Unifin International, Inc.    London, ON N6A4P4
Sep 29, 2006 Designed with plate fin technology, RCP(TM) Coolers remove heat from electrical generators. Removable, bolt-on cover plate facilitates access for cleaning while keeping cooler installed, without disturbing piping. Leak detector configuration is available to prevent catastrophic failure of motor or generator. Coolers are suited for new and existing power generation installations, from nuclear and hydro-electric to gas turbine power.

Snap-On Tools, Inc.    Kenosha, WI 53143
Sep 29, 2006 Measuring 24 in. deep and 72 in. wide, Classic 96 cabinet offers 31,000 cu-in. of storage space. Unit's 18 drawers can be configured to almost any specification, with 2 in. mounting centers located throughout. Each drawer is trimmed in aluminum and equipped with full-width ¾ in. pulls. Each corner of cabinet is reinforced by 14-gauge steel gussets to provide durability. Cabinet includes corrosion-resistant locking system and comes in variety of scratch-resistant colors.

SolidWorks Corp.    Concord, MA 01742
Sep 29, 2006 SolidWorks® eDrawings® Professional lets users generate accurate representations of 2D and 3D product designs that anyone can view, mark up, and measure. Email-based collaboration tool includes ability to drag and drop models directly into Microsoft® Office files while preserving full interactivity. Along with publishing/viewing support for AutoCAD® 2007 drawings, 3D files, and layers, software lets users interact with files created in Google SketchUp® software.

efi Polymers    Denver, CO 80216
Sep 29, 2006 Offering 1,000 cp mixed viscosity, 20206/50013 Electrical Potting System is used for automated encapsulation of motors and electronic parts. Thermally-conductive epoxy cures at room temperature with cure cycles of 24 hr at 77°F or 4 hr at 150°F, has gel time of less than 5 hr at 77°F or 45 minutes at 120°F, and working time of 150 minutes at 77°F. UL 1446 recognized potting compound features volume resistivity of 2.8 x 1015 W-cm and dielectric strength of 456 V/mil.

VisiWear    Bergen   Norway
Sep 29, 2006 Including advanced wireless security and encryption features, Model EX-AP-A EX certified access point helps create wireless infrastructure in EX/hazardous areas, ATEX zone 1, and can be configured as mesh endpoint and standalone access point. Integrated EX-ANT-B wide angle beam antennas connect with up to 30 m of cable without significant signal loss, and only one cable is needed to connect to network containing power lines and Ethernet (POE).

Allegro MicroSystems Inc.    Worcester, MA 01615
Sep 29, 2006 With low EMI noise characteristics at more than 2 MHz, STR-W67xx series of low-power off-line SMPS primary regulators includes quasi-resonant topology ICs, and enables output powers up to 160 W at 120 Vac, or 240 W at 230 Vac input. Soft switching mechanism turns on internal MOSFET at close point to VDS bottom point, while bottom-skip function skips first bottom of VDS and turns on MOSFET at second bottom point to minimize increase of operational frequency at light output load.

Temex Time    Oxnard   Switzerland
Sep 29, 2006 Compatible with Cenelec EN16769 and multi-dwelling unit standard, SAW filters include balun function and accommodate up to 12 users on single cable. SAW technology enables LNB architecture to simplify Ku band section (single DRO instead of pair) and switching matrix (2 x 4 instead of 4 x 4). RoHS compliant filters come in 0.1 x 0.1 in. hermetically sealed ceramic package and have passivation coating on top of electrodes.

Portescap S.A.      Switzerland
Sep 29, 2006 Model h3 Stepper Motors feature aluminum housing that provides heat dissipation and neodymium iron boron magnets that help optimize torque density, while bearing retainer and o-ring help reduce motor noise. Bearings enable 1.8-degree step motors to handle high side and radial loads. Motors come in NEMA 17, 23, and 34 frame sizes with various stack lengths, and windings can be customized to suit individual application needs.

Contrinex AG    Old Saybrook, CT 06475
Sep 29, 2006 Sealed to IP67 to withstand weld spatter and resist electromagnetic field interference, Teflon® coated weld immune sensors feature copper-zinc alloy bodies. Available in M12, M18, M30, and 40 x 40 mm cubic (C44) formats, flush-mountable sensors come with normally open output and are fitted with 3-pin M12 connector. CE approved products have sensing distance from 3 mm with M12 up to 15 mm with C44, and are short-circuit, voltage reversal, and induction overload protected.

Advanced Interconnections Corp.    West Warwick, RI 02893
Sep 29, 2006 Suitable for 1.27 mm pitch surface mount board stacking applications, B2B® High Density SMT Connectors employ screw-machined terminals with multi-finger contacts and solder ball terminal design. They offer over 400 contacts/in.² and are provided with pick-up caps (male) or polyimide dots (female) to facilitate automated pick-and-place. Polarized male and female engagement prevents 180° out-of-orientation mismating, and standard mated heights range from 6.00-12.70 mm.

