Ferrari Textiles Corp.    Pompano Beach, FL 33069
Nov 29, 2005 Suited for new buildings, renovations, or building extensions, Stamisol FT 371 is rated with M1, B1, and Euroclass Bs2d0 fire classifications and withstands temperatures from -22 to 158°F. Controlled biaxial weaving performed on polyester scrim during coating process ensures dimensional stability in warp and weft directions. Custom-fitted to specific structure, composite textile acts as insulating barrier in cold weather and provides protection from sun in warmer months.

GE Advanced Materials    Wilton, CT 06897
Nov 29, 2005 One-component Tufel I is suited for tubing applications such as catheters and IV lines, while 2-component Tufel III provides resilience and elastic memory in tubing for peristaltic pumps. Both platinum-cure, silicone elastomers are cured without peroxides that can product VOCs, and are compositionally compliant with FDA 21 CFR 177.2600 for indirect food contact. They can be sterilized using steam, gamma radiation, and EtO.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Nov 29, 2005 Available in red, red-orange, orange, amber, green, and blue, Series HSMx-A43xx Power PLCC-4 LEDs feature temperature range of -40 to +100°C and are targeted at automotive lighting and outdoor electronic signs and signals. To facilitate pick-and-place assembly, LEDs are packed in EIA-compliant tape and reel. Applications include turn signal lamps, brake lights, instrument clusters, traffic lights, marker lights, and signboards.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Nov 29, 2005 Featuring integral bearing, Series AEDA-3300 is available in resolutions from 600-4,096 cycles/revolution. Units operate at frequencies up to 1 MHz and temperatures from -40 to +125°C. Outputs are 2-channel quadrature with third gated index channel. Measuring 17 mm in diameter x 24 mm high, encoders include integrated RS-422 differential line driver and are suited for applications ranging from servo and stepper motors to robotic arms and wafer handling machines.

CommVault Systems, Inc.    Oceanport, NJ 07757-0900
Nov 29, 2005 Utilizing Unified Data Management(TM) architecture, QiNetix v6.1 integrates data protection with applications to optimize recovery time and recovery point objectives. ContinuousDataReplicator (CDR) software, suited for remote offices and data centers being consolidated for disaster recovery purposes, continuously captures changes in enterprise applications and remote office data. Platform shares job and media management, security, policy management, index, and browser interface.

Helmsman    Moscow 117535  Russian Federation
Nov 29, 2005 Print Maestro v2.5 enables users to print out file and folder lists in 7 preset standard modes and 5 multimedia modes, each with different attributes. Along with ability to export into HTML, PDF, or RTF, software offers data management and storage capabilities. Multi-frame window allows browsing through folders, sorting their content, and previewing printouts simultaneously. Folders appear on printouts as tree or list.

Shell Lubricants    Houston, TX 77002
Nov 29, 2005 Mineral-based Shell Omala, suited for highly loaded gearboxes operating under normal temperatures, exhibits water separation properties critical for operations in wet environments. Formulated for harsh industrial environments, Shell Omala HD synthetic oil is based on PAO and other select additives and exhibits thermal and oxidative stability. Synthetic Shell Tivela S is designed for enclosed, sealed-for-life or worm-helical gear units operating at higher temperatures.

FeinFocus USA, Inc.    Stamford, CT 06902
Nov 29, 2005 MicroXCT(TM) defect detection system scans packages in 3D at full resolution using non-destructive tomography to view structure. Multiple resolution modes allow user to switch from navigation at 30 µm to high-res defect localization and characterization at 1 µm. Tomography features virtual cross-section capability that images and constructs 3D volumetric dataset with up to 1,000 cross-sectional slices in 15 min. System is also targeted for semiconductor packaging industry.

Select-Arc, Inc.    Fort Loramie, OH 45845-0259
Nov 29, 2005 Facilitating vertical up and overhead welding, SelectAlloy 308L-AP features smooth arc transfer, quick freezing slag, and minimal convexity. SelectAlloy 309L-AP delivers optimal puddle control, slag freezing, slag release, and bead shape, while SelectAlloy 316L-AP offers resistance to intergranular corrosion due to carbide precipitation without adding stabilizers. Molybdenum helps provide creep resistance at elevated temperatures and resistance to pitting in halide environments.

Pass & Seymour/Legrand    Syracuse, NY 13221
Nov 28, 2005 Designed for use with ½ or 5/8 in. wallboard, 22.5 in.³ Steel and Wood Stud Boxes accept eleven No. 14, ten No. 12, and nine No. 10 wires. Bracket countersink allows for No. 8 wafer head or dry wall screws with minimal wallboard bow. Classified for 2 hr wall and ceiling fire resistance, products have Height Site alignment guide and box levelers. Wood Stud Box offers hands-free positioning with EZ Grip(TM), and box dimensions are 3.75 x 2.25 x 4 or 4.25 in.

