Centillium Communications, Inc    Fremont, CA 94539-7828
Feb 14, 2007 Mustang(TM) 300 system-on-chip (SoC) is suited for service providers deploying Ethernet Passive Optical Networks (EPON) in customer premise equipment (CPE), enabling the delivery of Triple Play services such as bandwidth-intensive IPTV. Integrating all packet buffer and program memories in one package, this fiber-to-the-home (FTTH) solution supports traffic management, classification, and filtering for up to 256 multicast groups and up to 8 service types.

S-B Group    Fenton, MO 63026
Feb 14, 2007 Designed to fit onto any 3/8 in. reversible corded or cordless power drill, RiveDrill(TM) allows operator to set up to 14 rivets/min. Model RT120HP is intended for heavy-duty blind rivets, while Model RT110 is for standard blind rivets, and Model NT850 is for rivet nuts. Requiring 6.6 lb of pressure to operate, portable RiveDrill is suited for automotive, small aircraft and boat repair, as well as general facility maintenance and repair.

Vicor Corp.    Andover, MA 01810 5424
Feb 14, 2007 Featuring input range of 18-36 V, mid-power Mini DC-DC converters incorporate low- noise, zero-current and zero-voltage switching. Devices measure 2.28 x 2.2 x 0.5 in. with height above board of 0.43 in., and are available as 100 W model at 3.3 Vout, 150 W at 5, 12, 15, 24, 28, 36, and 48 Vout, and as 200 W model at 36 Vout. They are available in 5 environmental grades, with 6 different pin options and 3 baseplate options.

Eos Systems Inc.    Vancouver, BC V6J 14
Feb 14, 2007 PhotoModeler v6 enables accurate measurement of objects and can generate photorealistic 3D computer models. PC-based software includes shapes function for working with geometric solids and allows export of results into other software, including KMZ format for uploading textured building models into Google Earth. Printing and output options, automated camera library, and module for removing lens distortion are included.

Quicksilver Controls    San Dimas, CA 91773
Feb 13, 2007 Designed for company's NEMA 11, 17, and 23 frame direct drive servomotors, Silverdust IGF features DIN mountable design, 7 TTL level I/O (optional 24 V), RS-232/485 communications, and 32K nonvolatile memory for 2,000-3,000 lines of programming. Overvoltage- and reverse polarity-protected unit offers 3.5 A continuous output per phase and 4.5 A peak with adequate heat sinking or air flow. Regenerative braking circuit, single connector to motor, and on/off switch are also included.

S.I.E. Computing Solutions, Inc.    Brockton, MA 02301
Feb 13, 2007 Integrated into PCI Express bus, XP-9E enables support for applications requiring PCI cards in newer application servers that do not. This 4U, rackmount enclosure accommodates 8 full-size, PCI 2.3-compliant slots and one PCIe x4 slot, allowing users deploying PCI-based applications to adopt application servers based on their needs rather than number of available PCI slots. Access to PCI cards in XP-9E is completely transparent to application running on server.

RAE Systems    San Jose, CA 95134
Feb 13, 2007 Powered by rechargeable Li-ion batteries or standard alkaline batteries, QRAE II Toxic Gas Monitor is equipped with oxygen, combustible, carbon monoxide, and hydrogen sulfide sensors. Display can be electronically flipped to orientation of worker for handheld or belt-mounted operation. Certified for use in hazardous locations, IP65-rated device includes vibration, flashing LED, and 95 dB audible alarms to keep workers safe and aware in mix of environments.

NKK Switches    Scottsdale, AZ 85260-3420
Feb 13, 2007 Offered in LED-, neon-, or incandescent-illuminated as well as non-illuminated models, KB series features 12 mm dia body and 8 mm panel thickness mounting capability. Molded-in terminals lock out flux, dust, and other contaminants, while snap-action contact mechanism promotes contact reliability. Whether supplied with round, rectangular, or square cap, panel cutout is always round. Circuit options include single and double pole in momentary or alternate configurations.

Worldlabel.com Incorporated    Garrison, NY 10524
Feb 13, 2007 Infinity V1 RFID Tag and Inlay Embedding System converts RFID tags/inlays so that they may be embedded accurately into paper or film label, even when each production batch has varying size labels or requires different type of RFID tag to be embedded in different area of label. Along with online bad tag detection and removal system, machine features touch pad for operator entry of required length to ensure accurate insertion.

Carr Lane Manufacturing Co.    Saint Louis, MO, MO 63119
Feb 13, 2007 Chuck Jaw Master Plates are made in 3 sections that mount on chuck, and accept variety of machinable jaw segments. They are available for chucks with 10-60 in. dia, in standard height and extra-high versions. Made of aluminum alloy, mounting pattern is machined according to chuck specifications based on make and size.