Bishop-Wisecarver Corporation    Pittsburg, CA 94565 0209
Sep 29, 2006 Available in belt and ball screw driven versions, Model SRX-150 aluminum profile linear actuator offers speeds up to 5 m/s. Features include NSK K1 lubrication units, high energy absorbing bumpers to prevent damage from accidental crashes, and SS sealing strip to protect linear guides and ball screws from particulate ingress. With zero backlash and long stroke operation, heavy duty actuator is suited for high load gantry systems and heavy transfer equipment.

W. L. Gore & Associates, Inc.    Elkton,, MD 21921
Sep 29, 2006 Designed for aerospace market, impedance-matched Quadrax interconnects provide signal fidelity and are optimized for high data rate requirements by controlling impedance and minimizing jitter. Products include integrated alignment feature that prevents bending of pins in field, which eliminates tolerance and positioning issues associated with scaling down military connectors to increase density.

Seavus USA, Inc.    Andover, MA 01810
Sep 29, 2006 Used for opening and printing Microsoft Project® plans (.mpp files), Seavus Project Viewer is designed with Microsoft Project® look and feel. Standalone desktop application includes Microsoft Outlook plug-in that provides users with consolidated view of project tasks and control over progress of each project. Microsoft Excel plug-in allows users to import project plan information in .xls format.

Mate Precision Tooling    Anoka, MN 55303
Sep 29, 2006 MXC(TM) tooling system consists of punches, strippers, and Slug Free® dies for ½ in. A, 1¼ in. B, 2 in. C, 3½ in. D, and 4¼ in. E thick turret stations. Manufactured of DuraSteel(TM), MXC Punches feature minute back taper with near polished punch flanks to reduce friction and heat build-up during punching cycle. MXC Strippers, manufactured of 4150 tool steel, are designed with round edges to eliminate sheet marking, while Slug Free® Die design eliminates slug pulling.

Bradman-Lake, Inc.    Charlotte, NC 28273
Sep 29, 2006 Featuring 3 head vacuum carton feeder and long carton magazine with motorized hopper, Model SL903 has running speed of up to 130 cartons/min. It handles large pack size range and accommodates size changing. Handwheels adjust carton flight chains and pockets of infeed conveyor. Automatic end-load machine is constructed of stainless steel with machine guards designed for access and visibility.

FCI Electronics    Etters, PA 17319 9769
Sep 29, 2006 Eliminating need for independent power supply on peripheral devices, Latch-n-Lok(TM) System for USB+Power combines standard USB contacts with other power contacts to provide additional 5 A of current-carrying capacity beyond standard 1 A from traditional USB. Available with varying color and mechanical keying to denote voltage levels of 5, 12, and 24 V, shielded, latching I/O connectors are suited for high-speed serial data transmission and power applications.

Swann Industries Corp.    Live Oak, FL 32060
Sep 29, 2006 Portable Micro DVR video recording and monitoring system features built-in color camera, 128 MB of memory, and LCD screen for viewing and playback. Recording can be programmed into DVR through on-screen menus or triggered through video motion or sound detection. Software exports recordings to PC in AVI and JPEG formats. Unit is powered by Li-Ion rechargeable battery, which lasts up to 24 hr, or by ac adapter. USB memory stick, providing additional 20 hr of data, can be added.

Preverco, Inc.    Saint-Augustin-de-Desmaures, QC G3A2E5
Sep 29, 2006 Including Brazilian Cherry/Jatoba, Santos/Cabreuva, Sapele, and Tigerwood, Exotic Series of hardwood flooring comes in colors such as natural, bourbon, espresso, dark reddish-brown, light tan to dark orange-brown, and rich red-brown. Series is available in 3¼ in. widths in both engineered and solid hardwood and ¾ in. thickness for solid hardwood.

Extech Instruments Corp.    Nashua, NH 03063
Sep 29, 2006 With 3 wireless options and rechargeable lithium ion battery capability, Model S4000T 4 in. receipt printer is designed for desk-top and in-vehicle applications. Clamshell-style loading system and push-button release for paper door facilitate changing of paper rolls, while built-in detectors monitor temperature, voltage, and paper-out. System is in-field programmable for firmware, font, and logo setup, and has built-in Flash and SRAM memory.

AdvancedIO Systems, Inc.    British Columbia V6C 2T5  Canada
Sep 29, 2006 Based on VITA 42.3 XMC form factor, Model V1020 Intelligent 10 GbE XMC Module supports VxWorks and Linux operating systems. When combined with high-end embedded computing systems, module provides 10 GbE packet processing at line-speed for applications such as Signal Intelligence (SIGINT), Radar/Sonar, Electronic Warfare (EW), and wireless infrastructure.