LAMBDA Laboratory Instruments    Zurich 8037  Switzerland
Jul 28, 2006 Suitable for continuous processes, MAXIFLOW Pumps are programmable with various remote control possibilities and have digital flow rate setting from 1-1,000. Tube compressing mechanics minimize pulsation, extending tubing life. With pump-flow INTEGRATOR and PNet PC control software, it is possible to use pumps to create gradients, follow kinetics of chemical or biological processes, and to measure growth rates of cultures in biotechnology.

Supertex Inc.    Sunnyvale, CA 94619
Jul 28, 2006 Suited for applications using 24/48 V inputs, constant current Models CL6 and CL7 feature built-in reverse polarity protection as well as over-temperature protection. With max ratings of 90 V, RoHS-compliant ICs are able to withstand transients without additional transient protection circuitry. Model CL7 also features active low enable input pin that allows logic level control of LED for on/off or PWM dimming control.

Samtec, Inc.    New Albany, IN 47151 1147
Jul 28, 2006 Available for Ethernet and USB applications, Acclimate(TM) Circular Interfaces meet IP68 specifications for dust and waterproof sealing. Offered with standard cable plugs up to 2 m in length, interfaces may be sealed on one or both ends. USB system can be specified with either A Type or B Type plugs on either end. Panel interface receptacles are self-contained and are terminated to board with standard USB or Ethernet cable jumpers.

Lee Industries, Inc.    Philipsburg, PA 16866
Jul 28, 2006 Portable, custom-designed Tanks and Kettles can be supplied with scraped-surface agitators along with high-shear and propeller mixers for applications to 2 million cps. Available with jacketing and insulation, vessels can be designed for pressure/vacuum services in addition to normal atmospheric operation. Ranging in size from 1 gal lab units to larger scale production equipment, units can include casters and push handles with pipe frame carts or flat caster plates.

Astrodyne Corp.    Mansfield, MA 02048
Jul 28, 2006 Available in 24 models that provide single outputs from 2.5-24 Vdc, Series ASD50 accepts 2:1 input from 9-72 Vdc and is designed to meet power conversion requirements in board-level applications such as data acquisition, communications, and industrial I/O. All models include continuous short circuit protection and internal input filter, as well as 1,500 Vdc I/O isolation. Fully encapsulated with aluminum cases, converters operate from -40 to +100°C.

Sensor Developments, Inc.    Orion, MI 48359
Jul 28, 2006 Designed to measure reaction torque on housing, Model 01294 Motor Flange Torque Sensor accurately determines output power from compressors, pumps, or turbine equipment. Since there is no need to integrate in-line rotating torque sensor, potential of electrical noise due to bearings or slip-ring brushes is eliminated. Custom sensor can be adapted to wide range of applications and motor face styles.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Jul 28, 2006 Available with 23 hp Kohler and 22 hp Robin engine options, gas-powered Bobcat(TM) and Trailblazer® provide multi-process welding with simultaneous generator and welding capabilities. Units can produce 10,500 W of Accu-Rated peak power for minimum of 30 seconds. Trailblazer models include Auto-Crater feature, which eliminates craters when using dc TIG process. Bobcat and Trailblazer diesel models include Low Fuel Shutdown, which shuts down engine before fuel is gone.

Palmer Wahl    Ashville, NC 28804
Jul 28, 2006 Thermocouple calibrator, Model TC621, can measure and simulate with accuracy of 0.02% of reading, temperature coefficient of 15 ppm/°C, and 14 different thermocouple outputs. Model TC622 also measures and simulates with accuracy of 0.02% of reading, but with temperature coefficient of 10 ppm/°C and 12 RTD types. With measurement mode, users can create database to design curves for sensors, after calibration, in relationship with corrections shown on calibration report.

Corning Cable Systems    Hickory, NC 28603-0489
Jul 28, 2006 Available in fiber counts of 288, 360, and 432, SST-UltraRibbon(TM) Gel-Free Cable consists of outdoor ribbon cable, in which dry water-blocking materials replace gels previously used. Design eliminates gel-cleaning solvents from workplace and need for cable damming procedures. Cable is fully compliant to ICEA outside plant cable standard and Telcordia GR-20-CORE Issue 2 requirements. It fits in 1.25 in. ID or larger ducts and is available with armored jacket options.

Metabo Corp.    West Chester, PA 19380 4243
Jul 28, 2006 Equipped with Tacho-Constamatic speed stabilization, 6 in. WEP14-150 Quick operates at nearly 100% of no-load speed of 9,000 rpm up to full rated amp load of 12 A. Non-locking paddle switch automatically turns grinder off when dropped, while Quick wheel change system allows tool-less wheel changes, and safety clutch allows operator to maintain control of tool in event of jam. Providing max torque of 31 lb-in., tool includes anti-vibration handle and overload protection.

