Fairchild Semiconductor Corp.    South Portland, ME 04106
Feb 12, 2007 Supplied in 8-pin DIP packaging, RoHS-compliant FOD3180 and FOD3181 turn power MOSFET on and off to limit power dissipation. Both offer 200 ns (max) rise/fall time rate and are capable of driving up to 30 A/1,200 V in industrial applications. Respectively, FOD3180 and FOD3181 feature 2 and 1.5 A peak output current values. Additional shared features include 5,000 V isolation rating, undervoltage lockout, and coplanar construction with fail-safe insulation.

Eaton Hydraulics    Eden Prairie, MN 55344
Feb 12, 2007 Offered in two series, A-frame Global Gear Pumps (GGPs) feature 12-tooth gear design that exhibits minimal noise and low-pressure ripple. Products operate at 4,000 psi and are available with SAE, DIN, and ISO flanges, shafts, and ports. While AEG Aluminum Series has floating bushing, pressure-balanced design with extruded aluminum body and cast iron end cap and mounting flange, AEK Cast Iron Series has fixed bushings, pressure-balanced design with all-cast iron construction.

Sensaphone    Aston, PA 19014
Feb 12, 2007 Equipped with 8 external inputs, Sensaphone 800 helps protect equipment and facilities by alerting up to 8 individuals to changes in critical environmental conditions via customized voice phone calls. Standalone system monitors operating conditions such as temperature, power supply, alarms, excess humidity, water on floor, and intrusion. Along with nonvolatile memory, system offers programmable relay output, 24/7 operation, and phone line seizure features.

NKE AUSTRIA GmbH    Steyr A - 4407  Austria
Feb 09, 2007 Made from clean bearing steel, Single-Row Cylindrical Roller Bearings are available 164 sizes in design variants NU, NJ, and NUP. Bearing cages are offered in roller-guided and outer ring-guided versions and are made from brass and polyamide. Optimized geometries of raceways and rolling elements maximize loading capacity, while modified cage design facilitates formation of lubricant film. Misalignments can be compensated through modified contact geometry and crowned inner raceways.

Strategic Test Corporation    Woburn, MA 01801-1915
Feb 09, 2007 TRITON Development Kit-4 (TDK-4), based on 806 MHz Marvell XScale PXA320 processor, provides advanced power management for low-power embedded applications and is supplied with Windows CE v6.0 and Linux v2.6.17. Offered as complete development solution, product also includes 6 x 4 in. carrier board and TRITON-320 PXA320 SODIMM module with 128 MB SDRAM and 64 MB Flash memory. Connectivity includes Compact Flash, Ethernet, USB, serial and JTAG interfaces, and LCD and VGA connectors.

O.BERK Co.    Union, NJ 07083
Feb 09, 2007 Made of PET, Wide Mouth Ribbed Rounds are available in 64, 96, 120, and 128 oz sizes, each with 100/400 finish, as well as 64 oz squat container with both 100/400 and 110/400 finishes. Rounds can be labeled and silk-screened, and are available in colors with quantity purchase. They are suited for pickles, pretzels, nuts, screws, chemicals, detergent, and other bulk/warehouse store items.

Beaver Brand    Waukee, IA 50263
Feb 09, 2007 Made from die-cast, electroplated metal and fitted with 88% carbon steel blades, Clip-On Pencil Sharpeners clip to any tool belt. Spring steel belt clip provides solid foundation for one-handed sharpening. Sturdy enough to withstand heavy daily use, sharpeners are available for both standard and carpenter pencils and are useful for all tradesmen, from construction workers to weekend handymen.

Parker/Texloc Div. of Parflex    Fort Worth, TX 76106
Feb 09, 2007 Designed with colored stripe down entire length, Colortrax(TM) Tubing provides instant, positive identification of lines without obstructing view of media. Colortrax(TM) bonds fluoropolymer to fluoropolymer, providing resistance to rub-off, chemical attack, and heat deterioration. Pigmented fluoropolymer is confined to tubing's outer wall, avoiding risk of contaminating fluids inside. Available in PTFE, FEP, and PFA, tubing comes in 10 striping colors and in sizes up to 1 in. OD.

JNJ Industries Inc.    Franklin, MA 02038
Feb 09, 2007 Lead-Free Solder Paste Remover, composed of aliphatic glycol ethers, isopropyl alcohol, and DI Water, can be used with any type of solder paste to clean stencils, screens, misprinted boards, tools, benches, and machinery. Characterized by mild odor, RoHS-compliant solution dries residue-free and does not require rinsing. Product can also clean or remove uncured SMT chip bonder type epoxies. It comes in saturated wipes, 1 pint trigger sprays, gallons, and 55 gal drums.

