Systron Donner Automotive Division    Concord, CA 94518-1399
Sep 06, 2006 Utilizing quartz MEMS technology, DIGI-Q(TM) offers single-axis, digital rate channel sensor solution that exhibits low noise, shock survivability, and bias stability over -54 to +71°C range. Sensor is suited for platform stabilization applications and utilizes Digital Signal Processing technology. Along with on-board microprocessor that compensates for errors, features include RS-232 or RS-422 compatible digital output and full scale range of ±1000º/sec.

Shockwatch    Dallas, TX 75247
Sep 06, 2006 EquipManager(TM) wirelessly monitors impacts, access, usage, and location of material handling equipment and fleet vehicles. OSHA and other safety regulatory compliance is ensured by onboard, customer-configurable, pre-shift safety checklist with audio/visual display that features full user menu and text messaging. Device allows for monitoring of multiple parameters such as fluid pressure, speed, lift count, and travel time through customizable digital and analog inputs.

Parker Hannifin Corp., Tube Fittings Div.    Columbus, OH 43228
Sep 06, 2006 Designed with sealing location positioned away from tip of male nose, Triple-Lok 37° flare female connection features dual angle seat that accepts 37° and 45° flare fittings. Sealing position tolerates surface imperfections at tip, helps protect nose during assembly, and prevents it from gouging female cone seat. Triple-Lok Swivel Connection can eliminate need for bulkier swivel fittings in order to meet higher pressure requirements.

Siemens Energy & Automation, Inc.    Alpharetta, GA 30005
Sep 06, 2006 Designed for industrial use on factory floor, Scalance(TM) W wireless LAN provides access points, client modules, and management tools. Device supports 802.11a, b, and g WLAN WiFi standards. For security, WPA and AES for 128-bit encryption are supported. Access points can be deployed as self-contained fat units, or in thin configuration, with access points working in conjunction with central controllers from numerous suppliers.

Regal Components, Inc.    Clearwater, FL 33762
Sep 06, 2006 Machined from H-13 hotwork die steel with 50-54 Rc blade hardness and annealed heads, US Standard Inch Ejector Blades range from .024-.078 in. thick and .100-.484 in. in width with tolerance of +.0000-.0003 in. Units come in 8 standard overall lengths from 5-10 3/8 in. Custom blades in variety of tool steels with corner radii, vents, head flats, and EDM shapes can also be provided.

Geerpres, Inc.    Muskegon, MI 49443
Sep 06, 2006 Geerpres Industrial Mopping System features heavy-duty, industrial chassis and two 8-gal galvanized metal buckets with brass drain valves. Welded construction and 6 in. industrial casters enable long-term use with low maintenance, and ergonomic wringer reduces risk of repetitive strain injuries. Optional upper pre-drain screen for preliminary liquid removal and bottom dirt screen for separating solid soil from mop water are available.

Innovative Picking Technologies, Inc.    Ixojnia, WI 53036
Sep 06, 2006 Laser-Pick(TM) utilizes high-intensity laser beams aimed at reflectors that visibly light up to direct pickers to pick/put locations. Green laser beam can service thousands of pick or put locations and can be utilized where pick-to-light cannot. Because laser beam guides picker, reflectors can be put anywhere without limitations of wiring runs. Supporting wireless, Ethernet, and RS-232 interfaces, Laser-Pick(TM) offers companion to voice recognition and RF Terminal based systems.

TE Connectivity Ltd.    Berwyn, PA 19312
Sep 06, 2006 Designed for use in highly polluted environments, high-voltage HVT-Z includes non-tracking tube and co-extruded stress control grading layer, which uses ceramic semi-conductor technology. Heat-shrinkable tubing conforms to many varying surfaces of termination and provides moisture sealing and stress control. Several configurations are available in voltage categories of 5-8 kV, 15 kV, and 25-35 kV. HVT-Z is fully qualified per IEEE-48, Class I terminations.

TE Connectivity Ltd.    Berwyn, PA 19312
Sep 06, 2006 Cosmic 927R Micro-Cable Stripper strips conductors from 36-10 AWG, and features controls allowing stripping diameters to be set in 0.1 mm increments. Machine is capable of stripping lengths from 1-25 mm, with partial lengths of 1 mm possible. Device features 1.5 sec maximum cycle time, and is suited for use with Teflon® insulation, rubber, and various wire and cable insulations and jackets.

ITW Automotive Finishing Group    Toledo, OH 43612
Sep 06, 2006 PulseTrack 2 continuously monitors and maintains programmable speeds of rotary atomizers while also monitoring temperature and humidity for one or more zones. Microprocessor-based system delivers magnetically generated pulse converted to fiber optic signal by module located in each connected rotator assembly. Along with built-in diagnostics and fault detection, product offers quick response with closed loop control and is adaptable to installation requirements.

