Activ-Strip® does not come in contact with product, is dust free, and complies with EU and US pharma and food regulations. Dessicant makes it possible to minimize headspace moisture content to extend shelf life of products.

Geisler, J. L. Corp.    Warren, MI 48092
Apr 12, 2006 Setting up in seconds, free-standing YellowJacket Devices provide effective way to route traffic inside and outside plant, and can also be used to mark temporary machine or construction sites. Each one folds flat to 4.5 in. thick. Ball/detent design snaps units into place, while flat surfaces and several reflective points make devices highly visible.

CNC Software Inc.    Tolland, CT 06084
Apr 12, 2006 Mastercam X Wire delivers part modeling and EDM programming, tab creation, and wirepath verification. Operations Manager provides single place to create, modify, and analyze all aspects of toolpath. Full associativity lets user modify geometry, tooling information, and machining parameters to get accurate, updated toolpath. To maximize efficiency, software offers 2 and 4-axis programming, 2-axis contouring, and 4-axis synchronization with automatic skim and reverse cuts.

Hub City, Inc.    Aberdeen, SD 57402
Apr 12, 2006 Part of Hub3® CleanLine UltraPlus(TM) product line, stainless steel Hub3® Drives are available in 2 models with ratings up to 18 hp. Sanitary design features smooth machined exterior surface, profiled to allow for cleanability with no places for contaminants to collect.

French Technology Press Office, Inc.    Chicago, IL 60601
Apr 12, 2006 Able to yield up to 240 pieces/hr, ROLLEXPRESS CNC - CONE makes it possible to roll, in single revolution, conical parts that have round shape and triangular, square, trapezoidal, or other polygon-shaped cross sections. With CNC, users can change cone-rolling program in 15 seconds. Product design is changed without any tooling or dismantling.

Gaumer Process Heaters    Houston, TX 77040
Apr 12, 2006 Utilizing heavy-duty, corrosion-resistant incoloy heating elements, Over-the-Side Immersion Heaters feature sealed terminals, welded spacers and heating elements, and Evenflow configuration. Products are designed for heating clear, opaque, or hard-to-heat liquids from water to raw crude in containers such as tanks and drums. Heaters come in capacities from 8-120 kW and lengths from 21-124 in. and may be removed for cleaning or repairs.

Gaumer Process Heaters    Houston, TX 77040
Apr 12, 2006 Designed for use in heating revolving rolls, platens, molds, jacketed tanks, and autoclaves, custom Gaumer® Hot Oil System (GHOS) series has pre-engineered design package tested under continuous operation at temperatures to 650°F. Incoloy 800 sheath heating elements are arranged to provide even heat inside tube bundle, while Buffer Tank design solves oil degradation problems associated with hot oil (over 150°F) reaching expansion tank without need for nitrogen purge system.

ControlAir Inc.    Amherst, NH 03031 2315
Apr 12, 2006 Designed to withstand harsh environments, Type 350/360/370SS Series are available with automatic drain option, low-temperature option for arctic applications, and stainless steel filter. Construction also includes 316 stainless steel housing and fluorocarbon diaphragm. Compatible with sour gas and adaptable to off shore environments, products meet all NACE standard MR-0175 requirements for corrosive resistance. Hardware allows direct, inline, or panel mounting.

Ergodyne Corp.    St. Paul, MN 55108
Apr 12, 2006 Made of closed-cell foam rubber that will not compression set, ProFlex® pads come in 3 sizes to provide workers with comfort and protection when kneeling or standing on hard surfaces. Silicon-free, non-marring, non-conductive products are resistant to petroleum products and other liquids. ProFlex 380 has handle for portability, while ProFlex 385 and 390 feature beveled safety edge. Each pad is safe to use on delicate surfaces as well as in harsh environments.

FANUC Robotics America, Inc.    Rochester Hills, MI 48309 3253
Apr 12, 2006 Suited for applications from welding to machine loading, R-2000iB comes in multiple model variations, including 165 kg base model and rack-mount model. Slim arm and wrist assembly enables operation in tight workspaces. Vibration control function, provided via R-J3iC Robot Controller, minimizes robot vibration during motion. Robot Link function controls and coordinates up to 10 robots, preventing interference in multi-robot applications.