Elma Electronic Inc.    Fremont, CA 94538
May 26, 2006 With sheet metal design and full pluggability, Type 39c HA Chassis are available in 1-4 U heights in horizontal-mounting orientations. Compliant to PICMG specifications and IEEE 1101.10/.11, enclosures feature side-to-side 200 cfm cooling, 300 mm depths, and rear I/O options. CompactPCI backplanes include pluggable 47-pin connectors for hot swapping power supplies. Pluggable fan tray headers and optional shelf management modules are available.

EYE Lighting International of North America, Inc.    Mentor, OH 44060
May 26, 2006 Fixture Analyzer Kit helps maintenance personnel identify in less than 1 min. HID (High Intensity Discharge) fixtures that are past their useful life. It features Test Socket Adapter with safety lead connectors that screws into fixture socket, allowing maintenance personnel to safely perform test without reaching into wiring box with test probes while fixture is energized. Hard-shell carrying case protects meter and serves as storage container.

Hoist Liftruck Mfg., Inc.    Bedford Park, IL 60638
May 26, 2006 Neptune Series pneumatic marina lift trucks have 20 ft forks and tight maneuverability for dry-stacking boats. Corrosion protection features include galvanized carriage, stainless steel fittings, 3-step epoxy paint process for chassis, and zinc coating on exposed metal. Trucks have 96 in. load center and are powered by 5.9 L Cummins turbocharged diesel engine. Load-sensing hydraulic system provides visibility at negative and positive lift positions.

ELTIMA Software GmbH    Berlin   Germany
May 26, 2006 Emulating standard hardware modems and duplicating functionality, Virtual Modem PRO v2.0 maps virtual IP-modems to virtual serial ports in operating system using Ethernet network. Up to 255 modems can be created in any system. Program is suited for any automation system that collects data from remote hosts using modem and telephone lines such as manufacturing/warehouse DAQ systems, fiscal/data transfers in banking system, and retail management.

Delcam USA    Salt Lake City, UT 84111
May 26, 2006 Part of FeatureCAM Version 2007, FeatureMILL3D machining strategies help keep load on cutter as consistent as possible and minimize sudden changes in cutting direction. With rough and filling strategies, arcing moves can be used when approaching and leaving job, and with Race Line Machining, roughing passes are progressively smoothed out as toolpaths move further from main form. Spiral path milling keeps cutter in constant contact with job, eliminating number of air moves needed.

Fox Electronics    Fort Myers, FL 33905 5022
May 26, 2006 Measuring 2.5 x 2.0 mm with 0.8 mm profile, 3.3 V HCMOS Model F230 requires 7 mA at 12 MHz and 5 µA during standby operation. It offers frequency range of 0.84-75 MHz, frequency stability of ±100 ppm, and operating temperature range of 68-158°F. RoHS-compliant unit is suited for portable and space-constrained devices such as laptops, PDAs, cell phones, DVD players, and MP3 players as well as PCMCIA cards, Bluetooth, and portable test equipment.

Duff-Norton    Charlotte, NC 28241 7010
May 26, 2006 Using combination of precision guided translating tube system coupled to motor and reducer via trunnion housing, SCN Series SuperCylinders(TM) come in offset, parallel, and right angle configurations. They offer standard strokes up to 13 ft and speeds to 379.5 ipm. Enclosure of screw by tube system shields it from environmental contaminants and retains lubricants. Cylinders use hydraulic cylinder grade wiper seals to exclude dirt from screw area.

Keithley Instruments, Inc.    Cleveland, OH 44139 1891
May 26, 2006 Comprised of single- and dual-channel models, Series 3400 lets users set critical parameters - amplitude, rise and fall times, pulse width and duty cycle, frequency, delay, and offset - with regards to application-specific needs. Products have frequency range of 1 mH to 165 MHz and pulse amplitudes of ±10 V or ±20 V. Delivering precise control for pulse widths from 3 nsec to 1,000 sec, generators exhibit minimal voltage overshoot and edge-to-edge jitter.

Raztec (NZ) Ltd.    Christchurch   New Zealand
May 26, 2006 With tolerance to electrically noisy environments, Series 3® Current Transducer incorporates industry standard communications protocol for direct connection to microcontroller's I/O port. Single package design provides current sensing from 1 mA to over 80 A, and offers galvanic isolation from circuit under measurement. Close-coupled, 12-bit ADC provides precisely calibrated digital output stream that is directly proportional to current flowing in conductor.

