IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Dec 19, 2005 Equipped with USB Direct Port for PDF printing, Infoprint® 1532 Base Model (MT 4536) prints 1,200 x 1,200 dpi resolution monochrome text and graphics. I/O options enable scalable solution for SMBs, and printer adapts to existing infrastructures via 802.11 wireless feature. Combinations of 250-, 500-, and 2,000-sheet drawers, as well as multiple optional drawers, are supported. The 250-sheet duplex drawer offers 2-sided printing.

Linear Technology Corp.    Milpitas, CA 95035
Dec 19, 2005 Featuring complete photoflash capacitor charger and IGBT driver, LT3485-3, -0, -2, and -1 photoflash capacitor charger ICs operate from 1.8-10 V range and have primary current limits of 2, 1.4, 1, and 0.7 A respectively. Control technique allows series to use 5.8 x 5.8 x 3 mm transformers, and no external components are required to set output voltage. While charging, output proportional to capacitor voltage is available for monitoring. Average input current ranges from 225-700 mA.

Linear Technology Corp.    Milpitas, CA 95035
Dec 19, 2005 Featuring sampling rate of 105 MS/sec, 14-bit, dual ADC Model LTC2284 delivers flat SNR response of 72.2 dB up to 70 MHz as well as SFDR of 88 dB at baseband. Models LTC2280 and LTC2282 are 10-bit and 12-bit dual ADCs also with 105 MS/sec bandwidth sampling rate. Housed in 9 x 9 mm QFN package, all devices consume 270 mW per channel, with crosstalk between channels of -110 dB. They are optimized for undersampling rates up to 140 MHz and have analog input bandwidth of 575 MHz.

Linear Technology Corp.    Milpitas, CA 95035
Dec 19, 2005 Using constant frequency, current mode architecture, Model LTC3412A can deliver up to 3 A of continuous output current at voltages as low as 0.8 V from 4 x 4 mm QFN package. It operates from input voltage of 2.25-5.5 V, making it suited for single cell Li-Ion or NiMH applications. Synchronous buck regulator uses internal switches with RDS(ON) of 0.065 and 0.077 ohms to deliver efficiencies up to 95%. No load quiescent current is 64 µA, and less than 1µA in shutdown.

Baumüller Holding GmbH & Co. KG    Nürnberg D-90482  Germany
Dec 19, 2005 Featuring motor shaft power to housing volume ratio of 3.6 kW/dm³, size 7 b maXX can be extended in accordance with application requirements. Construction incorporates short conductor rails, water cooling system, and continuous platform. User can add new functionality to controller via plug-in modules, and all controllers in b maXX range are parameterized via WinBASS II. Product enables access to different bus systems in automation applications.

Baumüller Holding GmbH & Co. KG    Nürnberg D-90482  Germany
Dec 19, 2005 With stiff design suited for direct torque transfer, DSD 56...IPG incorporates planetary drive and dynamic servo motor for direct connection. Compact unit, suited for applications with maximum torque and dynamics requirements, does not require terminal connections or additional bearings. Self-cooling unit with fully encapsulated motor features continuous housing design, protected to IP65.

Baumüller Holding GmbH & Co. KG    Nürnberg D-90482  Germany
Dec 19, 2005 Offering alternative to IEC motors, DA 280 produces rated output to 450 kW. Air- and water-cooled versions are available that feature protection ratings of class IP23 and IP54 respectively. Compact unit is suited for use in plastics industry as well as general motion applications.

DzSoft Ltd    Kremenchuk 39605  Ukraine
Dec 19, 2005 PowerPoint Slide Show Converter v1.4 turns presentation created with Microsoft PowerPoint into self-running slide show that can be copied to any computer and will run on Windows 95, 98, Me, NT 4.0, 2000, XP, and 2003 without requiring additional program files or libraries. Program ensures that everyone who receives presentation via Internet or through CD-ROM is able to view it.

SKF USA, Inc.    Lansdale, PA 19446
Dec 19, 2005 Available with cylindrical or tapered bores from 5-30 mm, Self-aligning Ball Bearings allow for angular misalignment of shaft relative to housing without adversely affecting operation. Self-aligning capability is provided by 2 rows of balls with common sphere raceway in outer ring. Steel-reinforced rubber seals protect against contaminants during handling and operation. Sealed bearings are supplied with lithium base grease suited for operating temperatures from -22 to +230°F.

