Ramtron International Corp.    Colorado Springs, CO 80921
Sep 19, 2006 Intended for applications that require high capacity data collection, such as utility metering, Model FM24C512 features 2-wire serial interface that is pin-compatible with industry standard 24C512 EEPROMs. It performs reads and writes at bus speeds up to 1 MHz, and operates from 5 V power supply, drawing 250 µA for reads and writing at 100 kHz. Housed in 8-pin EIAJ SOIC package, device offers 45 years of data retention and is rated from -40 to +85°C.

Mate Precision Tooling    Anoka, MN 55303
Sep 19, 2006 Featuring multiple user-specified grinding programs, MPG Grinders allow for material removal in increments as small as .0002 in. to provide precise sharpening while avoiding overgrinding. One version allows manual adjustment of grinding wheel relative to top of tool component, while other version features laser sensor to automatically detect wheel position relative to tool. Both have fully enclosed work area and are equipped with CBN grinding wheel.

Flowserve Corp.    Irving, TX 75039
Sep 19, 2006 ValveAnalysis(TM) lets AMS(TM) asset management tool suite users run diagnostic signatures for Flowserve valves, actuators, and positioners, providing key information to maximize equipment performance. Offered as plug-in, software adds informative diagnostic signatures to calibration and alarm functions in AMS. It does not bypass AMS, ensuring complete device history is always maintained, and does not duplicate any of its functionality.

Mayfran International    Cleveland, OH 44143-0038
Sep 19, 2006 ConSep single-platform chip conveyor/coolant separator removes chips and contaminates to 50 microns in size. Separator has internal chip handling (auger) system, which also handles fines and sediment, and backwash that automatically cycles to indexing filter drum's poly fiber media, making unit maintenance free. Clear access panel enables visual inspection of cleaning process, and filtered coolant is held in holding tank for return to machine tool.

Mayfran International    Cleveland, OH 44143-0038
Sep 19, 2006 Mounted to machine coolant tank, Coolant Control Center (CCC) provides continuous real time in-line monitoring of coolant, measuring coolant concentration, PH, conductivity, temperature, and volume. System features PLC for coolant correction and programming routines for precise maintenance of machining fluids. Measuring 16.92 x 38.89 x 11.92 in., CCC has ¾ in. water inlet union and works with 220 V 2-phase electric connector or 400 V 3-phase power hookup.

Mayfran International    Cleveland, OH 44143-0038
Sep 19, 2006 Installed on floor or as pit mount and using single pump, VacuFilter(TM) coolant cleaning system works with single machine tools or multiple machines. Contaminated fluids are drawn through filter media supported by septum plate to catch solids, which are pulled away for disposal by drag conveyor. Media is selected based on fluid type, workpiece materials, and process/particulate form. Indexing of media is actuated automatically via sensor monitoring vacuum box pressure.

ROMI Machine Tools, Ltd.    Erlanger, KY 41018
Sep 19, 2006 Featuring 50 x 24 x 25.2 in. work envelope and 52 x 22 in. work surface, D1250 vertical machining center offers traverse rates of 1,181 ipm (X-,Y-, and Z-axis) mean accelerated machine cycle times. Automatic tool changer with bi-directional selection mode offers 22-tool capacity and 5.5 sec station-to-station index time. Belt-driven heavy-duty cartridge-style headstock features 20 hp ac high-precision spindle motor with infinitely variable drive.

Georgia Case Co.    Tucker, GA 30084
Sep 19, 2006 Accommodating any size flat plasma or LCD from 37-60 in., Plasma Electric Lift Case helps eliminate threat of damage due to set up. Lift mechanism extends 7 ft, to which 3 ft can be added. Cable management system hides cords and makes connections unobtrusive. With lift, 42 in. screen raises to full extension in 16 seconds and 50 in. unit raises in 22 seconds. Remote control can be used from over 100 ft away and works on secure radio frequency.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Sep 19, 2006 Series MINEG Gages feature dual psi and Bar scales with red, green, and yellow zones on 2 in. dials. Silicone-filled gages have brass sockets and Phosphor Bronze Bourdon tubes, and can withstand ambient temperatures of 30-160°F. Hydraulic quick-connect connection with Buna O-ring and fluoroelastomer washer suits gage for roof support shields on hydraulic mining systems.

Pro-Lite, Inc.    Costa Mesa, CA 92626
Sep 19, 2006 Displaying text horizontally or vertically, Banner-Lite(TM) electronic banner includes 9 brightness settings, message scheduling, and auto time/date. Banner features 7.87-18.89 in. character/display area heights, 39.37-99.21 in. display widths, 344-724 ft viewing distances, and .49-1.18 mm pitches. With 345 pre-programmed animated graphics, 38 character functions, and 32 different character effects, banners can display in English, Japanese, and Korean.