GBC Materials Corp. Div., Morgan Advanced Ceramics    Latrobe, PA 15650
May 26, 2006 VX Crucibles operate under severe conditions including temperatures up to 1,450ºC and extreme thermal shock conditions. They offer thermal expansion of 6 x 10^-7/°C at 1,000°C, low specific gravity, low thermal conductivity, and high electrical resistivity. Available in various shapes and sizes, products are suited for brazing, sintering, melting, and heat treating applications in dental, jewelry making, and metal brazing industries.

Topper Industrial    Sturtevant, WI 53177
May 26, 2006 Industrial Tilt Carts feature self-adjusting tilt speed control system with metering valve and flow control assembly that allows load tilting at same speed regardless of load weight or center of gravity. Valve eliminates need of manual adjustment based on load weight and helps eliminate risk of accident because of an improper adjustment.

HBM, Inc.    Marlborough, MA 01752 3014
May 26, 2006 With lightweight housing that fits into confined spaces, K148 calibration unit has 5 calibration ranges, each with 10 steps for calibrating both dc and carrier-frequency amplifiers from 225 Hz to 4.8 kHz from ± 0.2 mV/V to ± 100 mV/V. Accuracy and linearity of 0.0025% reduces to 0.01% for dc and carrier frequencies of 600 Hz and higher. Unit can be connected to all amplifiers for strain gage sensors with 1-8 input channels.

Kärcher    Camas, WA 98607
May 26, 2006 Available in 3 models, Portable Hot Water Pressure Washers feature cleaning range of 2-3.5 gpm and 1,000-2,000 psi pressure. They include cold-rolled heating coil made of ½ in. Schedule 80 steel pipe, burner with transformer, safety rupture disk, thermal pump saver, and water-resistant control box which houses switches, magnetic starter, and adjustable thermostat. Rugged steel chassis and cage painted with epoxy powder coat finish provide weather protection.

Sun Microsystems, Inc.    Santa Clara, CA 95054
May 26, 2006 Comprised of Justification Review, Architecture, and Implementation Services, Sun Enterprise Migration Suite assists with migration to open Solaris(TM) 10 operating system and x64 server platforms. Suite utilizes formal methodologies and tools that help make enterprise's justification to migrate IT platforms more accurate, flexible, and robust. Sun Application Migration Service is also available to help fast-track transition of software applications to Solaris 10.

The Reynolds & Reynolds Co.    Dayton, OH 45430
May 26, 2006 DataConnect option for Networkfleet(TM) wireless vehicle management system provides ability to integrate vehicle and GPS data into 3rd party software applications. GPS data can be integrated into routing/dispatching applications to pinpoint current vehicle locations and efficiently route drivers. Integrating diagnostics data into asset management applications enables users to schedule repair and maintenance of vehicles when diagnostic trouble code is triggered.

AQUATRA, Inc.    Vancouver V6H 4E4  Canada
May 26, 2006 Remote Desktop Control enables users to monitor and remotely access their computers to launch programs, shutdown or reboot computer, or fix technical problems. With split-screen technology, one user can monitor multiple computers, or many users can control one remote computer. Secure multiple connections support is offered by 320-bit RSA authentication protocol and 64-bit encryption. Other features include DHCP support, ability to run program as NT service, and task logging.

ExtraLabs Software    Moscow 111116  Russian Federation
May 26, 2006 Feed Editor v3.5 RSS editor enables users to create, edit, and publish RSS feeds and podcasts. It offers support for various RSS formats, podcasting support, WYSIWYG HTML editor to edit feeds, XML editor, RSS Feed preview, FTP upload and publishing, automatic date management, and ability to convert CSV/HTML to RSS and back.

Aquire    Irving, TX 75039
May 26, 2006 Unifi(TM) enables organizations to aggregate, display, and manage workforce information collected from disparate business solutions. Aggregated information allows managers to analyze how reporting relationships impact business processes, and examination of operational expenses can surface hidden costs, overruns, broken processes, and operational inefficiencies. Visual representation of workforce data enables team members to correct issues within their span of control.

Good Technology, Inc.    Santa Clara, CA 95054
May 26, 2006 With capabilities for group administration and compliance management/remediation, GoodLink v4.8 enables enterprises to centrally manage and secure smartphone deployments ranging from hundreds to thousands of users. Policies that segment devices into groups based on employee roles, geographic location, and operating system can be established, while filters ensure that devices accessing corporate network are using only pre-authorized and approved mobile operating systems.

Astea International Inc.    Horsham, PA 19044
May 26, 2006 Offering real-time, remote inventory insight and staff optimization capabilities, FieldCentrix Enterprise v4.1 comes with toolkit for customizing, extending, or building mobile applications that synchronize and speed workflow. Service lifecycle management (SLM) product incorporates GPS and Fleet Management module as well as tracking tools that capture safety and performance issues. It also provides flexible options for reporting and tracking.