Linear Technology Corp.    Milpitas, CA 95035
Nov 21, 2006 With -3 dB bandwidth of 300 MHz, LT6402 differential amplifier provides on-chip filter and output common mode voltage pin, and is available in 6, 12, and 20 dB fixed gain options. Model LT6411 dual-selectable gain amplifier has -3 dB bandwidth of 650 MHz and slew rate of 3,300 V/µs, with independently selectable gains, consuming 16 mA supply current. Device can be disabled when inactive, dropping consumption to less than 0.35 mA max per amplifier.

Sauer-Danfoss    Ames, IA 50010
Nov 21, 2006 Providing displacements of 25, 30, and 35 cc, Direct Displacement Control Pumps feature internal Neutral Return Mechanism, which is protected and always lubricated. Units are designed for closed-loop machine operations and are suited for wide area mowers, sweepers, mini excavators, walk-behind skid steer loaders, small tractors, and other machines used in areas where high noise levels are an issue.

ERNI Electronics, Inc.    Midlothian, VA 23112
Nov 21, 2006 MicroSpeed(TM) Power Module connectors, with 2.0 mm contact pitch, are suited for use with devices such as CPUs, drives, and LCD panels. While male versions come in 1, 2, 9, and 10 mm heights, female versions are offered in 4, 6, 8, and 10 mm heights. Series enables stacking heights from 5-20 mm, addressing every PCB arrangement requirement. It offers multiple-connector mating capability and features integrated 3-point double beam female contact.

Glacier Computer    Amherst, NH 03031
Nov 21, 2006 Designed for GX Series of industrial computers, Glacier Clamp provides solid grip on PS/2 and/or USB connection and is suited for harsh environments where extremes of temperature, shock, and vibration are experienced. Clamp prevents connection from accidentally being pulled out or loosening from vibration over time.

Sierra Monitor Corp.    Milpitas, CA 95035 6825
Nov 21, 2006 FM-approved for performance and area safety requirements, 4501-05 hydrogen sulfide (H2S) gas sensor module features 4-20 mA, 2-wire, loop-powered design. It is supplied with stainless steel transmitter and sensor enclosure. Design combines non-intrusive calibration with integral scrolling menu-driven LCD for access to gas status, calibration information, and diagnostics. Product offers variable range selection and mounting configurations.

DIRAK    Chantilly, VA 20151-1220
Nov 21, 2006 Incorporating D-SNAP technology, SNAP-LINE Bowed Handle functions as both handle and latch, eliminating need to use separate products. Spring-loaded wings are inserted into channel in handle housing. As wings retract after passing through cutout, SNAP-LINE handle is held securely in place, even in severe vibration applications. Constructed of zinc die-cast, handle can be used for right- or left-hand applications and for horizontal or vertical doors.

American Ballast    Fremont, CA 94538
Nov 21, 2006 Featuring universal input voltage of 108-305 V, Electronic Ballasts are compatible with most infrared-based remote control applications as well as multiple lamp wattages and multiple number of lamps, including D, Twin Tube, Quad Tube, Triple Tube, and Circline lamps. Units are available with bottom or side entry terminal blocks and include color-coded connectors. Auto restart function and internal fuse maintain ballasts' circuit integrity.

ITT Goulds Pumps    Seneca Falls, NY 13148
Nov 21, 2006 Designed for PumpSmart PS200, PumpSmart v5.0 can calculate flow of centrifugal pumps within ±5% of pump's rated flow without need for external instrumentation. Function mathematically models pump power curve with only 4 points of CDS pump performance curve data. Advanced Pump Protection takes into account hydraulic and mechanical losses associated when changing speed of centrifugal pump, while Positive Displacement Pump Protection protects pumps with constant torque load.

Landa Water Cleaning Systems    Camas, WA 98607
Nov 21, 2006 VHG hot water pressure washers include LanCom remote control device that can be used to turn them on or off, ignite burner to create hot water, or switch from clear rinse to soapy wash water from up to 300 ft line of sight. Electrically powered, 24 x 53 in. units have flow rate of 2.5-8 gpm and spray pressure of 1,000-3,000 psi, and are heated by natural gas or liquid propane. Heat is retained in leak-free, cold-rolled, ½ in. Schedule 80 steel pipe coils.

AC Technology Corp.    Uxbridge, MA 01569 2001
Nov 21, 2006 Compatible with G-motion line of asynchronous gear motors, Model 940 PositionServo Drive with motion controller uses BASIC-like motion-programming language to provide indexing and positioning but can also run in traditional velocity or torque modes. Electronic Programmable Module removable memory chip allows servo control parameters and motion control programs to be transferred from one drive to another, even without power applied.