Hobart Brothers Co.    Troy, OH 45373-2900
Jul 28, 2006 Designed for use with 100% CO2 shielding gas, Formula XL®-550 provides X-ray quality welds in all positions and features added deoxidizers to cut through light rust and mill scale with minimal pre-cleaning. Low hydrogen level helps eliminate cracking and does not allow worm tracks to form in weld under normal working conditions. Available in .045, .052, and 1/16 in. diameters, wire retains impact toughness in applications where post-weld stress relief is required.

J Walter, Inc.    Hartford, CT 06114
Jul 28, 2006 Manufactured with process that imparts high-low rib design into each wheel, Type 1 ZIP(TM) Cutting Wheels produce minimal friction and provide straight, cool cutting in mild steel, stainless steel, aluminum, and titanium. With rib design, there is virtually no heat discoloration when cutting thin stainless sheet. Reusable, round plastic containers replace standard corrugated boxes to provide protection and safe storage.

Steinmeyer Inc.    Bedford, MA 01730
Jul 28, 2006 Measuring 199 mm square with overall height of 32 mm, open frame Model KDT 180-DC provides total travel of 60 mm in each direction with straightness/flatness deviation of 1 micron. Manufactured from anodized aluminum, XY table achieves speeds up to 10 mm/s and accelerations of 0.1 m/s² with 5 µm accuracy and 1 µm repeatability. Unit includes backlash-free preloaded cross roller bearings and 90 mm square aperture to enable light or objects to pass through center of travel.

Rockwell Automation    Milwaukee, WI 53204
Jul 28, 2006 ControlLogix controller 1756-L64 provides speed and processing capabilities that meet plant floor application demands. Memory is used to store and execute recipe data or handle projects and applications with intensive data requirements. Also included, CompactFlash memory socket provides removable and portable nonvolatile storage for user programs and tag data. Controller firmware is also stored on CompactFlash card.

Monitor Technologies LLC    Elburn, IL 60119
Jul 28, 2006 Flexar(TM) guided wave radar sensor uses TDR (Time Domain Reflectometry) technology for continuous level measurement of powders and bulk solids as well as granular solids, liquids, and foodstuffs. Available with smart RS485 or optional analog output, solid-state product survives process temperatures up to 392°F and pressure to 580 psig max. It has max range of 100 ft for solids and 200 ft for liquids.

Instrumented Sensor Technology    Okemos, MI 48864
Jul 28, 2006 Attached to shipment, ShockTimer-Plus 3D(TM) (STP-3D) logs dates and times of shocks exceeding pre-set 2, 3, or 4 g threshold while also indicating what axis or axes in which shock is detected. Data, extracted using wireless USB-IRDA dongle and analyzed using MS Excel on PC, helps discover where, when, and who damaged shipment. Multi-event, reusable product has self-powered, 6-month battery life and is available with optional temperature and humidity data logging.

Eagle Thread Verifier    Sterling Heights, MI 48313
Jul 28, 2006 Featuring spindle with 24 lb-in. of torque, model HT-100 enables use of flexible chuck designed to check threaded holes not perpendicular to surface. With software within controller that operates spindle, system precisely checks depth of chamfer or counterbore. Capable of stopping production in seconds if anomaly is detected, it also checks thread for pitch diameter, proper depth, missing holes, broken tap, proper depth of pipe tapped holes, and external threads.

Cooper Power Tools    Lexington, SC 29071
Jul 28, 2006 Offered in 165 part types, Apex® u-Guard(TM) power tool sockets, extensions, and bit holders are encased in protective skin that prevents in-system damage such as chips, scratches, dents, and dings dealt to products during assembly. Each tool features free-spinning design that lets molded skin rotate independently of socket, bit, or extension spinning inside. This lets workers grip skin and avoid potentially harmful contact with contained tool.

Conbraco Industries, Inc.    Matthews, NC 28106 0247
Jul 28, 2006 Available in 7 sizes from 3/8-2 in. 83B and 86B Series full-port, 3-piece ball valves require minimal maintenance in harsh plant environments. They come in carbon steel, stainless steel, nickel, and other alloy body styles with threaded, socket weld, and buttweld end connections. Standard configuration includes RPTFE spiral wound body seals, enclosed stainless steel bolting, multi-piece V-ring PTFE packing, and unfilled FDA-compliant enhanced PTFE seats.

TE Connectivity Ltd.    Berwyn, PA 19312
Jul 28, 2006 Designed with 1-piece clamshell housing, CERTI-SEAL Closures are intended for direct buried splicing or demarcation of Series 59, 6, 7, and 11 coaxial cables as well as long-body F-81 sealed connectors. Featuring gel-filled construction, closures provide environmental seal that can withstand 14-day immersion without signal degradation. Units have operating range of -40 to +60°C and are designed to meet Telcordia specification TR-NWT-000975.