Dwyer Instruments, Inc.    Michigan City, IN 46361
Oct 03, 2006 In one enclosure with removable electrical terminal blocks, Series DHII Digihelic® II provides 4-20 mA process output, 2 SPDT relays with adjustable dead bands, and backlit LCD that can be programmed to read in pressure, velocity, or flow. Unit comes with Modbus® Communications and can be powered with 120/220 Vac or 24 Vdc. Menu key lets user select security level, set point, alarm, engineering units, and duct size. Control provides 0.5% FS accuracy on ranges from 0.25-100 in. wc.

Digital Monitoring Products    Springfield, MO 65803
Oct 03, 2006 Available in 4-, 2-, and 1-button versions, Series 1100 two-way wireless key fobs have 9 programming options and LED that immediately confirms whether system has been armed or disarmed, or that panic signal has been sent. Key fobs operate using 3.0 V universal Lithium coin-cell battery.

Varedan Technologies    Torrance, CA 90503
Oct 03, 2006 Series VMC-2000 full-length universal slot PCI motion control cards are available with 4 or 8 axes of motion. Each axis features quadrature encoder feedback inputs, optically isolated limit, amplifier fault, and home sensor inputs and amp enable output. Dual 12-bit D/As provide 16 channels of ±10 Vdc analog outputs for servo control or general-purpose use. Configurable RS-422 differential line drivers provide pulse and direction outputs and spare output for each axis.

TT electronics IRC Wirewound and Film Technologies Division    Boone, NC 28607
Oct 03, 2006 Featuring operating temperature range of -55°C to +155°C, PWC series pulse-withstanding chip resistors are available in 0805, 1206, 2010, and 2512 chip sizes. Resistors have power ratings of 125 mW, 330 mW, 750 mW, and 1.5 W, with maximum voltage ratings of 150 V, 200 V, 400 V, and 500 V, respectively. Resistance range is from 1.0 W to 10 MW, with tolerances from ±0.5% to ±5%. Absolute TCRs are ±100 ppm/°C at 10 W and higher and ±200 ppm/°C at less than 10 W.

HASCO Hasenclever GmbH + Co KG    Ludenscheid D-58513  Germany
Oct 03, 2006 Used in production of high quality tool and machine components, TOOLOX 33 and 44 steel grades can be gas-nitrided and PVD-coated. Available as P 1100 standard plate in milled and plough ground finish, TOOLOX 33 ESR quality tempered tool steel features 1040 N/mm² tensile strength, and is suitable for injection moulding tools. Pre-hardened to 45 HRC, TOOLOX 44 eliminates need for pre-machining and heat treatment.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Oct 03, 2006 Supporting standard-definition and high-definition SDI data transmission, Model LMH0056 multi-rate video reclocker automatically recovers data and clock signals from incoming SDI streams. Unit consumes 350 mW of power from single 3.3 V supply and operates at serial data rates of 143 and 270 Mbps, and 1.4835 and 1.485 Gbps. Available in 48-pin LLP® package, reclocker offers 0.6 unit intervals of jitter tolerance and supports DVB-ASI standard.

Lyndex-Nikken Inc.    Mundelein, IL 60060
Oct 03, 2006 Available in straight and offset units with internal/external coolant, AngleHeads feature precise bearing technology, lifetime lubrication, and labyrinth seals to protect bearings from dirt and coolant penetration. Concentricity and facing accuracy is less than 5 µ, and internal coolant supply is up to 70 bar. Units are offered in single- or multi-spindle types, as well as quick-change version.

Serac, Inc.    Carol Stream, IL 60188 2243
Oct 03, 2006 Facilitating aseptic packaging of milk and drinks in and around sterile enclosure, SAS 3 RABS (restricted access barrier system) isolator delivers up to 72 hr of non-stop production at fill rates up to 50,000 bottles/hr. Unidirectional airflow and overpressure provide protection against external contamination. Sterile area is surrounded by barrier zones that allow operator to access production area by use of glove-boxes to avoid contamination.

Klein Tools, Inc.    Lincolnshire, IL 60069
Oct 03, 2006 Available in straight and 45 and 90° bent nose styles, Long-Reach Long-Nose Pliers are hot riveted to offer smooth opening and closing action that eliminates handle wobble. Pliers are made from tool steel that is forged, precision machined, hardened, and tempered for strength. Knurled jaw design provides precise gripping, wrapping, and looping of wire, while plastic-dipped yellow handle provides comfort and easy identification.

Saelig Co., Inc.    Pittsford, NY 14534
Oct 03, 2006 Able to sense touch and near proximity through any kind of dielectric such as glass, plastic, stone, ceramic, or wood, Model QT100 single-channel sensing chip requires only 2 capacitors and resistor to complete sensor design. Sense electrode can be any conductive surface, and sensitivity can be is adjusted by changing capacitor values. RoHS compliant charge-transfer device operates from single 2-5 V supply and consumes 10 µA at 2 V in low power mode.