Greenheck    Schofield, WI 54476 0410
Feb 13, 2007 With no tie-downs to roof, high-wind and hurricane exhaust fans feature structural bracing on interior and exterior of fan as well as high-wind roof curb. Models H-G direct drive and H-GB belt drive fans, designed for general exhaust applications, feature performance ranges up to 14,000 cfm and up to 2.75 in. wg. Suited for restaurants, models H-CUE direct drive and H-CUBE belt drive fans range up to 14,700 cfm and up to 5 in. wg.

Thermotron Industries, A Venturedyne, Ltd. Co.    Holland, MI 49423
Feb 13, 2007 DSX-8000 electrodynamic vibration system features 16 in. dia magnesium armature producing acceleration levels up to 120 G, and includes dynamic centering system with optical sensors to keep armature centered during travel. Air-cooled device supports payloads up to 1,000 lb with velocity up to 120 ips. It is controlled by VCS-3200 Vibration Control System with over 85 dB dynamic range, resolution up to 3,200 lines, and frequency range up to 3,000 Hz.

Telegartner, Inc.    Franklin Park, IL 60131
Feb 13, 2007 Offering alternative to SMA connectors, QLS Series enables connection without need for tooling. Locking mechanism ensures high butt contact force on outer conductor, which is normally only achieved with threaded coupling mechanism. Rated for greater than 200 mating cycles, connectors feature insertion force of 30 N and interface contact force greater than 200 N. With working voltage less than 500 V/50 Hz, units operate up to 6 GHz, or 18 GHz if attached to semi-rigid cable.

Rockwell Automation    Milwaukee, WI 53204
Feb 13, 2007 With ArmorConnect(TM) Power Media, manufacturers can establish secure connections to ArmorStart® Distributor Motor Controller, which offers plug-and-play design that eliminates need for specialized labor and tools. Since manual wiring is eliminated, assembly error is avoided. Three-phase power media accessories include cordsets, patchcords, tees, reducers, and power receptacles, while control power media accessories include cordsets, patchcord cables, t-ports, and receptacles.

Graco Inc.    Minneapolis, MN 55440
Feb 13, 2007 Designed for protective coatings and corrosion control applications, Xtreme® NXT(TM) Sprayer comes in 11 configurations, with 3 motor sizes and 7 lowers to choose from. Optional DataTrak(TM) monitoring system tracks and records volumetric flow and material usage, allowing contractors to spray specified amount of material for each job. System also indicates when it is time for routine maintenance, and automatically shuts off pump when coating material runs out.

Stellram    La Vergne, TN 37086
Feb 13, 2007 Offering high accuracy edge preparation, HARDCORE(TM) Technology Drills feature specially designed flute profile for optimal chip evacuation, and 140° point geometry produced to zero run out for minimized wear forces. Core carbide grade is resilient to handle slower speed of tool center, while grade of outer shell is wear resistant to match higher speed of tool's cutting edges. TiAlN structure Nano coating maximizes wear resistance and temperature diffusion.

Weldcraft    Appleton, WI 54911
Feb 13, 2007 All-in-one AK-150MF Kit allows operators to convert standard 17F or 17FV TIG torch into 20 different torch styles using existing cable. It includes 200 A/70° head, 200 A/180° head, 125 A/90° head, 125 A/180° head, and 80 A/90° head, as well as molded coil element, solid element, torch body without valve, torch body with valve, and ribbed handle. Removable head and coil combination unit eliminates multiple connection points to prevent overheating and high frequency leaks.

SKF Linear Motion & Precision Technologies    Lansdale, PA 19446
Feb 13, 2007 Controlled with desk, hand, or foot switches, SKF® TELESMART TMA/TMD series promote safe height adjustment for desks, tables, chairs, and industrial workstations. Type TMA pillars have 640 mm retracted length and 500 mm stroke, delivering push forces to 1,000 N at speeds to 55 mm/sec. With 550 mm retracted length and 700 mm stroke, Type TMD pillars achieve push forces to 800 N at speeds to 60 mm/sec. Dimensions of both types contribute to optimized workplace ergonomics.

DE-STA-CO Industries    Madison Heights, MI 48071
Feb 13, 2007 Designed for FDA, medical, and cleanroom applications, RPLC parallel gripper series features external components made from corrosion-resistant materials that optimize performance in de-ionized water. Internal components are lubricated with cleanroom-grade grease, while stainless steel stationary and non-contacting shields eliminate possibility of contaminants penetrating Dual-V roller bearings. Use of non-synchronous motion allows for independent jaw motion.

Rockwell Automation    Milwaukee, WI 53204
Feb 13, 2007 For global consistency of multi-branch circuit control, Bulletin 500LG(TM) electrically held lighting contactors are designed to meet UL508, cULus, IP1X/IP2X, and CE requirements. Each 30 A, multi-pole control device is RoHS-compliant, accommodates up to 12 poles, and displays important information - contact configuration and position - for each pole. Standard configuration and interchangeable coils lends flexibility for customization of lighting control systems.