Hilti Inc.    Tulsa, OK 74121
Sep 06, 2006 Weighing 17.4 lb, TE 76-P utilizes 1,400 W motor and incorporates internal theft-protection system. It has drilling range from ½-6 in. dia and works with selection of chisels. For additional control, product incorporates active torque control device, which constantly monitors tool rotation of tool and disengages drive system if it senses housing beginning to rotate quickly. Unit is capable of drilling into wood or steel, setting anchors, and mixing grouts.

Hilti Inc.    Tulsa, OK 74121
Sep 06, 2006 Featuring side handle with soft grip that absorbs 30% of vibration, 5 in. model DEG 500-D and 6 in. models DEG 600-D and DEG 600-P incorporate Smart Power(TM) system to minimize wear on 1,400 W motor. Low-profile gear case promotes access in tight areas, and, if power is interrupted, restart interlock helps prevent accidental starts. For operator protection, Active Torque Control function interrupts electrical current into tool to reduce unwanted kickback.

Elma Bustronic    Fremont, CA 94538
Sep 06, 2006 Featuring Single Star topology and 16-layer controlled-impedance stripline design, MicroTCA Backplane has modular architecture that supports redundant pods of AdvancedMC (AMC) modules. It provides 12 AMC slots, one power module slot, and one MicroTCA Controller Hub (MCH) slot in single width, full size format. Product allows single or redundant virtual carriers to provide power management, platform management, and fabric connections to modules.

Ebbco, Inc.    New Baltimore, MI 48047
Sep 06, 2006 Designed to extend coolant life, Sludge Masters Coolant Filter System is available in flush rates of 20-250 gpm, and combines circulation, filtration, and evacuation process into continuous coolant management system with few moving parts. Two-stage media-free filtration system can service one or more machines and offers 40-10 micron clarity, depending on application. Solids are collected into 55-gallon drum or hopper or optional bag filter.

Dialight Corp.    Farmingdale, NJ 07727
Sep 06, 2006 Designed to mount directly into industry-standard sockets for replacement of miniature incandescent lamps, variable input 586 VIP Series delivers 100,000 hr service life. LEDs utilize VIP technolgy to provide 6-36 Vdc variable operation with constant light output. Incorporating AlInGaP and InGaN technologies, RoHS-compliant units draw 10 mA and are available in red, green, yellow, blue, and white with intensities from 200 mcd for blue lamps to 1,500 mcd for green.

CIT Relay & Switch: Division of Circuit Interruption Technology, Inc.    Maple Grove, MN 55369
Sep 06, 2006 Offering 2 actuator options and 4 switch functions, BSR Series provides electrical ratings from 0.4 Va for dry circuit applications to 3 A for power applications in both SPDT and DPDT. Unit is available with silver-plated, gold-plated, and gold over silver plated contacts. Case and bushing are made of UL 94VO flame retardant material. Termination options include PC pin, horizontal-mount or vertical-mount right angle PC pin, and PC pin with support bracket.

THK America, Inc.    Schaumburg, IL 60173 5340
Sep 06, 2006 Solid Lubrication System S-Coating Series LM Guides are suited for use from atmospheric pressure to vacuum of 10^-6 Pa. Guide features adhesive-resistant and wear-resistant solid lubricant applied via deposition method optimized for circular arc contact structure.

Applied Measurements Limited    Aldermaston, Berkshire RG7 8PN  United Kingdom
Sep 06, 2006 Available with stroke lengths of 0-10 and 0-25 mm and overall accuracy of ±0.1%, AML/SGD Series strain gauge based displacement transducers are compatible with wide range of analog and digital monitoring and control and acquisition equipment. They require stabilized dc voltage excitation between 2-10 V and return high level mV signal proportional to position of plunger. Stainless steel tubular housing features spindle guide bearing and spring return mechanism.

Modern Process Equipment, Inc.    Chicago, IL 60623
Sep 06, 2006 With combination of teeth and interlocking grooves, Fractionizer(TM) is designed to cut material to uniform size with minimal fines. It delivers particle size uniformity and control by eliminating screens, attrition, and high speed impact. Applications include tea leaves, tobacco leaves, and spices.

Heyco Products    Toms River, NJ 08753
Sep 06, 2006 ERTB Terminal Blocks offer secure points of connection and transmission for incoming power line service to electrical equipment. Post-to-clamp style unitized blocks mount to any cabinet/housing attachment point. Single row, 3-wire pole design accommodates line voltage on 1 or 2 poles, handling neutral and ground wires on remaining poles. Blocks are made of impact-resistant polycarbonate with flammability classification of 94V-O and temperature rating of 125°C.