Amada Cutting Technologies Inc.    La Mirada, CA 90638
Oct 03, 2006 Metal cutting PCSAW700 features pulse drive motor that virtually eliminates vibrations created during longitudinal and penetration forces. This double pulse cutting technology helps maximize blade efficiency by reducing cutting resistance. With noise levels under 85 dB, machine has cutting capacity of 27.6 in. dia for round materials and 31.5 x 27.6 in. for rectangular materials.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Oct 03, 2006 MXA signal analysis platform allows flexible signal and spectrum analysis measurements for design and manufacture of wireless communication devices to current and emerging standards. Integrating range of standards-based measurements with 89601A vector signal analysis software, instrument makes all measurement features and functions accessible from front panel or via USB keyboard and mouse. Complete set of one-button power measurements comes standard.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Oct 03, 2006 Agilent MXG analog and vector signal generators feature adjacent channel leakage ratio performance of -65 dBc for 4-carrier 3GPP W-CDMA signal and -71 dBc for single-carrier signal. With SCPI programming, generators can make arbitrary switches in frequency and amplitude at less than or equal to 1.2 ms. In list mode, simultaneous switching of frequency, amplitude, and waveforms takes place at less than or equal to 900 µs. Simplified self-maintenance allows for in-house repair.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Oct 03, 2006 Suited for calibrating mobile phones in high-volume manufacturing, Agilent E6601A features built-in open Windows® XP PC that allows test programs to be developed, downloaded, and executed directly in system. Single-box, integrated test system offers connectivity via 100 based-T LAN, GPIB, and 6 USB 2.0 ports. Calibration applications for GSM/GPRS/EGPRS, WCDMA, and HSDPA provide scalable, multi-format capability with software upgrade. Fast Device Tune measurement is optional.

Creative Manager, Inc.    Lakewood, NJ 08701
Oct 03, 2006 Suited for creative design industry, Creative Manager Pro® v8.35 web-based software offers integrated project management and job tracking functionality. Capabilities include accounting, time tracking, invoicing, and media buying with Strata or SmartPlus. Along with user access security settings on custom report data sets, software offers users Transaction Preference function as well as costing, CRM, digital asset management, and Extranet capabilities.

KUKA Robotics Corp.    Clinton Township, MI 48036
Oct 03, 2006 Robots, which feature modular design that promotes application flexibility, are intended for laser welding, laser cutting, and measuring applications and can also be reconfigured for use in tasks such as adhesive application. Despite size and reach capabilities, each robot offers path repeatability of 0.1 mm. Models KUKA KR 100 HA, KUKA KR 100 L90 HA, and KUKA KR 100 L80 HA offer respective reaches of 2,600, 2,800, and 3,000 mm with payload capacities of 100, 90, and 80 kg.

Data Fields Manager    San Jose, CA 95050
Oct 03, 2006 Data Fields Manager for Outlook enables users to manage standard and user-defined fields in Outlook. Used for mass modification on Outlook Contact folder, software offers functionality for users to perform multi-contact data operations such as copy, paste, capitalize, find and replace, as well as trim on particular field. Other capabilities include renaming Outlook User Defined Fields, copying data to another field, and creating new set of fields.

Alcan Aluminum Corp., Alcan Cable Div.    Atlanta, GA 30346
Oct 03, 2006 Designed for commercial construction market applications, MODEX(TM) pre-fabricated modular wiring systems eliminate need for assembly of components at job site. Assemblies are delivered in pre-packaged units when needed, eliminating handling. UL and C-UL listed, systems comply with National Electrical Code and Canadian Electrical Code requirements.

InterTech Development Co.    Skokie, IL 60077 3220
Oct 03, 2006 Able to achieve accuracy of ±2% of reading or 0.02 sccm (standard cubic centimeters per minute), CalVal(TM) helps manufacturers maintain quality standards without slowing production line output for mechanical calibration. No operator judgment is required, and calibration process is automatic. Failsafe, self-calibrating, electronically controlled standard ensures vendors meet 6 Sigma quality requirements and deliver only acceptable parts to customers.

Infotecs GmbH    Potsdam 14469  Germany
Oct 03, 2006 Supporting Microsoft Windows Mobile v5.0, ViPNet Safe Disk Mobile 1.2 provides management and secure storage of all sensitive data on PDA. Data is encrypted and password-protected, even when device is switched off or in standby mode. Users can open and edit any file from secure folder in word processor or other application. Files are automatically decrypted when opened and encrypted when saved.