Imperx Inc.    Boca Raton, FL 33487
May 24, 2006 DPC Processor utility gives users ability to create pixel-correction tables for company's CCD cameras. Defective Pixel Map (DPM) file stored in camera's internal non-volatile memory will correct values put out for up to 128 defective pixels. System uses correction algorithm based on coefficients in DPM file to calculate digital value camera would have put out for each defective pixel. Main dialog window provides controls required to set thresholds.

SteelMax LLC.    Centennial, CO 80111
May 24, 2006 Capable of cutting metal without burring, heat distortion, or sparking, 9 in. SteelMax S9 circular saw is designed for mild steel, SS, and aluminum. With 45° beveling capability, 15 A motor operates at 2700 rotations/min. S9 is used in applications like tubing, pipe, floor grating, angle iron, plate steel to ½ in. depth, and corrugated metal roofing. It weighs 20 lb, features 25 mm arbor bore, and adjustable depth of cut up to 3¼ in.

ICS Garland Inc.    Cleveland, OH 44125
May 24, 2006 Providing protective overlayments for concrete and topcoat for decorative applications, Chemi-Cote(TM) UR 9100 is VOC compliant, virtually odorless, and can often be applied without shutting down operations. Coating is resistant to many chemicals including aromatic and aliphatic hydrocarbons, chlorinated solvents, hydraulic fluids, jet fuel, acids, alkalis, alcohol, detergents, salts, and cutting oils. Chemi-Cote(TM) UR 9100 is suited for loading docks, warehouses, and aisle ways.

ESAB Welding & Cutting Products    Florence, SC 29501
May 24, 2006 Housed in composite case weighing 53 lb, PowerCut® 650 manually cuts 5/8 in. and severs ¾ in. Output is 40 A at 40% duty cycle, 30 A at 60% duty cycle, and 22 A at 100% duty cycle. Torch cable prevents snagging on fixtures and materials, while XT nozzle features extended shape for visibility. PowerCut 650 offers drag or standoff cutting and template-following features that duplicate curves or straight lines. Adjustable output allows operator to tailor current to material being cut.

STMicroelectronics    Lexington, MA 02421
May 24, 2006 Built into sensitive home and corporate telecom products such as phones and broadband modems, Series SMPxxMC Trisil Surge Arresters provide failsafe operation and exhibit no degradation over time. In event of extreme lightning surge, short circuit can protect equipment and anyone standing nearby. Silicon chips have no effect on strength of high frequency ADSL signal and are fully compatible with ADSL2 and ADSL2+ standards.

Ripley Co.    Cromwell, CT 06416
May 24, 2006 Designed for safe end stripping of primary cable, WS 5A-DA features removable 3/8 in. adapter that allows tool to be driven by electric or battery-operated power drill. Product strips XLPE, polyethylene, and EPR insulation up to 400 mil thick on 600 V to 35 kV cables. Also suited for primary URD cable, adjustable end stripper has guarded cutting blade, knob for setting strip length from .625-2.5 in., and ability to accept SW-2 ratchet wrench for leverage.

Thermal Instrument Co.    Trevose, PA 19053
May 23, 2006 Model 600-9 SAN provides unobstructed straight through flow path for liquids or gases. Meter accuracy is ±.5% FS or 2.0% of reading, whichever is better, and flow range is 100:1 typ with option for 1,000:1 or greater available. Made of 316L stainless steel materials, product is available in ¼-12 in. sizes. Typical application is for food, beverage, and pharmaceutical industries.

Tripp Lite    Chicago, IL 60609
May 23, 2006 SmartOnline(TM) Hot-Swappable Modular UPS Systems feature 200-240 V input and output and PDU that manages all input and output power connections and includes manual bypass switch. All maintenance, from battery replacement to power module exchange, can be performed without powering down connected equipment. Offering remote management and N+1 configurability for fault tolerance, units are available in Models SU7500RT3U and SU10000RT3U, with 7.5 and 10 kVA capacities, respectively.

Astrodyne Corp.    Mansfield, MA 02048
May 23, 2006 Accepting universal input of 85-265 Vac, 15-65 W External Desktop Power Adapters offer single, dual, and triple outputs from 3.3-48 Vdc. They provide low ripple/noise of 1% peak-to-peak and operate at typical efficiency of 80%. All models have over voltage protection, over current protection, and I/O isolation of 3,000 Vac. Approved to UL, CSA, IEC, and VDE Safety Standards, adapters are suited for microcomputers, desktop peripherals, printers, and test equipment.

Bud Industries, Inc.    Willoughby, OH 44094
May 23, 2006 Featuring one-piece molded construction, Series CN includes flanged versions in 10 sizes from 3.52 x 1.38 x 1.22 in. to 8.75 x 5.74 x 2.25 in. and un-flanged models in 15 sizes from 2.36 x 2.16 x 1.22 in. to 10.81 x 6.89 x 2.64 in. Optional mounting flanges are molded to base of enclosure, allowing units to be opened without need to detach them from wall. Enclosures are suited for instrument cases, meter cases, and junction boxes in wet and dirty, marine, and washdown environments.

