Elemental LED    Emeryville, CA 94608
Jul 01, 2011 Available in both red and green, LED Exit Sign Replacement Kits include 2 ETL certified 12 Vdc LED bulbs with E26/27 candelabra base and 2 pairs of retrofit connectors that fit almost all exit sign models. Kits offer smooth, even light and exhibit no spotting, fading, flickering, or buzzing. Consuming 2.8 W, LEDs last approximately 80,000 hours, which is typically 8-10 years.

Nilfisk Industrial Vacuums    Morgantown, PA 19543
Jul 01, 2011 Comprised of 3-phase, continuous-duty vacuum cleaners constructed of heavy-duty steel and polypropylene, T-Series meets industrial demands of manufacturing facilities for collection of powders, liquids, dust, and debris. Manual filter shaker helps maintain max suction power, while release lever lowers wheeled collection container and acts as handle for disposal of collected debris. Optional HEPA filter ensures 99.995% of particles down to and including 0.18 microns are retained.

E Instruments International LLC    Langhorne, PA 19047
Jul 01, 2011 Featuring built-in hand pumps offering independent pneumatic and hydraulic calibration capabilities, PPC P/H Dual Portable Pressure Calibrator has respective pneumatic and hydraulic ranges up to 300 and 6,000 psi and overall accuracy of ±0.05% FS + 1 digit. Standard features, in addition to temperature compensation from 0 to 50°C, include low battery indicator, audio and visual alarms for over pressure, and rechargeable battery.

MICRO-EPSILON AMERICA    Raleigh, NC 27617
Jul 01, 2011 Used to measure gap width, capaNCDT CSG uses sensor electrodes and differential method to determine gap widths from 0.9-4.9 mm while moving sensor into gap. Sensor electrodes are applied to top front and back on 20 cm wide circuit board, and flexible probe enables sensor to be used in applications where measurement object is difficult to access. Also available, capaNCDT CSE offers 2.5X larger measuring range and is equipped with shielding electrode that is set back.

Gamewell-FCI    Northford, CT 06472
Jul 01, 2011 Designed to meet mass notification requirements of Local Operating Consoles as mandated by DoD in its Unified Facilities Criteria document 4-021-1, LOC-TEL utilizes telephone and 16 programmable switches to direct pre-recorded and live voice messages to any designated area within facility.

LEONI Fiber Optics Inc    Williamsburg, VA 23188
Jul 01, 2011 Used for communication and control, High Flex Fiber Optic Cables are offered in Plastic Optical Fiber (POF), Plastic Coated Fiber (PCF), HCS, and glass variants. These customized infrastructure cables and assemblies, depending on choice, can survive temperatures down to -40°C or up to +70°C. Torsion approved and tested, plug-and-play solutions are available with UV-resistant and rodent proof protective tubing and choice of connectors: HP, HFBR 4521, FSMA, ST, HP, SC, and F05.

Spellman High Voltage Electronics Corp.    Hauppauge, NY 11788
Jul 01, 2011 Housed in 9 x 1.5 x 6.1 in. package designed for OEMs, ESC Series provides accurate voltage required for semiconductor-based electrostatic chuck wafer applications. Regulated units precisely secure wafers during lengthy process cycles. Versions are available with ground referenced reversible output as well as with true floating bipolar output and associated floating center tap point. Fault diagnostic circuitry monitors power supply functionality and communicates status to user interface.

Polymer Solutions International    Medford, NJ 08055
Jul 01, 2011 Formed without crevices and cavities capable of harboring bacteria, mold, and other contaminants, ProStack® One-Piece Hygienic Pallet has see-through, open-grid top deck; smooth finish; and flow-through design that facilitate sanitization and inspections. Product is edge-rackable up to 2,200 lb and measures 40 x 48 x 6.25 in. Available in full perimeter picture frame or 3-stringer models, pallet is rated for 30,000 lb static or 5,000 lb dynamic loads and weighs 45-48 lb.

Merritt, J. R., Controls, Inc.    Stratford, CT 06615
Jul 01, 2011 Featuring non-contacting Hall-effect device with proportional output from 0.5-4.5 Vdc, Model PRO-5H offers resistance to EMI and has NEMA 4 weatherproof cast housing for wet or dirty environments. Optional features include variety of amplifier and PWM circuits, various handle designs, and mechanical interlock. Joystick is suited for scissor lifts, aerial work platforms, bucket trucks and cranes, as well as agricultural, mining, and forestry equipment.

Ashcroft Inc.    Stratford, CT 06614
Jul 01, 2011 Able to be mounted on DIN rail, conduit, or wall, CXLdp provides stable static or differential pressure measurement in HVAC comfort control systems. Detachable terminal block electrical connector also enables installation into panel without power interruption. Available in ranges from 0/0.1-0/25.0 in. H20 and accuracies of ±0.8 and 0.4% FS, transmitter provides over-pressure capability, LED status light, and CE EMI/RFI immunity rating.

