Fujitsu Semiconductor Europe GmbH    Langen D-63225  Germany
Jul 07, 2011 Offered in 256, 128, and 64 Kbit densities, MB85RSxxx series comes in 8-pin plastic SOP packages with standard memory pin assignment fully compatible with E2PROM devices. SPI FRAMs (Ferroelectric Random Access Memory), operating from 3.0-3.6 V, provide endurance of 10 billion write/read cycles as well as data retention of 10 years at 55°C. Series has 25 MHz max operating frequency and are suited for low power applications.

Intercomp Co.    Minneapolis, MN 55447-4742
Jul 07, 2011 With capacities from 2,000-100,000 lb and NTEP models available, CS3000(TM) is supplied as standard with compact, handheld RFX(TM) Wireless Weighing Indicator for control of scale functions. Rechargeable D Cell batteries last up to 3,000 hr, and large pushbutton controls promote trouble-free operation. Top Eyehook and Bottom Crosby S-1 Swivel Hook are also standard, and shock-mounted, weatherproof case provides max protection against moisture, dust, and rough usage.

M/A-COM Technology Solutions, Inc.    Lowell, MA 01851
Jul 07, 2011 GaAs-based MAAL-01070X LNAs facilitate implementation in RF and microwave front-end circuits. Respectively operating from 0.5-1.6 GHz and 1.4-4.0 GHz, MAAL-010705 and MAAL-010706 are highly linear LNAs with 0.5 and .06 dB noise figures, 21.0 and 17.5 dB gain, 19 and 20 dB input return loss, and 18 and 16 dB output return loss. Operating from 0.1-3.5 GHz, MAAL-010704 broadband LNA offers 0.8 db noise figure, 12 and 20 db respective input and output return loss, and 14.0 dB gain.

Meese Orbitron Dunne Co.    Ashtabula, OH 44004
Jul 07, 2011 Rotationally molded of weatherproof, waterproof polyethylene for long-term, indoor/outdoor operation, Poly-Trux® 54P-18 is available with optional spring-loaded platform that reduces bending and reaching into utility truck while facilitating lifting and promoting complete dumping. Plastic platform, set inside utility truck, automatically rises as materials are removed while hiding spring mechanism underneath to prevent contact. Truck is set on heavy-duty base with 6 casters.

NKK Switches    Scottsdale, AZ 85260-3420
Jul 07, 2011 Utilizing single photo transistor to activate momentary ON position, FP01 Series provides minimum of 3 million mechanical operations. Rugged construction and smooth actuation allow repeated and rapid actuation force anywhere on cap surface. Operating from -25 to +50°C, contactless, snap-in mount devices include 6-pin socket and LED illumination with LEDs as integral component of switch. Required panel cutout is 22.9 mm and recommended panel thickness is 2.5-5 mm.

Renishaw, Inc.    Hoffman Estates, IL 60192
Jul 07, 2011 Able to be programmed for multiple parts and re-programmed in minutes, Equator(TM) enables high-speed comparative gaging for inspection of high-volume manufactured parts. Software-programmable solution can switch between different parts in seconds, and repeatable gaging technology utilizes comparison of production parts to reference master part. Re-mastering is as quick as measuring production part and immediately compensates for any change in thermal conditions on shop floor.

Watts    North Andover, MA 01845
Jul 07, 2011 Suited for commercial, institutional, and residential sectors, Rainwater Harvesting Systems can reduce water consumption by 65%. Commercial and institutional systems offer storage capacity of 200 to over 2 million gal, and manage filtration, storage, distribution, and treatment functions. Available in above and below ground models, residential systems store 225-3,000 gal of rainwater. Harvested water can be used for process applications, toilet flushing, laundry, and fire suppression systems.

Larson Electronics, LLC    Kemp, TX 75143
Jul 07, 2011 Rated Class 1, Division 2 for hazardous locations, Model HAL-2X400MCE features two 400 W metal halide lamps that provide 50,000 sq-ft of coverage, and 39 x 35 in. wheeled tower base that allows user to move fixture about workplace. Unit can be extended to 8 ft for max coverage and collapsed to 5 ft for transport. With tilting base design, user can tilt unit back while extending tower to full height, set lock pin, and then tilt it fully upright for secure placement.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Jul 07, 2011 Available in 0603 and 0805 sizes, GCE Series covers all nominal working voltages from 50-100 V with capacitance values of 10, 22, 47, and 100 nF. Monolithic ceramic capacitors utilize conductive resin for terminations, helping to eliminate cracking of body caused by mechanical stress induced by board flexing or wide variation of temperature. By using multi-layer serial capacitor approach to construction, capacitors will not easily short-circuit either.

Crystek Corp.    Fort Myers, FL 33907
Jul 07, 2011 Operating from 2,700-3,400 MHz, CVCOT8BE-2700-3400 has typ phase noise of -85 dBc/Hz @ 10 kHz offset and tuning sensitivity of 120 MHz/V. Pulling and pushing are minimized to 25.0 MHz and 10.0 MHz/V, respectively, and second harmonic suppression is -12 dBc typ. Supplied in hermetically sealed TO-8 package, VCO features metal-can construction with gold-plated pins with no internal wire bonds for optimized signal integrity. Tuning voltage range is 1.0-10 V, with 11 V input.