JP Sercel Associates, Inc.    Manchester, NH 03102
Feb 09, 2007 To meet control and programmability challenges faced during micromachining and wafer processing with lasers at sub-micron precision level, JPSAControls32 System Control Software provides engineer-level user interface that offers complete control of all system devices and software components. Windows-based software offers system configuration editor, CAD file translation, and Wafer Scribing Macro Builder. Program provides setup and control of all stages of motion.

OK International    Garden Grove, CA 92841
Feb 09, 2007 Using Thermal Tweezers Nozzles, engineers can remove devices such as multiple vertically stacked ICs without damaging IC packages and without exposing PCB to excessive reflow cycles. Units allow heat to be confined to localized area of stacked solder joints, preventing total PCB from reaching reflow temperatures. Operating at 200°C, nozzles are also suited for use with glob-top encapsulated die, small components, and fine pitch plastic connectors.

IXXAT Automation GmbH    Weingarten D-88250  Germany
Feb 09, 2007 Powerlink Starter Kit contains Controlled Node, which consists of basic board with Phytec microcontroller module and Powerlink FPGA module, Managing Node PC card as well as software packages and drivers. Powerlink FPGA module serves as universal Powerlink interface for microcontroller module, on which corresponding host application can be developed. Based on Windows driver API, Windows-based applications for data exchange with Powerlink module and embedded application can be created.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Feb 09, 2007 Available in several impact force sizes, pneumatically actuated Series IPV is suited for use with products that are sticking in elbows and joints due to high humidity content. Units have magnetic tripping action and provide spring return to normal position.

Anchor Industries    Columbia, SC 29209
Feb 09, 2007 Custom sized stainless steel pass-through cabinets feature self-locking stainless steel and glass doors on each side that allow supplies to be restocked from one room while doors into sterile area remains locked. When supplies are obtained in sterile area, only door in cleanroom may be opened. This allows users to obtain supplies while keeping door to restocking area in locked position to prevent compromise of sterile environment.

Harwil Corp.    Oxnard, CA 93030
Feb 09, 2007 Fit into existing pipes or offered in PVC Tees, TS-1N and TS-1CR can signal computer to activate electrical response when fluids reach critical temperature settings between -20 and +200°F. Model TS-1N works with water, salt water, mild acid, and base solutions, while TS-1CR suits more corrosive materials. There are 4 available electrical connection options, and high/low temperature sensitive switches can be customized to specifications.

Telegartner, Inc.    Franklin Park, IL 60131
Feb 09, 2007 Fully RoHS-compliant Termination Loads, offered in 7/16 DIN, N, TNC, BNC, SMA, and R-SMA series, are available with power handling capabilities from 1-625 W and frequency ranges from dc to 18 GHz. Products with power handling capability up to 10 W are used primarily in mobile communications applications. Specifically designed for use in radio broadcasting transmission stations, 625 W Termination Load requires external heat sink.

Linear Technology Corp.    Milpitas, CA 95035
Feb 09, 2007 Housed in 3 x 3 mm QFN package, Model LT3482 delivers output up to 90 V from inputs ranging from 2.5-16 V. Fixed-frequency, current mode unit features high side APD current monitoring, which offers better than 10% relative accuracy over -40 to 85°C temperature range. Internal 48 V, 280 mA switch uses voltage doubler to deliver voltages as high as 90 V. Constant frequency architecture minimizes switching noise and is user selectable at 625 kHz or 1.1 MHz.

Tripp Lite    Chicago, IL 60609
Feb 09, 2007 Power Distribution Units feature digital load meters that display total current drawn by connected equipment. Four models include dual power inputs with automatic transfer switch functionality, and 2 of those add IP-based remote monitoring/control for remote reboot and user-defined load ramping/shedding. Supporting 19 in. rack, wall, raceway, workbench, and under-counter installation, metered PDUs are suited for powering multiple equipment loads in variety of applications.

Master Bond, Inc.    Hackensack, NJ 07601
Feb 09, 2007 Suitable for use in both thick/thin sectioned configurations, EP21TDC-2LO bonding, sealing, coating, and encapsulation system has thermal conductivity of 9 BTU/in./ft²/hr/°F and volume resistivity of 1,012 Wcm. With service operating temperature range of 4 K to 250°F, room temperature curable product features Shore D hardness of 36, elongation of 50%, 1:3 mix ratio by weight or volume, working life of 90 min for 100 g mass, tensile strength of 1,070 psi, and T-peel strength of 15 pli.

Modern Industries, Inc. (mPower)    Erie, PA 16512
Feb 09, 2007 Suited for tooling, fixturing, and assembly applications, SpeedLoc(TM) precision locator/fastener system is comprised of alloy fastener that secures precision receiver and locator. Design uses fastening device itself to mechanically extract precision locator from its receiver, facilitating separation of fixture plates, tooling, and accessories. System features quick location and repeatability of ±.0004.