Pickering Interfaces    Wobum, MA 01801
Feb 01, 2007 Software-configurable Model 40-612 supports 1- or 2-pole configurations with isolation relays. Configurations vary from single-pole, 128-way MUX to 8 banks of 8-channel, 2-pole MUX. Supporting 2-pole configurations, Model 40-613 also features software-controlled architecture that allows configurations from 2-pole, 64-way MUX to 16 banks of 4-channel MUX. Both use electromechanical relays rated for 220 Vdc/250 Vac and 2 A hot or cold switching.

Linear Technology Corp.    Milpitas, CA 95035
Feb 01, 2007 Comprised of 2 independent, high-side current sense amplifiers, Model LTC6103 provides max output of 1 mA and operates from 4-60 V with absolute max voltage of 70 V. It features max input bias current of 170 nA and max input offset voltage of 450 µV. With response time of 1 µsec, device is suited for automatic power shutdown when sensing fault conditions. Gain for each device is set by 2 precision resistors, which allow for accuracy better than 1%.

Dynabrade, Inc.    Clarence, NY 14031
Feb 01, 2007 Wet Deburring Station helps reduce potential flammability of materials in workplace while grinding. Using wet filtration system, system captures and entraps potentially combustible filings and dust in air/water mixing zone. Hose drain port allows slurry material to be drained with connection of standard garden hose. Weighing 100 lb, 21 x 20 x 36 in. station can be placed on countertop or in cart for station-to-station portability.

SNK America Inc.    Elk Grove Village, IL 60007
Feb 01, 2007 Intended for small parts turning, Prodigy GT-27 provides spindle speeds to 6,000 rpm and uses 3 axes of motion that can be commanded in absolute or incremental modes. C-axis spindle allows for indexing and positioning as well as interpolation and polar coordinate milling. Polymer composite base minimizes vibration and is resistant to oxidation and thermal distortion. With max production bar work up to 1 1/16 in. dia, lathe is suited for first and secondary machining in variety of applications.

ADAMS Magnetic Products, Co.    Elmhurst, IL 60126
Feb 01, 2007 Nickel-coated Neodymium Magnets are Neo grade 3512 with 0.030 in. foam adhesive on one side. Units are available in disc sizes from 0.250-1.000 in. diameter as well as rectangular versions measuring 0.055 x 0.500 x 1.00 in. Suitable for variety of surfaces, magnets provide strength of mechanical closures and fasteners with mobility of temporary hangers. Optional strike plates are available for magnet-to-magnet or magnet-to-metal connections.

Dapra Corporation    Bloomfield, CT 06002
Feb 01, 2007 Toroid Cutting Tools include 12 Shell Mills in ODs from 2-8 in. and come with round, square, high-feed, and octagonal insert geometries for optimal application versatility. Octagonal Inserts have 8-sided geometry for general face milling capabilities. Their 45° lead angle promotes feed capacity for face milling, profiling, helical interpolation, and chamfering.

Parker Hannifin Corp., Seal Group O-Ring Div. (ORD)    Lexington, KY 40509
Feb 01, 2007 Functional in temperatures to +350°F, fluorosilicone seal materials LM158-60, LM159-70, and LM160-80 are resistant to petroleum-based oils, greases, and fuels. They are formulated to exhibit short-term rebound resilience and meet aerospace and automotive application requirements. Able to be used in fire-resistant synthetic hydrocarbon hydraulic fluids in static applications, materials minimize tearing of O-rings during installation and promote use of automated assembly.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Feb 01, 2007 Agilent E5910A provides collaborative solution for testing and optimizing high-speed serial links implemented with Xilinx RocketIO multi-gigabit transceivers in Virtex-4 and Virtex-5 Platforms. Used by those facing system-design challenges associated with migration of traditional parallel digital buses to gigabit-speed serial bus structures, software provides analysis environment for BER testing, graphical margin analysis via eye mapping, and automatic link tuning for optimal BER.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Feb 01, 2007 Used for analysis of receivers in PCB environment, Agilent N4916A enables characterization and subsequent loss compensation for gigabit speed ports and channels that operate with de-emphasized signals. Device covers data rates up to 13.5 Gbps and can test sensitivity and jitter tolerance of receiver under ideal and worst-case signal conditions. Characterization and stress test accuracy results from injecting de-emphasized signal with variable post-cursor in 0.5 dB steps.

Kubota Tractor Corporation    Torrance, CA 90503
Feb 01, 2007 Utility-class, 8 ton Kubota KX080-3 has diesel engine that drives 14,660 lb of bucket force and 8,554 lb of arm crowd force, and incorporates auto-idling system that adjusts engine rpm to help reduce noise and exhaust emissions. Excavator automatically downshifts into low when making turns or moving on soft earth, and 3-pump, load-sensing hydraulic system enables users to perform simultaneous operations, such as dozing and using front attachments, without losing speed.

