Insource Spend Management Group    Hilliard, OH 43026
Jun 23, 2011 To identify most cost-effective parcel pricing targets for shippers, IDAS v3.0 features business objects dashboard and performs multi-dimensional data analysis of parcel freight spend across zones, vertical industries, geographic regions, and varying parcel shipping volumes. Features correspond with pertinent trends in parcel shipping marketplace, and analysis covers current contracts and pricing strategies in order to identify areas for savings.

PAS    Houston, TX 77062
Jun 23, 2011 Integrity iMOC ensures all changes made to plant's automation systems are detected and reconciled with specific management of change cases. Solution provides graphical environment for definition of MOC workflows, including descriptions of each state within workflows as well as checklists and required transitions for states. Program fully utilizes Integrity software, which maps configuration of 50+ different automation systems and tracks all changes to them.

Stackpole Electronics Inc.    Raleigh, NC 27604
Jun 23, 2011 Offering two 0201 size resistors in single chip array package, Model RAVF052D is available in values ranging from 3 W to 1 MW, with 5% tolerance. Device features power rating of 0.063 W at 70°C, maximum working voltage of 12.5 V, and maximum overload voltage of 25 V. Applications include memory modules, handheld scanners and barcode readers, base stations, wireless network equipment, and Bluetooth cordless devices.

Crouzet North America    Vista, CA 92081-8430
Jun 23, 2011 Complying with DIN 41 636-6 Form F, PBX Secure Safety Switches guarantee forced opening of NC contacts even in event of short circuit and/or welding due to overcurrent. Long overtravel actuator allows any tolerance deviations of sub-assembly in which switch is incorporated to be absorbed. Available in IP40 and IP67 rated versions, switches serve as auxiliary safety contacts for medium-voltage circuit breakers, motorized disconnect switches, and ground disconnect switches.

Fonderie Saguenay    Chicoutimi, QC G7H5G4  Canada
Jun 23, 2011 Providing fabrication of gray and ductile iron parts, Nopatech(TM) enables parts to be cast 1 or 2 weeks after reception of customer drawing. Nine axis robotic cell machines blank sand molds in sizes from 20 x 20 in. up to 115 x 115 in. It also produces cores, providing complete solution to wide variety of casting applications. Nopatech offers alternative to non-environmentally friendly polystyrene foam patterns and waste producing weldments.

Dynapar    Gurnee, IL 60031
Jun 23, 2011 RIM Tach 8500 is ruggedly designed with stainless steel sensor modules and ductile cast iron housing. Sensor module uses magnetic technology that delivers 70 thousandths air gap, promoting product reliability and application forgiveness, while axial play of up to 0.50 in. facilitates installation. Wheel design has metal edge guard that protects magnetic wheel material from accidental strikes and allows wheel to lock to shaft without shaft damage.

Bike Parking by Reliance Foundry    Surrey, BC V3S7G7  Canada
Jun 23, 2011 Offering mix-and-match features, Removable Bike Bollards allow for different site configurations from one event to another. Units are available with 2 bike bollard posts in 2 materials, 2 types of bike arm attachments, and 2 different in-ground receivers. Both post choices allow for reflective striping to be added for extra visibility. All steel bollards are available in 6 standard powder-coat finishes, with stainless steel options available.

Gold Medal Products Co.    Cincinnati, OH 45241
Jun 23, 2011 Designed for portability and to facilitate cleaning, No. 1886 Sno-Flake measures 22.8 x 20.2 x 10.3 in. and employs ¼ hp, 1,725 rpm motor to cut through ice. This UL- and Sanitation-Listed machine, which can be can be used for rentals, runs on 15 A plug and has LLDPE 3/16 in. thick cabinet that insulates ice for extended service capabilities.

Elma Electronic Inc.    Fremont, CA 94538
Jun 23, 2011 Designed to address compute-intensive requirements in command and control data center applications, ATCA7365 SystemPak combines multiprocessing of ATCA platform with ruggedized design capable of withstanding shock and vibration found in mobile transport applications. System features 3 ATCA processor blades, each with two 6-core Intel processors. Housed in 6U 6-slot ATCA chassis, SystemPak provides four 300 GB SAS drives, 10 GigE switching, 96 GB DDR memory per blade, and 1.2 TB storage.

E-Switch Inc.    Brooklyn Park, MN 55428 1514
Jun 22, 2011 Supplied with SPST, Off-On, momentary configuration, TL4100 and TL4105 series are suited for handheld devices and have life expectancy rating of up to 1,000,000 cycles. Max initial contact resistance is 100 mW for TL4100 and 1 W for TL4105, but both series feature 100 MW min insulation resistance at 500 Vdc, dielectric strength of 250 Vac for 1 min, and contact rating of 50 mA @ 12 Vdc. Operating range is -40 to +85°C, and travel varies from 0.15-0.10 mm.