Mocon    Minneapolis, MN 55428
Sep 19, 2006 In one analysis, PAC CHECK® Model 840 lets packagers measure 2 critical variables - residual headspace oxygen (O2) and absolute package leak rate - that determine package shelf-life. Unit produces absolute leak number based on application of Poiseuille's law, which yields total hole diameter leak size based on measurements of pressure and flow. It saves up to 240 data points in internal memory and can also send information to computer via RS-232 data line.

Mikron    Lincolnshire, IL 60060-4224
Sep 19, 2006 Designed for high-speed machining of workpieces up to 2,200 lb, Model HSM 800 ProdMod offers 24/7 unmanned operation. Model HSM 600U ProdMod provides simultaneous 5-axis machining of large workpieces in high-speed mode. Tool tower is constructed with circular suspended shelf offering 120, 170, and 220 tool positions, cutting changeover time to less than 2 sec. Available with various clamping systems, machines offer intelligent automation with pallet tables, instead of T-slot tables.

Pillar Technologies    Hartland, WI 53029
Sep 19, 2006 Measuring 13 x 10 x 4 in., waterless Handheld Induction Sealer applies foil barrier or protective seal, promoting tamper-evidence, leak prevention, and shelf-life extension. It is available in 120 or 240 V operation with full adjustment of time in .1 sec increments up to 10 sec. Coil design allows sealing of virtually all cap styles and diameters. Portable, lightweight unit features solid state construction and is stability tested and certified.

MGR Industries, Inc.    Fort Collins, CO 80524 8457
Sep 19, 2006 Designed to withstand public use, vandal abuse, harsh weather, and environments where fluids are common, QVP keyboard is sealed to IP65 and can be spray washed. Engraved key tops promote key life and tactile feel. Featuring customizable key graphics, product can sit on desktop or be under-panel mounted. It operates in temperatures from -20 to +60°C and is USB 2.0- or PS2-capable. Bezel color can be customized by powder coating to desired shade.

HDK America, Inc.    Barrington, IL 60010
Sep 19, 2006 Measuring 3 x 3 x 1 mm with ±2 G acceleration, 3-axis Model HAAM-325B is based on silicon substrate and fabricated using micro-machining MEMS technology. Piezo-resistive unit can detect minute amounts of 3-axis dynamic acceleration in X, Y, and Z axis, and output tilt and gravitational acceleration data simultaneously. Two separate terminals of interrupt output for drop detection and shock detection are provided, in addition to conventional standby terminal.

Technical Consumer Products, Inc.    Aurora, OH 44202
Sep 19, 2006 Offered as alternative to HID and incandescent systems in high bay and open ceiling applications, linear fluorescent lighting products offer solution for switching, dimming, and emergency lighting. They offer light uniformity and are rated for 24,000 hr lamp life. Stay Light feature ensures that if one lamp goes out, remaining lamps stay lit. Products are designed for suspended, pendant, or surface mounting.

SLI Lighting    Mullins, SC 29574
Sep 19, 2006 Pulse Start Metal Halides, available in 175, 250, 320, 400, and 1,000 W models, have CRI of 65. Depending on model, offered color temperatures include 3800K, 4000K, and 4300K, and lifetime ratings include 15,000 or 20,000 hr. Protected Metal Halides, available in 400 and 1,000 W models, feature respective color temperatures of 3600K and 3500K and rated lifetimes of 20,000 and 15,000 hr. Both wattages have CRI of 65.

Hubbell Inc. (Delaware) / Wiring Device-Kellems Division    Milford, CT 06460
Sep 19, 2006 Made from polycarbonate material, Non-Metallic In-Use Weatherproof Covers have modular design that accommodates multiple configurations. Units comply with requirements of NEC Article 406.8 in all wet locations for 15 and 20 A, 125-250 V applications.

PulseTech Products Corporation    Southlake, TX 76092
Sep 19, 2006 Offered in 2, 5, and 6 W models, SolarPulse® provides clean, quiet energy to all types of lead-acid batteries. Solar-powered device simultaneously emits constant electronic DC pulse that removes lead sulfate deposits on battery plates and returns them to battery acid as active electrolyte. Suited for vehicles and equipment in areas without access to electrical power, low-profile, industrial-strength solar panel mounts flat with no frame required.

New England Fuel Institute    Watertown, MA 02472
Sep 19, 2006 Measuring 3.75 x 3.25 in., UV-resistant Kerosene Decals are placed on pumps to indicate sulfur content. Self-adhesive, overlaminated labels are available in 5 different types for various levels of sulfur content and whether fuel is taxed or non-taxed. Guidance document explaining details of EPA regulation and proper placement of decals is included with each order.