FCI Electronics    Etters, PA 17319 9769
Nov 28, 2005 Vertical PCI Express(TM) Card-Edge Connectors support backplane designs based on System Host Board Express(TM) PCIe Specification. Connectors at interface between SHB and backplane are defined as x8 and x16 PCIe connectors. Backplane slots that interface with PCI Express peripherals can be supported with x1, x4, x8, or x16 PCIe connector links. Each serial PCIe lane is comprised of differential transmit and receive signal pairs that support 2.5 Gb/s data rate in each direction.

Heim Data Systems, Inc.    Belmar, NJ 07719
Nov 28, 2005 Featuring adaptable signal interfacing and interchangeable media cartridges, Model D7000 provides up to 256 Mbit/s total system data rate. Packet recording format ensures accurate data time tagging and consistent channel-to-channel phase relationships. Mainframe holds up to 4 multi-channel signal interface cards in any combination and includes GigE data download capability. With integral IRIG time code generator, unit can synchronize to external IRIG and GPS time sources.

Teknor Apex Co.    Pawtucket, RI 02861
Nov 28, 2005 Flexalloy® 9750 Series vinyl thermoplastic elastomers are formulated for applications where low-gloss surface may be aesthetically desirable. Anti-blocking properties facilitate handling of films such as bin liners, flexible accordion hose, and mating parts such as weather stripping for windows and doors. Available in Shore A hardness from 35-80, compounds offer resistance to oils and fat. Applications include appliances, construction, consumer products, and furniture.

MSA    Pittsburgh, PA 15230 0426
Nov 28, 2005 Hood-style Safe Escape(TM) Respirator enables users to escape from threatening situations by providing respiratory protection as well as head and neck protection from chemical, biological, radiological, and nuclear agents. Canister containing CBRN particulate filter and activated carbon is permanently bonded to respirator coupling nut. Inlet check valve optimizes filter performance, minimizes lens fogging, and reduces carbon dioxide buildup inside translucent hood.

Pilz Automation Safety L.P.    Canton, MI 48187
Nov 28, 2005 With PNOZ m2p base unit, multi-functional PNOZmulti monitors and provides diagnostics for all safety equipment on press brakes, eccentric presses, and hydraulic presses. All necessary safety and standard control functions are configured on PC using PNOZmulti Configurator program. Users can configure monitoring of operating modes as well as monitoring of safety light curtains in single-break or double-break mode. Same applies to monitoring camshaft with run monitoring.

Enna    Grand Island, NY 14072
Nov 28, 2005 SMED Quick Changeover Solution Package provides all materials and instructions necessary for companies to conduct 5-day training program that will lead to successful implementation of SMED (Single Minute Exchange of Die). With clear, step-by-step instructions, it shows users how to streamline changeovers. Package includes facilitator guide with digital media CD, preparation guide, workbooks, motion diagram forms, setup combination worksheets, forms, and Red Tag Register.

General Kinematics    Crystal Lake, IL 60014
Nov 28, 2005 VIBRA-DRUM® sand and casting processors are suited for high-volume mold/sand handling in foundry applications. In one continuous operation, this 2-mass system removes sand and tramp metal without damaging castings, reduces sand lumps to original grain size, and equalizes shakeout sand temperature. Non-rotating design features natural frequency vibration, high-frequency agitation, and 2-mass vibrating drums that deliver capacities to 400 TPH.

Physik Instrumente (PI)    Auburn, MA 01501
Nov 28, 2005 Featuring non-rotating tip, M-2x series motorized linear actuators are self-contained packages consisting of dc or stepping motor connected to ball screw or lead screw. They integrate non-contacting limit switches, homing sensors, and piezo-tip with 1 nm min incremental motion is optional. Suited for OEM and research applications, products provide design resolutions to 4 nm, pushing forces to 26 lb, and speeds to 2 ips. Maximum travel is 2 in.

Sensor Electronics Corp.    Minneapolis, MN 55436
Nov 28, 2005 Using LED to indicate increasing danger levels, controller displays digital readout of gas concentrations in PPM or percentage LEL ratios. It works with sensors that monitor ~100 toxic, flammable, or explosive gases. Sensor can be used in explosive or asphyxiating atmospheres while controller is located in safe area up to 3,000 ft away. Integral relays can trigger alarm lights and sirens as well as flash warnings to remote security offices.

Bentley Systems Inc.    Exton, PA 19341
Nov 28, 2005 Able to be applied to various subsystems, BIM-based Bentley Building Electrical Systems provides electrical system design and engineering, documentation, and management capabilities. It offers integrated schedules and reporting, automated drawing production and coordination, integration with analysis, and stepwise refinement of design process. Building information model can be created and manipulated in 2D or 3D model environment.