techMatrix, LLC    Eden Prairie, MN 55346
Jan 05, 2007 Automated resistance spot weld platform, RSX50, features weld head that can be switched between parallel gap and opposed electrode welding. Rotary dial plate lets operator load and unload parts while gantry robot safely welds parts behind light curtain. PC-controlled machine runs techMatrix's WeldWorks(TM) Software Suite on Windows XP OS. With it, engineers can manage weld recipes, save and analyze critical RSW data, and keep process in control using 6 Sigma quality tools.

Linear Technology Corp.    Milpitas, CA 95035
Jan 05, 2007 Operating at low duty cycles ranging from 2-90%, Model LTC3823 develops output voltages from 0.6 V to 90% VIN. Input voltage range is 4.5-30 V. Synchronous, step-down controller includes integrated PLL synchronization, output voltage tracking, and differential amplifier that provides true differential remote output voltage sensing of positive and negative terminals. Housed in 28-lead SSOP or 32-lead 5 x 5 mm QFN package, IC uses current mode control and can operate without sense resistor.

Sonic Tool Company    Milford, CT 06460
Jan 05, 2007 Delivering up to 800 W of ultrasonic energy, 40 kHz Sonic Weld 4010 is suited for non-ferrous metal-joining applications, such as welding battery components or small gauge electrical wires and terminals. Measuring 4 x 5 x 12 in., unit has ½ wave reach of 12 mm and full wave reach of 115 mm. Total travel of actuator is 25 mm. Components are easily presented between horn and anvil for manual or automated welding.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jan 05, 2007 QuickSwitch Model 6284 enables access to 2 ESCON Fiber Optic networks from one computer connected to ESCON COMMON port. Featuring MEMS-based multimode mirror switch technology, switch can be controlled manually via front panel pushbutton or remotely via RS-232 (DB9) serial port. Position is displayed on front panel LED or computer terminal via remote port. Insertion losses are under 1.0 dB, and switched Fiber Optic ESCON ports are transparent to all data.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jan 05, 2007 Acting as signal source with no optical loss, QuickSwitch Model 4289 allows access to any one of 4 separate fiber optic networks from one computer. Pushbutton switching eliminates need to plug/unplug fiber optic patchcords, minimizing connector wear. All 4 network ports are 1300 nm, 100 Mbps ST multimode fiber optic ports, and internal circuitry ensures isolation between networks/devices. LED display indicates switch position and fiber link presence.

Fluid Energy Aljet    Telford, PA 18969
Jan 05, 2007 Suited for biotechnology and pharmaceutical powder processing applications, 00 Jet-O-Mizer is available with High-Yield® Collection Module upgrade, which collects 98% of compounds processed during jet milling. Module is self-contained and operates pneumatically using same compressed air or gas that runs jet mill. Capable of processing batches from 1-50 g, collection container comes equipped with Dacron filter or optional PTFE filter.

Abtex Corp.    Dresden, NY 14441-0188
Jan 05, 2007 Employing three 10 in. brushes per head, Tri-Ten Series is capable of deburring both sides of flat part in one pass, without flipping it, via use of dual magnetic conveyors. Third conveyor passes parts into degausser for demagnetization. Base system design can be expanded to include application-specific auxiliary equipment. For non-ferrous parts, systems can be designed using alternate part fixturing methods.

Elma Electronic Inc.    Fremont, CA 94538
Jan 05, 2007 Offered in 1-10 wide options, lightpipes feature LEDs that transfer light to front panel with translucent coloration. Products are available in protruding styles or versions that are mounted flush with front panel. Capable of emitting light even when embedded deeper within panel, lightpipes have chamfered light coupling area that allows other LEDs to emit light perpendicular to circuit board. Combinations of single, dual, vertical, and horizontal configurations are available.

TE Connectivity Ltd.    Berwyn, PA 19312
Jan 05, 2007 Accepting RJ45 inserts for Ethernet communication applications, Series 45 is designed for Category 5 and 5e cable. Positive lock coupling provides reliable connections, while protective cap can be used to cover receptacles when not in use. Featuring IP67 sealing, RoHS-compliant connector is suitable for industrial machinery, diagnostics equipment, printers, and other locations where ruggedization and environmental sealing are necessary.

Control Co.    Houston, TX 77258 8307
Jan 05, 2007 With range of -99.9 to 199.9°C and 0.1° resolution, Traceable® -100.0 RTD Platinum Freezer Thermometer is suitable for monitoring temperatures in freezers, water baths, heating blocks, incubators, and refrigerators. Ten foot micro-cable permits freezer doors to close on it without affecting seal. Operating on 9 V battery, thermometer is supplied with 100 W triple-purpose platinum probe for liquids, air/gas, and frozen material.