APEM Components    Haverhill, MA 01835
Jun 22, 2011 Requiring only 2 wires, normally open prolonged pulse PBA switches can directly replace electromechanical switches in demanding environments such as medical, testing, and mining equipment; food preparation; and remote controls. PBA C function mimics behavior of standard switch; length of time for which actuator is pressed correlates diectly to length of output response (up to 20 sec). Sealed and washable, switches consume no power and use no external power source, ground, or power wires.

Acromag, Inc.    Wixom, MI 48393 7037
Jun 22, 2011 Used for high-speed processing of algorithms in embedded computing applications, VPX-SLX series employs configurable, logic-optimized XC6SLX150 Spartan-6 FPGA with 147,433 logic cells. PCIe interface, dual-ported memory, and 64 I/O lines or 32 LVDS lines direct to FPGA accelerate data processing and lend to versatility. While FPGA code loads from PCIe bus or on-board flash memory, JTAG and Xilinx ChipScope(TM) Pro interface are also supported to facilitate development.

J. W. Winco, Inc.    New Berlin, WI 53151
Jun 22, 2011 Series GN 473 Aluminum Two-Way Base Connector Clamps are RoHS compliant and available with ground matte or black anodized finish. In standard version, clamping force onto tube is achieved via socket cap screws. Cap screws are DIN 912, stainless steel, European Standard No. 1.4301 (American Standard Series 304), and kits are available that replace cap screws with adjustable levers. Those include lever, spacer bushing, and hex nut.

Monotype Imaging Inc.    Woburn, MA 01801
Jun 22, 2011 Fonts.com Web Fonts features 11,000+ Web fonts, including selections from 3 type foundries: Omnibus, Emboss Fonts, and Tour de Force Font. Additionally, Klint(TM) Rounded typeface from Linotype® Library as well as ITC® fonts featuring extended character sets are included for supporting multiple languages. Available through one of 3 subscription plans, solution enables thousands of fonts to be used in web page design, and typefaces are added at ongoing basis.

Phidgets, Inc.    Calgary, AB T2M3R7  Canada
Jun 22, 2011 Powered by external 9-28 Vdc power supply, PhidgetMotorControl 1065 lets user control direction, velocity, and acceleration of one DC motor. Unit provides continuous motor current of 5 A, update rate of 42 updates/sec, and response time of 30 msec. Motor PWM frequency varies with motor speed. Operating from 0-70°C, controller includes over-current, over-voltage, and over-temperature protection to ensure board and motor are not damaged.

Crystek Corp.    Fort Myers, FL 33907
Jun 22, 2011 Housed in 0.5 x 0.5 in. SMD package, Model CVCO55CC-3475-3475 features control voltage of 0.5-4.5 V, typical output power of +7 dBm, and typical phase noise of -115 dBc/Hz at 10 KHz offset. Input voltage is 8 V with max current consumption of 35 mA. Pulling and Pushing are minimized to 0.2 MHz and 0.2 MHz/V, respectively. Featuring second harmonic suppression of -15 dBc typical, VCO is suited for digital radio equipment, fixed wireless access, and satellite communications systems.

My Ladder Hand, LLC    Owensboro, KY 42303
Jun 22, 2011 Installed by hooking onto ladder rungs, My Ladder Hand provides 11 x 14 in. shelf on which to hold tools, materials, and supplies. Safety is increased by permitting OSHA-recommended 3-point-of-contact climbing and eliminating need to hold and balance working tools. Shelf also helps prevent dropped tools and eliminates need for multiple trips up/down ladder to retrieve tools. Ladder compatibility includes commercial extension ladders, multi-purpose ladders, small step ladders, and more.

Jackson Systems LLC    Indianapolis, IN 46203
Jun 22, 2011 Utilizing web-based dashboard for programming, monitoring and control, WEB Comfort(TM) enables multiple thermostats to be wirelessly networked throughout building or home. System provides individual temperature control coupled with intelligent energy management. Since thermostat is Internet-enabled, it can be accessed from anywhere in world via standard web browser.

Data Device Corp. (DDC)    Bohemia, NY 11716-2482
Jun 22, 2011 Total-ACE® consolidates protocol, memory, dual transceivers, and dual transformers within one plastic BGA package to simplify MIL-STD-1553 fabrication. Design collateral, provided to assist users in designing and developing their systems, includes ORCAD schematic symbol, thermal and IBIS models, and BGA user guide. Additional features for this DO-254 Certifiable product include SDK for Windows®, Linux®, and VxWorks® as well as BusTrACEr® software support for one-click C code generation.

Physik Instrumente (PI)    Auburn, MA 01501
Jun 22, 2011 Available in XY and XYZ models with 200 µm travel/axis, PInano(TM) Superresolution Microscope Stages feature direct-measuring capacitive sensors, which offer long-term stability and minimal sensitivity to noise due to high-frequency measurement principle. Bottom mount slide allows full turret rotation while protecting objectives. Additional features include ceramic encapsulated piezo drives and 24-bit controller with USB, Ethernet, and RS-232 interfaces.