Smith Equipment    Watertown, SD 57201-5636
Dec 19, 2005 Engineered for demolition and metal scrapping applications, Gas Axe Oxy-Fuel Torch cuts steel up to 24 in. thick. It can be used with oxygen, acetylene, propane-based fuels, and Mapp or natural gas. Torch is available in 3, 4, 5, and 6 ft lengths and with various head angles. Graf-Tite seat material protects cutting tip from nicks and provides gas-tight seating, while heavy-duty manganese bronze head and tube supports resist warping.

Bystronic, Inc.    Hauppauge, NY 11788 3904
Dec 19, 2005 Bystar and Byspeed 5,200 and 4,000 W laser cutting systems utilize 2-stage controlled pulse piercing method that pierces through initial surface in stage 1 then switches to second stage where intensity of pulse is greatly intensified. Monitoring device determines when pierce-through has been achieved, and cutting motion is then initiated. Result is reduced heat input from smaller entry and elimination of material accumulation on surface of plate.

SiRF Technology, Inc.    San Jose, CA 95112
Dec 19, 2005 SiRFstarIIx chipsets are available in GSC2x, GSC2xr, and GSC2xrx versions that integrate RF and baseband into one package; models GSC2xr and GSC2xrx also eliminate need for external flash memory. Measuring 10 x 7 mm, single-chip solutions require 60 mW power for nominal operation and 25 mW for TricklePower operation. Internal software allows use of various configurations from blinking LEDs and varying baud rates and protocols.

SRC LLC    Orange, CA 92866
Dec 19, 2005 As desktop and Web-based solution, Portfolio(TM) v6.0, delivers real-time analysis and reporting capabilities refined for presenting information in dynamic, actionable, and usable manner via built-in Portfolio Composer(TM) reporting engine. It also comes with current year 2005 AGS demographics with 5-year projections through 2010 with MOSAIC® segmentation. Reports support direct output in variety of formats, which support inserting of charts, filtering, and sorting.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Dec 19, 2005 Optimized for lead-free manufacturing, package integrates Hysol® GR828H mold compound with Hysol QM1519 die attach adhesive for wire sweep properties and adhesive strength, respectively. Green solution, designed for 16- and 14-lead, Pb-free SOIC packages, uses Cu/Ni/Au leadframe. It achieves MRT reliability for MSL L1 up to 260°C, with no delamination at die top or at pad. High temperature storage is tolerated for up to 3,000 hr @ 210°C.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Dec 19, 2005 LANDesk(TM) Management Suite v8.6 for ThinkVantage(TM) Technologies service offerings aid in deployment, management, and training for LANDesk Management Suite v8.6 for ThinkVantage Technologies solution. Offerings provide Dedicated LANDesk Technical Account Manager (TAM), on-site professional services, and additional TAM on-site days. Deployment services and professional services are also provided for design, project management, knowledge transfer, and installation of LANDesk products.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Dec 19, 2005 As hub for authentication and authorization, Tivoli® Access Manager for e-business v6.0 centralizes security management and facilitates deployment of secure applications. Built to scale to hundreds of millions of users, program offers seamless management of applications through virtual hosting and transparent path options. It includes out-of-the-box reporting and consistent centralization of audit data through Common Auditing and Reporting Services component.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Dec 19, 2005 By enabling virtual date and time testing, IBM Application Time Facility for z/OS® v2.8.6 helps software development teams ensure software performs as intended. It provides testing at end-of-period, week, month, quarter, or year processing, or testing across midnight or any other critical time period. Program can shift time zones for online regions and restart failing job at date/time it failed, ensuring that file updates and reports are not affected.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Dec 19, 2005 WebSphere® Information Integrator Content Edition v8.3 delivers federated, bidirectional access within portals, workflow, and other enterprise applications to information stored in disparate content management systems. It makes multiple disparate repositories look and act as single unified repository, providing complete platform for deploying applications and workflows spanning multiple content sources. Software is built on standards based service oriented architecture.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Dec 19, 2005 Suited for SMBs, DB2® Content Manager Standard Edition v8.3 handles management, sharing, and delivery of digitized content. Product is designed for i5/OS(TM) environments running on iSeries(TM) servers and offers native eClient application server support under i5/OS. XML schema mapping utility enables automated XML document capture, and document routing capability with graphical workflow builder facilitates creation of business workflows.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Dec 19, 2005 IBM Rational® Functional Tester Extension for Terminal-based Applications v1.2 offers Eclipse plug-in designed as terminal emulator for hosting IBM zSeries® 3270 and IBM iSeries(TM) 5250 terminal-based applications. Program includes keyboard remapping of terminal sessions and support for character attribute testing as well as support for UNIX® VT100 terminal protocol and UNIX VT100 DBCS code pages.