Hautau Specialty Machines    College Corner, OH 45003
Nov 21, 2006 Used to automate loading of tube shears or saw cut off machinery, dial loader is designed for continuous processing of various shaped tubing. Loader handles complete bundles of mill length tubing, which is supported by 4 heavy-duty steel arms with nylon rotary dials positioned at ends. Split design dials accommodate up to 24 different sizes/shapes while orienting tubing for optimal cutoff angle, such as 45° for square and 30° for rectangular tubing.

VICI Metronics, Inc.    Santa Clara, CA 95051
Nov 21, 2006 Offered with choice of plumbing and flow configurations, Dynacalibrator® Model 150 generates precise ppm or ppb concentrations of chemical compounds in gas stream using permeation devices as trace gas source. Passivated glass-coated permeation chamber houses permeation device, with measured inert carrier gas sweeping calibration gas/vapor from chamber. Digital controller maintains chamber temperature at set point with accuracy of ±0.01°C, traceable to NIST standards.

Teridian Semiconductor    Irvine, CA 92618-5201
Nov 21, 2006 Featuring Single Converter Technology(TM), Model 71M6403 Electronic Trip Unit can be tuned according to voltage, current, rate of voltage increase, and rate of current increase. It trips instantaneously on threshold events within 7 ms from power on, or can be set to trip on delay. Unit incorporates 22-bit delta-sigma ADC, 7 current sensor inputs, digital temperature compensation, precision voltage reference, 32-bit programmable computation engine, timers, RTC, 2 UARTs, and 8-bit MCU.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Nov 21, 2006 Featuring adjustable setpoint and deadband, Mercoid Series CXA is available with normally open or normally closed SPST snap switch and can range from 15-180 psig. With 20 A electrical rating, unit is suitable for water well pumps and other pumping systems. Switch is not mounting sensitive, which helps ease installation.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Nov 21, 2006 Accepting all standard process signals such as 4-20 mA, 1-5 V, and 0-5 V, Series FIV flow rate/totalizer/batch controllers feature 7-segement LED display that provides 4½ digits of flow rate and 6 digits of total. For applications requiring more than display of rate or total, meters can be equipped with 2 relays and 4-20 mA retransmission output. Relays can also be used for alarming based on flow rate or for batch controlling based on flow total.

C & D Technologies    Mansfield, MA 02048-1151
Nov 21, 2006 Comprising 6 models, VRM11.X Series offers choice of 1U or 2U form factors and both 80 and 150 A current options. All models are RoHS-compliant and include DAC programmable output voltage, power good output, differential remote sense, and remote enable. Supervisory functions such as output over-current, short circuit protection, over-temperature indicator, and output current level signal are also provided. Three versions with no load line are suitable for non-Intel applications.

Thomas & Betts Corp.    Memphis, TN 38125
Nov 21, 2006 Featuring steel construction, Kindorf® Trapnut(TM) cuts installation time of trapeze framing and support systems by eliminating need to thread nut from either end of threaded rod. Scissor design, consisting of top and bottom plates fastened with pin, enables plates to swivel open and close. Closing at any position on threaded rod, scissor design and precision threads allow for fine-tuned adjustment in either direction.

Thermal Dynamics Corp.    Chesterfield, MO 63017
Nov 21, 2006 Featuring portable design, Drag-Gun® Plus offers maximum arc visibility for operator control and includes SureLok® torch, which provides ½ in. genuine cut capacity. Built-in air compressor minimizes moisture content in air supply. Cutting system delivers full cut capacity at 230 V @ 15-35 A, which is continuously adjustable.

Advantech Automation Corp.    Cincinnati, OH 45240
Nov 21, 2006 Bracketed for wallmount or desktop applications, Model IPC-5120 supports Micro-ATX motherboard with up to 4 half-length PCI slots, while Model IPC-7120 supports standard ATX motherboard and up to 7 half-length PCI slots. Both RoHS-compliant units are 12.1 in. deep and provide in-chassis rear-in/front-out airflow with one 85 cfm fan and one 10 cfm fan. Front access I/O includes keyboard and mouse PS/2, LAN, USB, and video ports, as well as power cord connector.

LogicVision, Inc.    San Jose, CA 95110
Nov 21, 2006 ScanBurst(TM) combines Mentor's automatic test pattern generation (ATPG) and embedded compression products, FastScan(TM) and TestKompress®, to promote accuracy and effectiveness in detecting subtle delay defects prevalent in nanometer SoC designs. This integrated DFT (Design-for-Test) solution complements existing ATPG-based DFT techniques by providing environment to insert scan and clock control structures for at-speed testing based on BurstMode Timing(TM) technology.