Tra-Con, Inc.    Bedford, MA 01730
Mar 29, 2006 TRA-BOND F113SC epoxy adhesive is formulated for fiber optics, LED displays, lenses and other optical components. It provides high bond strength and low stress connections with no pistoning. Featuring Tg of 95°C, 2-part rigid epoxy system is curable at room temperature or can be heat cured in 15 min. It exhibits low water absorption percentage.

Dampney Co., Inc.    Everett, MA 02149
Mar 29, 2006 Thurmalox® Stove Paint is fast drying, long lasting, and heat resistant silicone coating for stove, stovepipe, and hearth accessories. Available in variety of colors, it resists blistering, peeling, or flaking. Product comes in aerosol spray cans for application on fireplace andirons, screens and grates; barbecues; gas grills; and hibachis.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Mar 29, 2006 Loctite® 7703 Hand-held LED Light Source delivers immediate cure of Loctite® 3552(TM) and 3553(TM) Visible Light Cure Adhesives. It provides output up to 2.0 W/cm² of visible light irradiance, and measures 9 x 1 x ¾ in. High-powered, portable system features LED point light source with extended tip that cures adhesive joints up to ¼ in. square. It can use rechargeable batteries or ac adapter, and delivers instant on/off, and is suited for applications in crowded or hard-to-reach areas.

Cemline    Cheswick, PA 15024
Mar 29, 2006 Cem-Trol(TM) Solid State Water Heater Control Module combines temperature control and limit functions for Cemline packaged steam and boiler water fired water heaters into single control module. Controller features on board operating PID temperature control, high temperature safety cut offs, and alarm indications.

Cemline    Cheswick, PA 15024
Mar 29, 2006 Vertically packaged SPH Series water heaters provide solution for producing domestic hot water with hydronic boilers including cast iron, copper tube, water tube, or specialty high efficiency condensing boilers. Completely packaged and ready for use, heater is available in range of storage tank volumes from 60-500 gal with ability to heat up to 2,500,000 BTU/hr of hot water.

Schwab Corp.    Lafayette, IN 47903
Mar 29, 2006 DataFORTRESS(TM) system eliminates need and hassle of off-site storage, and automates task of backing up data. With DataFORTRESS, storage drives are protected from fire and flood in UL rated enclosed environment. Product system ranges from 120 GB of storage for home unit, to 1.6 TB of storage in commercial system. It includes software that features multiple backup options including high level encryption.

Anver Corp. - Anver.Com    Hudson, MA 01749
Mar 29, 2006 Made from elastomer that can handle up to 400°F, ESD vacuum suction cups have static dissipating value of 97 Kohm/cm at 500 V. Capable of bleeding off static charges through ground, whether on machine or built into system, cups are available in flat, single-, and multi-bellow shapes in sizes from 1/8-2 in. OD. Cups are designed for use where there is an explosionproof requirement as well as in food, electronics, automation, packaging, and printing industries.

ETCO Incorporated    Warwick, RI 02888 1501
Mar 29, 2006 High density, high temperature silicone molded AB19 spark plug boot is used for traditional coil and ignition wire systems in Ford V6 and V8 engines from 1992 through current year. Featuring 115° design, it is available 3 material heat ranges: silicone 450°F, gray 500°F, and pink/salmon 550°F. Rated for 8 mm cable, AB19 Spark Plug Boot can be assembled using table-mounted, air-operated booter.

Elma Electronic Inc.    Fremont, CA 94538
Mar 29, 2006 Type 04 switch is available in over 100 standard configurations, and is used in applications as selector switch or audio attenuator. With up to 24 positions, it offers contacts in hard gold or gold flash over hard silver. Product is available with shaft dia of 6 mm and ¼ in., and works within specifications even after 25,000 switching cycles. Rugged switch is suited for medical, industrial, audio, and homeland security/defense applications.

Wire Belt Company Of America    Londonderry, NH 03053-7449
Mar 29, 2006 Designed to handle small, delicate products, Compact Grid(TM) is engineered with 70% open surface area, making it suited for processes in which product coating, drainage, and liquid or air circulation are factors. Open stainless steel design facilitates cooking operations such as frying and baking as well as cooling freshly baked or freshly fried products in high-volume, high-throughput processes.

Stanley-Proto Industrial Tools; A Division of The Stanley Works    Conyers, GA 30013
Mar 29, 2006 Needle nose, duckbill, and looping pliers, available with diagonal, angled, and end cutters, come in semi-flush edge and flush-edge designs. They measure between 4½ and 5¾ in. long and have jaw widths under ½ in. Suited for repetitive-use applications, products employ dual-leaf spring design that automatically opens jaws when user relaxes grip. Pliers are hot drop forged, and cutting edges are electronically induction hardened.