American Sensor Technologies, Inc.    Mt. Olive, NJ 07828
Jan 05, 2007 Through utilization of Krystal Bond Technology, Model AST4800 incorporates one-piece stainless steel sensing element that is free of silicone oil, welds, or O-rings, eliminating chance of contamination from outside media. Unit features temperature range of 4-220°F and operates over pressure ranges of 0-500 and 0-10,000 psi. With overall length of less than 2 in. and diameter of 0.7 in., sensor delivers 10 mV/V output with response time of less than 1 msec.

Network Instruments LLC    Minneapolis, MN 55426
Jan 05, 2007 Aggregator nTAPs provide visibility to both sides of full-duplex data stream and aggregates them into single flow, giving administrators flexibility when connecting to analysis and security devices. Available in 256 and 512 MB models, each unit supports 10, 100, and 1,000 MB network traffic and connections. Transparent devices are resistant to hack or virus attacks, and administrators can monitor links without data stream interference.

Ethernet Direct    Newburyport, MA 01950
Jan 05, 2007 Supporting both gigabit SX and LX or flexible SFP form factor, Husky Series 10-port Managed Ethernet Switches can be remotely configured via web browser, SNMP, Telnet, CLI, or menu-driven management system. X-ring self-recovery mechanism allows switches to self-reconfigure and provides redundant path in network in case any part of network is disrupted or disconnected. IP security function supports 10 IP address accounts to prevent unauthorized access.

Laird Technologies    Chesterfield, MO 63017
Jan 05, 2007 Recyclable Clean Copper products are copper-based shielding gaskets that offer beryllium-free EMI shielding solution for use in slotted applications. Stability and tensile strength provide optimal thermal and electrical conductivity as well as elasticity. Suitable for grounding and shielding applications at rates comparable to metal EMI shields, products are RoHS-compliant and alleviate environmental, safety, and segregation concerns.

AMETEK Spectro Analytical Instruments Inc.    Mahwah, NJ 07430
Jan 05, 2007 Comprised of optic, readout system, power distribution, rechargeable battery, and cleaning system, hand-held iSORT provides on-site identification and analysis of iron, nickel, titanium, aluminum, copper, and cobalt metals without manual operator intervention. Intelligent ICAL calibration software controls instrument status independently from external influences. Applications include incoming quality control, material testing in production, and material failure analysis.

Thermo Electron Corp.    Waltham, MA 02454
Jan 05, 2007 HAAKE OS mobile docking station enables integration of existing measuring adapters into HAAKE PolyLab OS torque rheometer platform, allowing protection of established measuring procedures. Docking station features temperature control for up to 4 heating zones including air cooling. Incorporating CAnopen Bus for connectivity, rheometer automatically identifies peripheral devices in MS windows software, with remote supervision and service support.

ESI Group    Bloomfield Hills, MI 48304
Jan 05, 2007 Available on Windows 64-bit OS, Visual Environment platform offers engineering simulation solution based on openness and extended interoperability with tier CAE solutions. Engineers can work interactively with models of over 4.5 million finite elements, which require 3-4 Gb of memory. Within platform, different simulation domains can be addressed and chained manually or automatically, while Visual Composer keeps track and offers interoperability between CAD geometry and compute models.

Basler AG    Ahrensburg 22926  Germany
Jan 05, 2007 With line rates to 140 kHz at 2k or 4k pixel resolution, sprint series cameras are designed to optimize efficiency of imaging applications. Features such as area of interest (AOI) capability with linear speed increase, shading correction, and Line Sum function lend to operational flexibility, while 10 x 10 µm pixel size optimizes sensitivity. Also included, camera features Camera Link interface and compact housing that improves image quality by providing optimized sensor alignment.

Chart Industries, Inc.    Cleveland, OH 44124-4031
Jan 05, 2007 Suitable for applications involving high temperature and large temperature differentials, WPX Welded Plate Heat Exchanger can cover 6,000 square meter surface area and reach pressures up to 1,015 psi. Heat transfer elements allow minor local movements to relieve thermal stresses. Cross-counter-flow heat transfers through corrugated stamped sheets designed to optimize transfer coefficients. Heat exchanger is suited for variety of boiling, condensing, or single-phase flow regimes.

Basler Vision Technologies    Exton, PA 19341
Jan 05, 2007 Adhering to GenICam standards, modular camera series includes 18 GigE Scout cameras and 12 GigE Pioneer cameras, both with similar mechanical housings and common API so they may be integrated and interchanged based on application. Pioneer models are equipped with sensors ranging in size from VGA to 5 megapixels and allow users to choose resolution. Progressive scan sensors from Kodak and Sony offer fast readout times and are suited for use with Gigabit Ethernet interface.