Bluebeam Software, Inc.    Pasadena, CA 91103
Feb 01, 2007 Along with support for MS Windows Vista® and Office 2007, Bluebeam® PDF Revu® v5.0 provides tools needed by those in AEC (Architecture, Engineering, Construction); Government; Legal; and Financial industries. Program can automatically compare 2 PDF drawings and highlight differences between them. In addition to PDF redaction, Bates Stamping, and automatic document comparison, software offers rotating markups, markup summary reports, headers and footers, and PDF batch capabilities.

Rabbit Semiconductor    Davis, CA 95616
Feb 01, 2007 Powered by 58.98 MHz Rabbit® 4000 microprocessor, Model RCM4200 features quadrature encoder, 10/100 Ethernet connectivity, 35 GPIO lines shared with up to 5 serial ports, and 4 levels of alternate pin functions. Operating from -40 to +85°C, module has 8 MB on-board serial flash memory for remote data storage and optional 8-channel analog input for interfacing to variety of sensors. Unit is suited for embedded control, remote device monitoring, and serial-to-Ethernet communications.

EXAIR Corporation    Cincinnati, OH 45249-1621
Feb 01, 2007 Producing stream of 20°F air, High Power Cold Gun is suitable for continuous use without possibility of freezing up. Stainless steel vortex tube converts ordinary supply of compressed air into cold air, while flexible ball and socket hose directs cold air to point where heat is generated. Eliminating filtration, clean-up, and disposal of liquid coolants, gun is suited for laser cutting, tool sharpening, drill and cutter grinding, milling, drilling, and band sawing.

Flo-tech, Div. of Racine Federated Inc.    Racine, WI 53404
Feb 01, 2007 To avoid consuming too much power, MR Flow Transmitter activates only portions of Anisotropic Magnetoresistive array electronics in systematic way. Microprocessor individually selects and reads output voltage of 7 AMR sensors. Signal is then routed through multiplexing circuit, instrumentation amplifier, low pass filter, and A/D converter built into microprocessor. Based on readings, microprocessor determines absolute position of magnet inside flow meter and calculates flow rate.

e frontier    Scotts Valley, CA 95066
Feb 01, 2007 Run under Windows 2000/XP, MotionArtist v4 enables businesses to create banner ads, website designs, presentations, and other Flash(TM) animations. Included content library features 1,500+ ready-to-use animations, characters, backgrounds, borders, buttons, and special effects. In addition to wizards and templates, software facilitates design process with editable timeline, drag-and-drop layout control, and browser preview capabilities.

ALM Works Ltd.    St.Petersburg 197342  Russian Federation
Feb 01, 2007 By downloading issues from JIRA and storing them in local cache, JIRA Client v1.0 allows users to view and edit issues regardless of server's availability. Program offers search capability with Boolean logic processor, which allows users to build any combination of filters, grouped by AND, OR, and NOT operations. Each downloaded query is displayed along with issue counter, showing number of issues that pass query's filter and providing immediate perspective on project state.

Fourth World Media Corp.    Los Angeles, CA 90031
Feb 01, 2007 WebMerge v2.4.2 generates static Web pages from database or spreadsheet data. Using tags in templates created with any HTML authoring tool, program makes new page from data in each record of exported file, and can create index pages with links to each detail page. Generated pages can be hosted on any Web server without specialized database hosting solution. Mac version is available in Universal Binary format for native performance on Intel-based Macs as well as older PowerPC models.

ALECO    Muscle Shoals, AL 35661
Feb 01, 2007 Able to be custom made to end-user specifications, ImpacDors® come in varieties suited for light- to heavy-duty industrial, commercial, or institutional applications. Fully insulated and gasketed FD-175 is semi-flexible, full-thickness door with rubber sub-frame and full-height-reinforced spine. Designed to safely withstand harsh industrial environments, Magna ImpacDor features heavy-duty grey opaque lower panels and crystal clear upper portions.

SKF USA, Inc.    Lansdale, PA 19446
Feb 01, 2007 Used in variable-speed electric motors, SKF® hybrid bearings with silicon nitride rolling elements and steel rings eliminate electric arc bearing damage and resulting premature bearing failure. Density minimizes centrifugal force and friction, while hardness promotes wear resistance. Degree of inelasticity provides stiffness and minimizes deflection under load. Depending on bore size, cages are glass fiber-reinforced polyamide or pressed steel.

American Power Conversion    West Kingston, RI 02892
Feb 01, 2007 Placed next to heat source in data centers and small computer rooms, InfraStruXure® InRow(TM) RP supports power densities up to 70 kW per rack when used with hot air containment systems and comes in chilled water- and refrigerant-based designs. Varying cooling capacity with heat load requirements conserves energy during partial load conditions, and integrated humidifier provides room-level moisture control. Control algorithm enables real-time capacity monitoring.