Stafford Manufacturing Corporation    North Reading, MA 01864-0277
Nov 03, 2006 Designed for use on supported shafts, Precision Sleeve Coupling is machined from steel as standard and optionally offered in aluminum and stainless steel. Solid center section provides close tolerance fit on ground shafting and includes keyway as well as Accu-Clamp(TM) design, which incorporates integral self-centering clamping collars at both ends. Available in 6 sizes from ½-1½ in. ID, product maintains concentricity to within .001 TIR.

TKF, Inc.    Cincinnati, OH 45203
Nov 03, 2006 Driven by belt or chain, vertical reciprocating conveyors suit applications where items need to be moved between levels. Counterweighted lift mechanism minimizes hp and power requirements, while shaft-mounted drive reduces maintenance requirements. Load and unload points can be incorporated at any height and on any side, permitting Z, C, or right-angle flow. Load capacities are available to 6,000 lb, with vertical travel to 100 ft, and lift speeds range from 10-200 fpm.

Vista System    Sarasota, FL 34234
Nov 03, 2006 Viewable from distance, Information Post Sign accommodates A4 or letter format inserts and is suitable for displaying directions, promotions, and menus. Top end cap is formed to host laser-cut information pictograms that mesh with standard Vista profiles. These steel or aluminum parts can be used for displaying logos, icons, and more. Sign accepts variety of insert materials including paper, engraving, vinyl, digital printing, and photo-polymer.

CIT Relay & Switch: Division of Circuit Interruption Technology, Inc.    Maple Grove, MN 55369
Nov 03, 2006 Offering PCB pin and quick-connect mounting, A2 Series features contact ratings up to 40 A at 14 Vdc, while A3 Series is rated 80 A at 14 Vdc. Contact resistance is less than 30 mW initially on both types. Max switching power, voltage, and current is 630 W, 75 Vdc, and 40 A for A2 Series and 1,120 W, 75 Vdc, and 80 A for A3 Series. Providing electrical life of 100K cycles, units are solderable at 260°C for 5 sec with operating temperature of -40 to 85°C.

Datalase Inc    Cheshire WA8 8FW  United Kingdom
Nov 03, 2006 DataLase® process can produce variable, market-specific information directly on packaging/labels or amend it at end of production line. Area to be marked is coated with DataLase and left blank. Information is then activated at end of production line using CO2 laser, which causes white-to-black color change reaction. Any changes can be programmed into system, promoting printing of customized data on pack without stopping production line.

Automation Products Group, Inc.    Logan, UT 84321
Nov 03, 2006 Series IRU 2000/3000 features virtually maintenance free design with internal temperature compensation, programmable response time and programmable filtering for reliable operation in harsh application environments. Offering detection range from 1-35 ft, sensors provide non-contact method of presence/absence detection, proximity detection, or level control in variety of applications.

Electro Standards Laboratories    Cranston, RI 02921 3403
Nov 03, 2006 Model 4875 Remotely Controllable KVM A/B Switch allows access to 2 computer/servers from single set of KVM devices. Keyboard, monitor, and mouse devices are connected to common set of ports, and computer/servers are connected to A and B set of ports. Switch position can be controlled manually from front panel pushbutton, or remotely by contact closure connected to RJ45 remote port. Switch position status is displayed by front panel LEDs.

ITT Industries, Cannon    Santa Ana, CA 92705-5612
Nov 03, 2006 Developed for coax, fiber, and HV applications, VEAM CIR Series connectors can function as electrical, optical, or pneumatic connectors. Coaxial CIR connectors accept most popular RG cables, while fiber styles come with single- or multiple-fiber termini. Other connector configurations include high voltage, twin- or tri-axial with size 4 or 8 contacts, and RFI/EMI in which grounding fingers on plug connectors provide 360º plug-to-receptacle shield integrity.

Tyco Thermal Controls    Menlo Park, CA 94025
Nov 03, 2006 Providing continuous monitoring of temperature, ground fault, operating currents, and voltages, DigiTrace NGC-30 power distribution system can control up to 260 circuits with multiple networked panels. Problems and upsets are reported on User Interface Terminal which allows central access to all heat-tracing circuits. Features like alarms, events, data logging, trending, recipes, and batching simplify maintenance of any heat-tracing installation.

Knaack Manufacturing Company    Crystal Lake, IL 60014
Nov 03, 2006 Featuring 16 gauge steel construction and 3/16 in. steel top mounting angles, WEATHER GUARD Van Solutions bulkheads fit Ford and Chevy vans. Bulkheads have 9 x 12 in. Dog Hatch(TM) in bottom for safe transportation of long-length material and include 14 in. wide steel shelving. Product's 57½ in. tapered high end panels allow closer installation to sidewall and provide additional cargo space in middle of both Sprinter and full-size vans.

