Acromag, Inc.    Wixom, MI 48393 7037
Jul 03, 2012 Suited for simulation, communications, signal intelligence, and image processing, Model XMC-6VLX features 128M x 64-bit DDR3 SDRAM buffers that store captured data prior to FPGA processing. Front I/O option adds two 2.5 Gbps SFP connectors and 36-pin VHDCR connector for JTAG, USB, and 22 SelectIO, while rear I/O supports 8-lane high-speed serial interfaces on both P15 and P16 XMC ports for PCI Express, Serial RapidIO, 10-Gigabit Ethernet, or Xilinx Aurora implementation.

Anritsu Co.    Richardson, TX 75081
Jul 03, 2012 With Option MS4640A-041, VectorStar MS4640A and ME7838A are capable of measuring noise figure from 70 kHz to 125 GHz, enabled in part by receiver optimized for measurements from 30-125 GHz. Noise figure measurements enable test engineers to determine potential degradation of signal-to-noise ratio from system components in applications including radar, wireless communications, and digital communications.

Busch, Inc.    Virginia Beach, VA 23452
Jul 03, 2012 With options that address specific harsh process issues and energy saving requirements, DS series COBRA dry screw vacuum pumps target high-capacity load lock and harsh process vacuum applications in solar market as well as flat panel manufacturing applications. Frame design, with its separate booster and screw pump frames, facilitates installation and maintenance. Pumps meet needs for rapid cycling of big chamber pump downs and large volumes of hydrogen during solar cell manufacturing.

RRSat Global Communications Network Ltd    Hawley, PA 18428
Jul 03, 2012 Launched on Spacecom's AMOS-5 Satellite at 17° East, Ku-Band MCPC Platforms Ku-1 (West Central Africa) and Ku-3 (East West Africa) can be used for providing Direct To Home (DTH) content to Sub-Saharan Africa. This gives TV and radio channels opportunity to reach new audiences; RRsat is able to bring content from Europe, Asia, and Americas for DTH distribution.

Spansion Inc.    Sunnyvale, CA 94088 3453
Jul 03, 2012 Designed to enable voice-controlled system interfaces, Spansion® Acoustic Coprocessor comprises custom-designed logic and high-speed memory and leverages Nuance Communications' VoCon® voice technology. Coprocessor accelerates and optimizes voice-enabled HMIs while offloading acoustic processing workload from conventional CPU. Support for large acoustic databases with multi-lingual, gender, and tonal sounds improves response time and accuracy.

DELO Industrial Adhesives    Windach   Germany
Jul 03, 2012 Designed to bond tiny chips to defined positions on RFID antenna, DELOMONOPOX AD268 adheres to variety of flexible and rigid substrates, including PET, polyimide, FR4, copper, aluminum, and silver. Anisotropic epoxy resin cures in 6 seconds at 190°C with thermode, enabling up to 20,000 microchips to be bonded per hour on flip-chip production system.

TransLattice    Santa Clara, CA 95051
Jul 03, 2012 By enabling system administrators to script routine management functions, TransLattice Automation Kit provides efficient way to manage large clusters of TransLattice nodes. Administrators can automate tasks such as scaling to additional nodes, specifying data placement policies, upgrading software, deploying new applications or databases, and configuring database authentication. With TAK's interface, users can also duplicate cluster environments for multi-tenancy or testing purposes.

iSoftStone    Dongbeiwang West   China
Jul 03, 2012 RapidStart® offers suite of Solution Accelerators that support efforts to build, deploy, and manage new technologies more efficiently. Solution Accelerators include pre-built code, which can be leveraged across various application scenarios to provide consistent architecture, and set of components with which to build scalable solutions. As scalable tool, BI Solution Accelerator provides customized BI data extraction, transformation, and loading (ETL) frameworks.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Jul 03, 2012 Agilent N1012A compliance test software performs range of oscilloscope- and network analyzer-based tests for OIF CEI 3.0 Implementation Agreement. It also provides 5-28 Gbps physical-layer transmitter measurements and has debug mode to troubleshoot designs. Aiding in automated test application development, Agilent N1019A software lets users create tests, automated test groups, test limits with descriptions, and customized reports. Both programs are used with Infiniium 86100D DCA-X oscilloscope.

InspectionXpert Corp.    Apex, NC 27502
Jul 03, 2012 As add-on for InspectionXpert for PDF and InspectionXpert OnDemand, CMMXpert imports CMM results data from any CMM software directly into InspectionXpert projects. Functionality eliminates need to hand-key results data into first article or in process inspection reports. Results data merges with ballooned characteristics in InspectionXpert, and results are color-coded both on drawing and in measurement interface to show in/out of tolerance or marginal conditions.

Fisher Controls Regulator Div., Emerson Process Management    McKinney, TX 75070 8004
Jul 03, 2012 Featuring 1,480 psig inlet/outlet rating, Tartarini(TM) 10 in. Type FL Regulator is suitable for city gate stations, power plant fuel supply, and turbine fuel supply. Modular, pilot-operated unit features no-bleed design, balanced trim, and bubble-tight shut off. Depending on flows and pressure drop, SR II noise attenuation option can reduce noise levels as much as 20 dB (A). Regulator can also be configured as relief valve or backpressure regulator.

