Xilinx, Inc.    San Jose, CA 95124 3400
Feb 02, 2007 ChipScope(TM) Pro v9.1i inserts logic analyzer, bus analyzer, or virtual I/O low-profile software cores directly into design, allowing capture and viewing of any internal signal or node through programming interface. Suited for debugging high-speed serial I/O designs in Virtex-5 LXT FPGAs, software captures signals up to 500 MHz, which can be analyzed through ChipScope Pro logic analyzer. Optional ChipScope Pro Serial I/O Toolkit v9.1i is available.

Berkeley Nucleonics Corp.    San Rafael, CA 94901
Feb 02, 2007 Suited for use in Health Physics, Law Enforcement, and Homeland Security industries, SAM Defender consists of isotope identifier designed in response to publication of ANSI 42.34, while SAM Revealer uses Lanthanum Bromide scintillator detectors. Ethernet connection, CompactFlash card, or RS-232 enable data storage, archive, or transfer. Lightweight enclosure is ergonomically designed for single-hand operation in downrange or hot zone environments.

6th Sense Analytics    Morrisville, NC 27560
Feb 02, 2007 Allowing users to collect software development data, 6th Sense Analytics Software delivers immediate insight into physically distributed software development projects. It offers pre-built reports and dashboard-style user experience that provides access to actionable information about systems, teams, and individuals comprising development projects. Users can also create over 5,000 custom reports to achieve understanding of investments, trends, and performance of project.

Faronics Technologies USA Inc.    San Ramon, CA 94583
Feb 02, 2007 Available for Windows and Mac, Power Save enables central management of energy consumption throughout enterprise. Administrative options are provided for customizing installation package to suit needs of specific environments, including frequency of action as well as time of day and what day(s) action will occur. Able to match computer energy consumption with activity level of user, solution can also generate reports outlining enterprise-wide consumption levels.

Lantronix, Inc.    Irvine, CA 92618
Feb 02, 2007 Consisting of miniaturized communications subsystem, XPort® Direct(TM) embedded device gateway is designed for applications that need to move commands, status, and information over IP networks or Internet, to or from remote devices. Unit is mounted onto device manufacturer's PCB, enabling drop-in network connectivity. XPort Direct is suited for products requiring access to critical time-sensitive information such as temperature conditions, inventory updates, and machine status.

Cat Lift Trucks    Houston, TX 77081
Feb 02, 2007 Electric, counterbalanced ES3000 - ES5500 Series Stand-Up End Control Lift Trucks feature transistorized Cat MicroCommand(TM) AC drive and hydraulic control systems. They offer electric power steering, low step height, and knee, hip, and elbow padding to help minimize operator fatigue over long shifts. Visibility through mast and around overhead guard legs combined with multifunction control handle makes series suited for loading trailers or working in rack applications.

Emerson Network Power    St. Louis, MO 63136
Feb 02, 2007 Featuring high-speed, switched fabric interface, Model KAT4000 provides dual 10-Gigabit Ethernet channels. Configurable, PICMG 3.1 ATCA blade offers separate control/management and data planes, each with its own independent switching capability and ATCA fabric connection. Data plane utilizes Gigabit Ethernet to connect each AdvancedMC site to on-board switch, and dual 10-Gbit/sec Ethernet channels to link switch with ATCA's 10-Gbit/sec high speed fabric.

Makino Machine Tool Co.    Mason, OH 45040 9695
Feb 01, 2007 Equipped with WireWIZARD(TM) CNC and EZ-Cut(TM) advanced machining technology, Model SP43 handles workpieces up to 1,760 lb and uses wires from 0.004-0.012 in. dia. With HEAT High Energy Applied Technology, machine minimizes cutting times while holding tolerances of straightness to 0.0005 in. with 1 pass and 0.0002 in. with 2 passes. Results are achieved in poor flushing conditions, non-sealed nozzle applications, on uneven surface thicknesses, and on parts up to 6 in. tall.

L.J. Star, Inc.    Twinsburg, OH 44087
Feb 01, 2007 Used to connect ferrules in sanitary process applications, SH Style Safety Clamp features swing bolt that cannot come off fork of clamp due to vibration and temperature cycling, and cannot unlatch while under pressure or before wing-nut has been sufficiently loosened. Standard in 316 SS, clamp incorporates 2-pin hinge for uniform compression on gasket. It is available for tube OD sizes from 1/2-4 in., and is available with standard or ergonomic wing nuts, or various hex nut options.

Sunnex, Inc.    Natick, MA 01760-1314
Feb 01, 2007 Designed for machines with loads from 100-12,000 lb that do not need to be fastened to floor, M-Series anti-vibration mounts resist fatigue from fast working cycle times and strong lateral forces. Design minimizes noise and reinforced, built-in leveling bolt support cup distributes machine loads to support points within mount. Vertical/horizontal forces are dampened out by chemically resistant nitrile pad.