Thomas & Betts Corp.    Memphis, TN 38125
Jul 07, 2011 Manufactured as continuously molded strip, Sta-Kon® Plastic Strip-Fed Terminals, rated to 600 V, will not jam equipment or tooling and have consistent surface. Funnel-entry facilitates and accelerates wire insertion, internal barrel serrations promote conductivity and pullout strength, and sleeved barrels prevent separation. UL94V2 flame-rated, nylon insulation withstands operating temperatures of 221°F and is resistant to chemical exposure, impact, and abrasion.

Liberty Pumps    Bergen, NY 14416
Jul 07, 2011 Intended for residential applications, SPAC-Series consists of 18 x 22 in. polyethylene sump pit with fully installed sump pump and 1½ in. schedule 40 PVC discharge. Molded raised platform in bottom of pit minimizes potential for debris to enter pump. System is available in 1/3 and ½ hp models.

E Instruments International LLC    Langhorne, PA 19047
Jul 07, 2011 With temperature range of -55 to 140°C, Model TCS140 is suitable for calibrating glass thermometers and for short thermocouples and thermoresistors. Dry Block insert can be replaced with Liquid Bath complete with adjustable speed agitator. Unit heats from -30 to 140° in 15 minutes and cools from 140-0°C in 15 minutes with stabilization time of 10 minutes. Optional Black Body insert is available for IR thermometers.

Geometric Technologies    Scottsdale, AZ 85260
Jul 07, 2011 Designed to optimize 2-dimensional packaging, NestLib® 2011 R2 provides high-speed algorithms for fully automated true shape nesting. In addition to saving material while producing parts, software also allows reuse of waste material for future requirements. Release 2 can handle piercing data attached to part while nesting, and offers multi-tool support for cutting different edges in part by incorporating different tool compensation in nested layout.

Kemet Electronics Corp.    Greenville, SC 29606
Jul 07, 2011 Supplied in EIA 0402 case size with C0G dielectric, High Temperature 200°C Series MLCCs feature voltage range of 10-100 Vdc and capacitance of 0.5-1,500 pF. Non-polar devices produce no piezoelectric noise, have no capacitance change with respect to applied rated DC voltage, and no capacitance decay over time. Applications include high temperature environments present in down-hole exploration equipment, aerospace engine compartments, and geophysical probes.

PayCommerce    Piscataway, NJ 08854
Jul 07, 2011 With processor-agnostic PayCommerce PCI DSS Level 1 platform, ISOs can deliver cloud-based, integrated payment services to existing and future customers without changing existing processors. Validated payments platform provides single source for all customer billing and payment activity as well as access to multiple processor and payment types, fraud management, Level 3 data, and mobile payment solutions. Dashboard and reporting features deliver up-to-date payables and receivables insight.

Alkacon Software GmbH    Köln DE-50996  Germany
Jul 07, 2011 Built in Java and XML from open source components, OpenCms v8.0.1 enterprise-ready solution can be deployed on existing IT infrastructure and delivers features suited for medium and large enterprise internet or intranet applications. Advanced Direct Edit (ADE) mode lets users create page content via drag-and-drop functionality and directly modify page properties, while sitemap editor also allows for creation of new pages and rearranging navigation tree via drag-and-drop operations.

Chemir Analytical Services    Maryland Heights, MO 63043
Jul 07, 2011 Proprietary service helps identify unknowns, characterize materials, isolate contaminants, and resolve other analytical challenges via instruments such as Nicolet 6700-FTIR Advanced Gold spectrometer, which is configured to work in NIR and mid-IR and comes with attached Continuum IR microscope. Features facilitate identification of small particles and accelerate contaminant identification and surface analysis of organic and polymeric materials.

Atlas Material Testing Technology LLC    Chicago, IL 60613 1831
Jul 07, 2011 Panel PC-equipped Ci4000 and Ci5000 Weather-Ometers provide suite of data acquisition (DAQ), remote access control, and monitoring tools. With included WXView DAQ software, weathering instruments gain support for remote access via LAN interface, remote functions available in 7 languages, as well as ability to create and apply unique identification/name to each Weather-Ometer. Control system also offers USB connections and UI that promotes efficient transfer of information.

EMI Supply, Inc.    Concord, NC 28027
Jul 07, 2011 Available with 12-47 separate pieces, Williams Compact Case Socket Sets feature chrome vanadium steel tools and sockets with SUPERTORQUE® lobular openings. Williams Rugged Case Tool Sets, offered in 11 sets ranging from 20-95 separate pieces, include shock proof products equipped with heavy-duty metal latches and hinges for professional mechanics and tradesmen. Creeper options include low-profile version, adjustable 2-seat style, and 2-seat style with plastic pan under seat.