B & H Labeling Systems    Ceres, CA 95307
Nov 03, 2006 Integrated Endura® Sleeve Labeling System shrinks labels at speeds up to 400 cpm on 2-4.8 in. dia, 2-12 in. high containers that are round, rectangular, or oval shaped. SLS sleeve applicator features cutter assembly, which along with anodized mandrel and servo-driven label feed system achieves ±0.5 mm accuracy and reduces scrap to 0.5%. SLT shrink tunnel module uses controlled steam to ensure even shrinking.

Freeman Technology    Gloucestershire GL20 8DN  United Kingdom
Nov 03, 2006 FT4-DA v4 software for FT4 universal powder tester facilitates rapid interpretation and summary of measured data from powder samples. It incorporates latest types of test available on FT4 and offers redesigned user interface. Data analysis software enables analysis of all test types and data sets, which can be represented graphically and in report form. Standalone application can be installed on any computer, allowing analysis away from laboratory if required.

Sealant Equipment & Engineering, Inc.    Plymouth, MI 48170-0965
Nov 03, 2006 Designed for fluid control of level-seeking materials, Model 2600-001-006/7 Tip-Seal® dispense valve consists of double-acting actuator, 13.7 in. extension nozzle, and carbide Tip-Seal needle to prevent dripping at shut-off. For high-volume fluid transfer, valve can flow up to 6 gpm with 0.406 in. orifice nozzle. Along with 29:1 air-to-fluid power ratio for flow control, product has ¾ in. NPT fluid-inlet ports and is double-air-operated through ¼ in. NPT ports.

Dapra Marking Systems    Bloomfield, CT 06002
Nov 03, 2006 Ensuring marking quality despite variations in shape, surface condition, or material of part, Technomark Multi 4 with IDI (Intelligent Driving Impact) marks rough or irregular surfaces with human-readable text or DataMatrix codes. Multi 4 is available in bench-top model, portable/ handheld model for marking large parts, Combo model with bench-top and portable capabilities, and Integrator model for use in automated production lines.

Inter-Power Corp.    Almont, MI 48003
Nov 03, 2006 Offered in cord lengths of 1.8 m, Interpower(TM) Sheet G/C7 Jumper cordsets are for equipment rated 2.5 A with service up to 250 Vac. Class II jumper cordsets are available with IEC 60320 Sheet G plug connector, 2 x 0.75 mm²/18 AWG universal cable, and IEC 60320 C7 connector. Applications include connection of IEC 60320 Sheet H outlet to IEC 60320 C8 power inlet.

Strategic Test Corporation    Woburn, MA 01801-1915
Nov 03, 2006 Measuring 2.6 x 1 x 0.16 in., TRITON-290 Intel/Marvel Monahans P System on Module contains 806 MHz PXA290 processor coupled with 64 MB SDRAM and 128 MB Flash. It uses 200 pin SODIMM connector and has extended temperature range of -25°C to +85°C. RoHS compliant module features programmable CPU power supply with Intel Wireless SpeedStep® Power Manager technology, 16-bit A/A/D multiplexed external memory interface, and DS1339 real time clock.

Wire Belt Company Of America    Londonderry, NH 03053-7449
Nov 03, 2006 With 76% of open surface, Model TC-327 conveyor belt allows convection and air flow in tortilla cooling conveyor line. Stainless steel design keeps belt from stretching, sagging, or creating fire hazards in high heat operations, while C-CureEdge(TM) closed loop ends ensure safety in production environment. Product is packaged with EZSplice(TM) system that includes pliers kit and sprockets.

Universal Separators, Inc.    Madison, WI 53705
Nov 03, 2006 Featuring tramp oil removal and solids filtration to sub-micron levels, CoolantLoop(TM) works with in-ground coolant sumps and large above-ground coolant tanks. Continuous skimming from pit or tank removes floating tramp oil, keeping coolant clean and healthy. System concentrates and removes floating tramp oil and settleable solids solely by gravity. Fine filtration to micron levels and magnetic separations to sub-micron levels are available as options.

Elo TouchSystems, Inc.    Menlo Park, CA 94025
Nov 03, 2006 Suited for point-of-sale, point-of-service, loyalty systems, and kiosk information systems, 1529L features acoustic pulse recognition (APR) touch technology. This 15.5 in. LCD works with water and other contaminants on screen and supports stylus, gloved hand, and fingernail activation. Options include integrated 3-track magnetic stripe reader, 2 x 20 vacuum fluorescent rear-facing customer display, and biometric fingerprint recognition device.

Advance Div. of Philips Electronics North America    Rosemont, IL 60018
Nov 03, 2006 Measuring 4.3 x 1.3 x 1.2 in., e-Vision® 120 V Mini 20 W ballast blends into modern fixture designs for downlighting, track lighting, and accent lighting applications. Safety features include automatic lamp end-of-life detection and lamp monitoring. Lamp wattage regulation optimizes lamp color quality over life and reduces lamp-to-lamp variations. Product works with ceramic metal halide lamps and has 90°C max case temperature rating.