ZTR Control Systems    Minneapolis, MN 55379
Jul 03, 2012 Based on microprocessor technology, NEXSYS(TM) III-i provides optimum adhesion in all weather conditions and can replace old relay logic or modules. Unit features integrated SmartStart® IIe automatic engine start/stop system, on-board diagnostic display, and remote diagnostic capability. With integrated voltage regulator, including battery charging and current limiting features, extra modules can be eliminated.

IMI Sensors, Div. of PCB Piezotronics    Depew, NY 14043-2495
Jul 03, 2012 Without requiring any gateways, mesh, or repeaters, Echo® Wireless helps users safely monitor health of critical machinery. Extended Range Radio Frequency (ERRF) technology is used to transmit long distances in typical plant environments. Comprised of Echo Wireless Vibration Sensors, EchoPlus Wireless Junction Box, receiver, and software, system transmits at 0.75 mW Effective Radiated Power (ERP) in unlicensed 900 MHz band and does not interfere with other wireless communications.

TouchSystems Corp.    Hutto, TX 78634
Jul 03, 2012 Equipped with Dispersive Signal Technology, 46 in. Model X4650D-U2HB features high brightness of 1,200 cd/m² and high contrast ratio of 3,500:1, allowing it to be viewed during both daytime and evening hours. In addition, display utilizes quarter-lambda film, which allows viewing by users wearing polarized sunglasses. Consuming 320 W, Model X4650D-U2HB includes ambient light sensor, internal temperature sensors, self-diagnostic tools, and built-in expansion slot.

Rigol Technologies, USA Inc.    Oakwood Village, OH 44146
Jul 03, 2012 Covering frequency range of 9 kHz to 1.5 GHz, Model DSA815 has typical displayed average noise level of -135 dBm, offset phase noise of -80 dBc/Hz at 10 kHz, and total amplitude uncertainty of less than 1.5 dB. Analyzer includes AM/FM demodulation and preamplifier, plus optional EMI filter, quasi-peak detector kit, and 1.5 GHz tracking generator. With minimum resolution bandwidth of 100 Hz, digital IF filter facilitates ability to distinguish between small signals close in frequency.

Rigol Technologies, USA Inc.    Oakwood Village, OH 44146
Jul 03, 2012 With bandwidths from 70-200 MHz and vertical range of 500 µV/div to 10 V/div, DS2000 series provides noise floor suited for capturing smaller signals. Standard memory depth is up to 14 Mpts, extendable to 56 Mpts, and 8 in. WVGA display offers 256 levels of intensity grading to aid visualization of complex signals. Capable of real-time waveform recording and analysis, 2-channel oscilloscope has 2 GSPS max sample rate, trigger functions, and optional serial decoding.

ASG, Div. of Jergens, Inc.    Cleveland, OH 44110
Jul 02, 2012 Designed to prevent defects in products before they are made, Sequence Recognition System monitors fastener tightening sequence and provides feedback to disable/enable tool based on pre-programmed characteristics if proper fastener sequence is not followed. System can discern between fasteners with 0.25 in. center to center distances and greater. When used with ASG Precision Fastening X-PAQ(TM) system, sequence recognition system ensures proper torque, sequence, and revolution tolerance is achieved.

Merritt, J. R., Controls, Inc.    Stratford, CT 06615
Jul 02, 2012 Made of Delrin, Models MG9, MG9-4, and MG25 meet needs of industry users who operate overhead, container, and gantry cranes, as well as mining dredges, draglines, and shovels. When grips are mounted on joysticks and master switches, user can maneuver joystick by placing handle shaft in space between thumb and pointer finger. Palm handles accommodate tactile, sealed, high-life, and momentary pushbuttons, maximizing functionality in one controller.

Larson Electronics, LLC    Kemp, TX 75143
Jul 02, 2012 Providing 13,000 ft² of coverage, EPL-TP-1X70-100 quadpod mounted metal halide light features 4-leg base for stability and 4-8 ft height adjustability. This 70 W light, producing 32,000 lm, is Class 1 and 2, Division 1 and 2 approved and withstands wet and corrosive marine locations. Lamp housing, covers, and fittings are copper-free aluminum, and ¾ in. thermal shock- and impact-resistant tempered glass lens protects metal halide bulb and reflector assembly.

AVX Corp.    Raleigh, NC 27604
Jul 02, 2012 Based on thin-film multilayer technology, ITF High Directivity LGA Coupler displays stable coupling factor of 24 ±2 dB over frequency range of 700-2,700 MHz, suitable for wireless systems. Unit features 0402 chip size, self-alignment during reflow, efficient heat dissipation, and power rating of 3 W. Rated for use from -40 to +85°C, coupler has lead-free Sn100 nickel/solder-coated terminations for compatibility with automatic soldering technologies.