Rig-A-Lite Co., Inc.    Houston, TX 77075
Jul 01, 2011 Supporting up to 150 W incandescent or 32 W compact fluorescent lamps, AVP Series features aluminum housing suitable for use in hazardous, marine, and watertight environments. Twist lock lamp holder is offered for CFL fixtures to minimize impact of vibration. Available in pendant, wall, or ceiling mount models, fixtures are suitable for marine vessels, marine repair facilities, oil and gas exploration and production, industrial manufacturing, and food processing applications.

Indcom Services, Inc.    Anderson, SC 29621
Jul 01, 2011 Serving two purposes, Metal Display Grids are used to ship rugs as well as display them in stores. Rugs are ready to be displayed at point of purchase immediately after stretch wrap is undone. Constructed to be structurally sound, these welded and powder coated racks can be customized to application requirements and sized to meet box and rug demands.

Hamilton Caster & Mfg. Co., The    Hamilton, OH 45011 4087
Jul 01, 2011 Featuring 3/8 in. thick forged steel mounting plate and horn base, EHS Series Enhanced Heavy Service Casters offer capacities to 2,400 lb and cover 6 x 2 and 8 x 2 in. wheel sizes. Units combine HPI(TM) Swivel Technology with choice of polyurethane tread wheels. All wheels are equipped with double sealed precision ball bearings or tapered roller bearings, which sustain high speeds. Casters are suited for use on in-plant trailers, towline carts, or AGV systems.

The Modal Shop, Inc.    Cincinnati, OH 45241
Jul 01, 2011 By integrating solid-state power amplifier, SmartShaker(TM) K2007E01 can be driven directly from any sound source. Unit provides force rating of 7 lbf with ½ in. usable stroke and 92% efficiency, contributing to precise modal testing or vibration studies. Model K2007E01 includes flexure suspension arms built from carbon fiber composite and EasyTurn handles for shaker positioning. Multiple gain settings and system mute are selectable via integrated digital control.

GAO RFID Inc.    Toronto   Canada
Jul 01, 2011 With measurement range up to 5 km, Model A0870002 performs end-to-end fiber identification, detecting breaks and micro-bends, even through jacketed fibers. Unit offers wavelengths from 640-660 nm and spectral width of less than 5 nm. Optical connectors include FC and Universal 2.5 mm adapters. Operating for 30 hours with single battery charge, Model A0870002 is suited for fiber optic network maintenance in telecommunications and CATV systems.

Holophane    Granville, OH 43203
Jul 01, 2011 Designed for safe operation, HFL Series meets challenges of Class I Division 2 and Class II Division 2 environments. Fixtures may be used with T5, T8, and T5HO fluorescent lamps in 2-, 3-, 4- and 5-lamp combinations, and emergency battery back-up is offered as option. In addition to chemical plants, food processing plants, and textile mills, applications include wastewater and water treatment plants, power generation plants, confectionary plants, and bakeries.

J-Works,Inc    Ganada Hills, CA 91344
Jul 01, 2011 Rated 0.5 A @ 120 Vac and 0.5 @ 100 Vdc with rhodium contact material, JSB2431 series has DPST relay outputs that provide host control between 2 poles of common line and NO reed relay connection points. Lack of moving armature extends relay life by reducing mechanical wear, and sealed design protects contacts from corrosion. Wire connection to relays is made with on-board screw type terminals, and user communicates with module from programming/test languages supporting USB communications.

ITA, Inc.    Berlin, MD 21811
Jul 01, 2011 Offered in 6 models with tank capacities from 135-1,150 L, Coral DynaClear PLUS occupies minimal floor space. Design lessens consumption of filter fabric and uses hydrostatic pressure to effectively filter both water soluble and neat oil coolant. Pendulum scraper separates sludge from filter fabric and sludge is collected in tank while used filter fabric is rewound for disposal.

Northfield Precision Instrument Corp.    Island Park, NY 11558
Jul 01, 2011 Interchangeable with 4 in. chucks, 5C Collet Chucks utilize standard wet or dry air feed tubes with same bolt pattern as 4 in. models. All components are hardened and ground to 58/63 R.C. and all diameters are ground within 1/10,000 T.I.R. Utilizing standard 5C collets as well as 5C expanding collets, chucks run at speeds in excess of 8,000 rpm.

Mini-Circuits    Brooklyn, NY 11235
Jul 01, 2011 Measuring 0.2 x 0.2 x 0.2 in., TRS1-23-75+ balanced-to-unbalanced 75 ohm transmission line transformer has wire welded, rectangular core design rated for up to 0.5 W max power. Additional characteristics include 0.3 dB typ amplitude unbalance and 20 dB typ return loss. Supplied in aqueous washable case, product is suitable for RoHS and tin/lead solder systems. Bandwidth covers CATV (forward and return), medical wireless and D2A/A2D, and other communications applications.