Advantech Automation Corp.    Cincinnati, OH 45240
Oct 09, 2006 Universal PC-bus card, Model PCI-1735U, features 32 TTL-level digital input channels, 32 TTL-level digital output channels, and three 16-bit programmable counter/timer channels. Digital I/O channels use driver/buffer circuits to provide output driving capacity. Card offers low-input loading, user-configurable clock source, and full selection of wiring and signal interface boards.

Valenite, LLC    Madison Heights, MI 48071 9636
Oct 09, 2006 Designed for reaming, fine boring, and milling, MODCO® Tipped Tools can be engineered with steel or carbide bodies and are provided in any required diameter and length combination. PCD tips are available for aluminum and other non-ferrous material applications, while CBN tips are offered for iron jobs. Construction technique allows tools to be engineered with appropriate number of tips to achieve required part dimensions, surface finish, and geometric relationships.

Clippard Instrument Laboratory, Inc.    Cincinnati, OH 45239
Oct 09, 2006 Offered in sizes from No. 10-32 thread to ½ in. NPT, Maximatic® valves may be configured as 3- or 4-way, single- or double-solenoids. Available pressure ranges vary from 0-150 psig, depending on valve and model. Products are offered with various mounting options and provide multiple possibilities for users in packaging industry, assembly, and manufacturing applications or any pneumatic application.

North Atlantic Industries, Inc.    Bohemia, NY 11716
Oct 09, 2006 Operating over 360 Hz to 10 kHz frequency range, DSP-based 73LD4 includes 6 independent, transformer-isolated, programmable LVDT/RVDT tracking converter measurement channels. Each channel offers 16-bit resolution, ±0.025% FS accuracy, digital velocity output, incremental encoder (A+B) outputs, and wrap-around self-test. Product also includes 16 programmable DIO channels, latch feature for reading all channels simultaneously, and optional programmable excitation reference supply.

Aremco Products, Inc.    Valley Cottage, NY 10989
Oct 09, 2006 Aremco-Seal(TM) 617 is used to produce hermetic seals in porous ceramics and refractories in electrical and high-vacuum applications. Single-part, water-based glass coating, applied by dipping, brushing, or spraying, cleans up prior to curing with warm water. Curing is accomplished by setting at room temperature for 30 min and then heating to 1,600°F for 30 min. Odorless product contains no VOCs, and no outgassing will occur upon curing or during operation.

BI Technologies Corp.    Fullerton, CA 92835-1051
Oct 09, 2006 Housed in TO-263 package suited for high-density PCB installation, non-inductive Series SMHP features resistance range from 0.01-220 W and TCRs from 50-250 ppm/°C, with tolerances of ±5% and ±1%. Max operating voltage is 500 V, and thermal resistance is 3.3°C/W from resistor's hot spot to package's metal flange. Since design provides complete thermal flow, resistors are suited for automotive electronics, switchmode power supplies, and pulse handling circuits.

FCI    Etters, PA 17319
Oct 09, 2006 Based on Canstar(TM) technology, FCI Fiber Optics product line is comprised of fiber optic multimode/single-mode couplers, splitters, taps, wavelength division multiplexers (WDMs), cable assemblies, and adaptors. Couplers are offered for various design specifications, including one-in, many-out couplers; WDMs; and one-in, 2-out couplers available as even- or ratio-split. FCI attenuators, or one-in, one-out couplers for attenuating all wavelengths, are also available.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
Oct 09, 2006 Waterproof, NEMA4x-rated Model IQ160 measures pH, mV, temperature, and ORP. It features automatic or manual temperature compensation, automatic buffer recognition of 7 buffers, and up to 3-point calibration. Stainless steel pH probe has virtually unbreakable sensor that stores dry and needs no maintenance. Providing multi-parameter capabilities, Model IQ170 has all features of IQ160, plus ability to measure conductivity, TDS, and salinity.

MPS Industries    Gardena, CA 90248
Oct 09, 2006 Suited for CATV/Broadband/RF applications, standard and custom products include Balun transformer and double balanced mixer, RF and wideband isolation transformer/mixer, directional coupler/splitter, and power RF chokes to over 800 MHz. They perform over industrial temperature ranges, with bandwidth from 100 kHz to 2 GHz. Packages vary from 3.8 x 3.8 mm with 1.25 mm pins spacing to 6.5 x 7.2 mm with 2.54 mm pins spacing, from gold plated ceramic base to LCP header.

Jergens, Inc.    Cleveland, OH 44110
Oct 09, 2006 Made of one integral piece of steel, Solid Drive® Spring Plungers incorporate hex drive, plunger, and body. Units feature through-hardened steel tips and solid drive design that eliminates need for set screw. Shortie Spring Plungers have same features, but have screwdriver slot instead of hex drive. All Spring Plungers come in low carbon steel or stainless steel with Delrin, low carbon steel, or stainless tips and black oxide finish.