Siemens Industry, Inc.    Elk Grove Village, IL 60007
Mar 29, 2006 Featuring network-centric architecture and SINAMICS drive technology, SINUMERIK 802D works in standalone as well as plant-wide automation solutions. Operator panel-based control system combines NC, PLC, and HMI in one unit and delivers 5-axis machining capability. In addition to DRIVE-CLiQ drives communications system, product uses thin client technology for operator input and accepts CF boards for part program storage, transmission, and processing.

Siemens Industry, Inc.    Elk Grove Village, IL 60007
Mar 29, 2006 Suited for machine tool OEMs and end-users, Virtual Production service subjects process chain to simulative analysis, from CAD/CAM system to workpiece surface, without interrupting production. All programs are optimized on computer, except NC program, which is simulated on actual machine. This 3-step process includes analysis of data quality, execution of part program by NC, and simulation based on characteristic features of position-controlled drives.

PTG Industries    Lake Mary, FL 32746
Mar 29, 2006 Able to perform consumable-free direct part marking on any material, Fiber Tower Desktop utilizes air-cooled fiber laser with beam quality of M2 less than 1.05. Compact design incorporates integrated controller for laser, Z-axis, and scan head. With spot size that contributes to detail and accuracy in cutting and marking applications, plug-and-play unit draws power from 100 Vac outlet and may be carried by one person for portability and location flexibility.

Ritron, Inc.    Carmel, IN 46032
Mar 29, 2006 Designed to compensate for lack of UHF radio coverage, 5 W Liberty Repeater model RLR-456 is offered in wide band and narrow band versions with operating frequency range of 450-470 MHz. Its all-metal, powder coated aluminum housing, which measures 11.5 x 8.0 x 2.75 in., protects against ingress of dirt and dust. Also available as 2 W model RLR-460, both units include built-in duplexer and power supply. Repeaters are rated at 100% continuous duty cycle.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Mar 29, 2006 Featuring one-part construction, VAZ-2T1-FK AS-Interface Flat-to-Round-Cable Converter is suited for use in narrow and low-profile cable channels as well as other space-critical locations. Product installs in under 1 min in most applications and is designed for use where AS-Interface and 24 Vdc external power need to be on one M12 connector. Products are suited where AS-Interface drives with motor starters are used and for connecting AS-Interface sensors.

Global Lighting Technologies Inc.    Brecksville, OH 44141
Mar 29, 2006 MicroLens(TM) molded light guides can be designed in sizes from 0.24-15.4 in. diagonal to provide single LED monochrome, bi-color, or tri-color backlights. Pixel-based light extraction technology provides transition area that spreads light uniformly, extracting light at each point across panel. With packages no thicker than 0.60 mm and power consumption of 1-20 mA at 3.5 V, applications include PDA keypads, desktop monitors, and instrumentation and control displays.

Bosch Rexroth Corp., Linear Motion & Assembly Technologies Div.    Charlotte, NC 28273
Mar 29, 2006 CKK and CKR Compact Module electromechanical actuators are available in 200 mm wide extrusion utilizing two size 25 Ball Rail® Systems for length, speed, and payload. Belt-drive CKR Module uses low-wear, steel-reinforced polyurethane belt with aluminum pulleys to deliver speeds up to 5 m/s over distances up to 10,000 mm. Ball screw drive version CKK offers stroke length of 5,500 mm. Load capacity for both models is 20,000 lb max.

Bosch Rexroth Corp., Linear Motion & Assembly Technologies Div.    Buchanan, MI 49107-1801
Mar 29, 2006 Model VE2/MP multipole conveyor stop gate with SmartStop(TM) technology offers functionality of VE2 stopgate, pneumatic solenoid valve, embedded microprocessor, 3 proximity sensors, and array of LED indicators to provide operations control and feedback in self-contained package. It includes two 3-pin connector plugs that provide 6 I/O connections, and 8 LED displays that provide visual indication to operational status of stop gate. Unit bolts into T-slot on extruded aluminum conveyor profile.

BI Technologies Corp.    Fullerton, CA 92835-1051
Mar 29, 2006 Featuring profiles as low as 3 mm, RoHS-compliant HM69 Series has single turn construction with proprietary ferrite core material and class F, 155°C insulation. Products are designed to operate at frequencies up to 5 MHz, with current ratings up to 70 A. Series comprises 10 case sizes with inductance range of 25-300 nH at 100 Khz, typical dc resistance from 0.17-0.45 milliohm at 25°C, and rated current from 18 A to 70 Adc.