Creform Corp.    Greer, SC 29652-0830
May 23, 2006 Featuring low profile design, BST AGV Drive Unit consists of drive motor, 24 Vdc power supply, control electronics, and guidance sensors. Unit travels along magnetic tape guide path, glides under stationary push cart, and engages cart by extending catch pin into cart's frame. Drive then conveys cart to required workstations or load/unload points and disengages from cart. Offering capacity of 1,100 lb, unit provides unidirectional travel with speed range of 13-164 fpm.

Anver Corp. - Anver.Com    Hudson, MA 01749
May 23, 2006 Available in 10 sizes, Vacuum Probe Cup incorporates spring-loaded Delrin® probe that actuates normally-closed internal check valve allowing vacuum to be created only when load is present. Probe protrudes from center and touches load first to permit vacuum flow. Unit suits large pick-up arrays used in high cycle applications. Vacuum is maintained at cup, and it provides instant attach-and-release. Applications include feeding equipment, processing, and packaging lines.

Thomas Industries, Inc.    Sheboygan, WI 53082-0029
May 23, 2006 With oil-less design that prevents contamination of pumped media, Series 5002 miniature diaphragm pumps are offered in EMC protected 12 and 24 Vdc versions that have maximum pressure rating of 40 m H₂O with maximum dry suction at 6 m H₂O. Single head Model 5002F has open flow rate of 400 mLpm while twin head Model 5002FZ has flow rate of 850 mLpm. Pumps are suited for chemical, medical, laboratory, industrial, and hygiene applications.

Security Engineered Machinery Co., Inc.    Westboro, MA 01581
May 23, 2006 Mounted in transportable, variable-height work platform, Mag EraSURE(TM) ME-P3E degausses magnetically recorded data from hard disks and tapes with nominal coercivity up to 5,300 Oe and 2,600 Oe, respectively. Array of permanent, high-energy rare-earth magnets enables unit to fully erase data and timing information in one 40-sec cycle. Automatic unit includes built-in hand crank that allows manual operation when power is not available.

HED, Inc.    Hartford, WI 53027
May 23, 2006 Solid-state CANLink models CL-103/202/302/303/414/416 can be used either in multiplexed CAN systems or to operate less complex equipment or dedicated systems with their single board controller capabilities. Along with multiple I/Os to handle various vehicle functions, compact products feature NEMA-4 rated Deutsch box package and boards with silicone coating for water/moisture protection. PCBs are 4 layers for EMI/EMF protection.

Copley Controls Corp.    Canton, MA 02021
May 23, 2006 Designed for torque control of brushless servo motors, Model 800-1514 dual-axis servo amplifier accepts encoder and Hall feedback data. Drive torque is controlled by ±10 V command from motion controller or PLC. It operates on 20-55 V isolated dc supply and delivers independently controlled 4 A peak and 3 A continuous outputs for driving high performance 3-phase motors. Measuring 6.58 x 3.9 x 1.17 in., amplifier provides dual-channel status indicators and protection circuits.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
May 23, 2006 Designed for finishing of dies and molds made of steel harder than 47 HRc, GC1610 CoroMill Plura carbide endmill provides direct machining in pre-hardened materials in single set-up. PVD-coated product with Pluratech quality is available in standard diameters ranging from 0.4-25 mm. Combination of solid carbide tooling solutions suits variety of milling including applications for tool and die and aerospace industries.

CS Hyde Company    Lake Villa, IL 60046
May 23, 2006 Suited for color code specific applications, processes, or products, Colored PTFE (Teflon®) Films and PSA Tapes (with adhesive) are available in blue, green, or yellow. Products feature tensile strength of 20-30 lb/in. and dielectric strength of 8,000-12,000 V. Films and tapes operate at 50-55°F and 45°F, respectively, and suit high temperature applications.

Clip Strip Corp.    Hackensack, NJ 07601
May 23, 2006 Molded of clear plastic, Roto Clip sign holders attach with spring tension clips and can be used on wood, glass, and acrylic shelving. They clip on grid panels, garment racks, display arms, wire panels, or product itself. Available in 9 models, sign holders come with 1-5 uni-socket joints to allow signage to be displayed in same plane as display fixture and merchandise, at an angle, or rotated.

Seco-Larm    Irvine, CA 92606-5012
May 23, 2006 Designed for cabinets and drawers, E-941SA-80 miniature electromagnetic lock measures 2¾ x ¾ x 1¼ in. It features 12 and 24 Vdc dual-voltage operations, and has 80 lb holding force. Product comes with 36 in. wire leads, removable bracket, and offers anodized aluminum housing, MOV surge protection, and no residual magnetism.