Weldcraft    Appleton, WI 54911
Oct 09, 2006 Four air-cooled TIG torch packages are available with rubber cables for applications from 150-200 A, while 2 water-cooled TIG torch packages are offered for applications up to 250 or 350 A. Each package contains 25 ft power cable and cable cover, power cable adapter, and 15 ft ground cable. Water and gas hoses are also provided, as required, along with Smith Equipment flow meter regulator and welding accessory kit with nozzles, collets, collet bodies, and tungsten.

Novatec, Inc.    Baltimore, MD 21225
Oct 09, 2006 Capable of throughputs from 100-400 lb/hr, NovaWheel(TM) rotating wheel dryer continuously puts dry desiccant into service while regenerating saturated desiccant in same rotational cycle. Use of steel link drive chain to drive desiccant wheel minimizes dew point variation. Cylindrical wheel contains desiccant-impregnated honeycomb divided into 3 sections for moisture removal, purge, and regeneration. Rotor turns counter-clockwise, moving each segment of honeycomb through 3 stages.

Watson-Marlow Bredel Pumps    Wilmington, MA 01887
Oct 09, 2006 Suited for transfer of corrosive solids and particle-laden liquids in media mill applications, SPX accommodates flows from 0.1 µL to 350 gpm and withstands pressures to 232 psi. It has no moving parts in product zone, and pump rotor never comes in contact with slurry. Hose technology enables SPX to generate 30 ft suction lift and pump viscous chemicals and slurries without affecting pump life. Self-priming product is reversible and can run dry, indefinitely, without damage.

austriamicrosystems AG    Premstatten   Austria
Oct 09, 2006 Eight-channel AS1109 uses serial data I/O lines for error information readback; no additional PCB tracks are needed for open and shorted LED error diagnostics. Built-in LED error detection can be invoked during normal operation without switching into separate detection mode. Currents, adjustable from 0.5-100 m, control LED brightness with ±2% output accuracy. Low-Current Diagnostic mode applies 0.6 A test current to display for short time, making LED testing invisible.

AERCO International, Inc.    Northvale, NJ 07647
Oct 09, 2006 With operating range of 200,000 to 3 million BTU/hr, Benchmark 3.0 Low NOx (BMK 3.0LN) boiler features stainless steel, heat exchanger design and incorporates C-More(TM) unit controller. Integral air/fuel delivery system enables boiler to achieve 15:1 turndown, optimizing operating efficiency and seasonal fuel conservation. Achieving 99.1% efficiency at lowest firing rate, condensing full modulation boiler matches fluctuating loads to minimize cycling and eliminate temperature overshoot.

Phoenix Contact    Harrisburg, PA 17111 0100
Oct 09, 2006 Available in screw, spring, or IDC (insulation displacement connection) technologies, COMBI plug connectors plug into DIN-mounted pluggable terminal blocks, and use same plug-in zones for all basic blocks. Standard plugs (UP, SP, QP) feature wire exit on top, while plugs with screw and spring-cage technology (UPBV, SPV) have side wire exit. Units are available in pre-assembled position sizes or individually for self-assembly.

ESAB Welding & Cutting Products    Florence, SC 29501
Oct 09, 2006 Weighing just 16 lb, HandyPlasma 250 cuts up to ¼ in. carbon or stainless steel and is portable enough to travel to any job site. Single-phase unit produces 20 A at 20% duty cycle and comes complete with torch, spare parts, air filter/regulator, input power cord with plug, and work cable with clamp. Additional features include side-mounted pressure gauge and automatic air purge when unit powers on.

Innovative Picking Technologies, Inc.    Ixojnia, WI 53036
Oct 09, 2006 Combining task complete button and indicator, PICK-MAX² provides 1-touch, 1-glance operation. Sense-ME(TM) hand sensor validates picks from pick face and eliminates need to press button after each pick/put. Indicator light has 5 colors, allowing multiple pickers per zone, batch pick, etc. Three conductor BUS is integrated into plastic extrusion to mount to flow rack or static shelving. Teamed with Watch-Me(TM) system, PICK-MAX² lets pickers work in zoned or zoneless mode.

Daewoo Heavy Industries America Corporation    Warrensville Heights, OH 44128
Oct 09, 2006 With 30 hp motor generating 161 ft-lb torque for cutting metals, DHP-4000 combines 1.5 sec tool-to-tool changes, 2,362 ipm rapid traverses, and 2-pallet, rotary shuttle system with 5.9 sec pallet change time. Work pieces up to 23.6 in. dia x 31.5 in., weighing up to 880 lb., are supported on 15.7 x 15.7 in. pallets. Table can be indexed in 1° increments, and 60 station ATC automatically returns CAT40 tools to original pots.

Daewoo Heavy Industries America Corporation    Warrensville Heights, OH 44128
Oct 09, 2006 PUMA TL-series features upper and lower turrets and programmable tailstock for parts 9.4 in. dia x 23.6 in. long. While model TL2000 accepts 2.6 in. dia barstock, TL2500 accepts barstock of similar or 3.0 in. dia and 39.3 in. lengths. Both models are designed for interrupted cutting. Their dual turrets house 20 tools total, with live tooling at any station, and servo drives reduce station-to-station times to 0.10 sec. Centers also feature 945 ipm Z-axis rapid traverse.