Control Co.    Houston, TX 77258 8307
Feb 01, 2007 Programmable in .01-99.99 sec, 1-9,999 min, or 1-9,999 hr intervals, Model 1 Walkaway(TM) Turn-off Controller counts up and turns any piece of equipment off at end of set time period. Model 2 Walkaway Repeat Turn-on/Turn-off Controller, programmable for 1-99 sec/min/hr intervals, counts up and turns any piece of equipment on for programmed time and off for different programmed time. Repeat feature continues cycling until manually stopped. Both models are NIST Traceable®.

Schmersal Inc.    Tarrytown, NY 10591
Feb 01, 2007 Designed to speed installation of emergency cable-pull switches, Series S900 features on-board wire clamp and anti-slip design to minimize need for readjustments. It requires only single tool to secure wire clamp and for adjustment of tension screw. Unit includes C hook, which slips onto ring of cable-pull switch. Should switch need to be replaced, Series S900 can be removed from switch by releasing tension.

Renco Encoders, Inc.    Goleta, CA 93117
Feb 01, 2007 Featuring custom LED and CMOS sensor arrangement, Model RCML15 provides signals for brushless motor commutation as well as incremental position feedback in .350 in. profile design. Slide/gap mechanism facilitates installation, while ±20° rotation of encoder aligns commutation signals with motor poles. Available in various resolutions up to 4,096, unit features frequency response of 500 kHz and provides commutation for 4, 6, 8, and 10 pole brushless motors.

Sealant Equipment & Engineering, Inc.    Plymouth, MI 48170-0965
Feb 01, 2007 Designed with Snuf-Bak(TM) valve nested in hanging bracket assembly, Model 2200-972-001 provides precision shot dispensing of 1-component materials horizontally onto exterior surface or into product interior. Volume dispensed is determined by shot-meter, timer control panel, or trigger-on time. Featuring manually operated electric trigger and ¼ in. NPT outlet, valve is suited for viscous materials such as silicones, polyurethanes, greases, adhesives, and sealants.

Toshiba Teli America, Inc.    Irvine, CA 92618
Feb 01, 2007 Equipped with Kodak® KLI-4104 image sensor, Model CSL8000CL provides 12 K pixel resolution and can be commissioned to digitally output both 8-bit color and 8-bit/10-bit monochrome images simultaneously. Pixel rate of 80 MHz yields line rates up to 37 Hz. Featuring CameraLink interface, camera facilitates high-speed applications such as web inspection, analysis of circular or rotating objects, 2-D barcode reading, and OCR, as well as silicon wafer and PCB inspection.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Feb 01, 2007 PICkit(TM) Serial Analyzer enables design engineers to interface with circuits embedded deep within serial systems using any Windows®-based PC. It features 28-pin demo board with PIC16F886 Mid-Range 8-bit microcontroller, and GUI software allowing communication between PC and several industry-standard serial protocols on microcontroller tested, including I2C(TM), SPI, and USART. Source code and MPLAB® IDE integrated development environment are also included.

ICS Electronics Corp.    Pleasanton, CA 94588
Feb 01, 2007 Providing 256 parallel I/O lines that can be configured as inputs or outputs in 8-bit bytes, Model 4813H consists of 2-board set that interfaces devices with TTL, CMOS, or other digital signals to GPIB bus. I/O lines can be controlled as individual bits, or data can be transferred directly to or from specific byte, or by strings of data characters to multiple bytes. Transparent mode lets Model 4813H output high-speed binary data to multiple bytes.

Pickering Interfaces    Wobum, MA 01801
Feb 01, 2007 Software-configurable Model 40-612 supports 1- or 2-pole configurations with isolation relays. Configurations vary from single-pole, 128-way MUX to 8 banks of 8-channel, 2-pole MUX. Supporting 2-pole configurations, Model 40-613 also features software-controlled architecture that allows configurations from 2-pole, 64-way MUX to 16 banks of 4-channel MUX. Both use electromechanical relays rated for 220 Vdc/250 Vac and 2 A hot or cold switching.

Linear Technology Corp.    Milpitas, CA 95035
Feb 01, 2007 Comprised of 2 independent, high-side current sense amplifiers, Model LTC6103 provides max output of 1 mA and operates from 4-60 V with absolute max voltage of 70 V. It features max input bias current of 170 nA and max input offset voltage of 450 µV. With response time of 1 µsec, device is suited for automatic power shutdown when sensing fault conditions. Gain for each device is set by 2 precision resistors, which allow for accuracy better than 1%.

Dynabrade, Inc.    Clarence, NY 14031
Feb 01, 2007 Wet Deburring Station helps reduce potential flammability of materials in workplace while grinding. Using wet filtration system, system captures and entraps potentially combustible filings and dust in air/water mixing zone. Hose drain port allows slurry material to be drained with connection of standard garden hose. Weighing 100 lb, 21 x 20 x 36 in. station can be placed on countertop or in cart for station-to-station portability.