C & M Corporation    Wauregan, CT 06387 0348
Jun 30, 2006 Capable of 2.5 gigabits per second data transfer rate while supporting up to 64,000 addressable devices, BluStreak(TM) cables and assemblies suit 10 Gigabit Ethernet, Serial Attached SCSI, high density data pipeline, and ultra high-speed server applications. Products also support 1X, 4X, and 12X link widths in 24-, 26- and 28-gauge wire. Assemblies use either HSSDC2 or MicroGigaCN(TM) style connectors, depending on link width, and meet InfiniBand® Trade Association standards.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Jun 29, 2006 Housed in 3 x 3 mm LLP® or MSOP package, 2- and 4-channel Digital-to-Analog Converters offer 8-, 10-, and 12-bit resolutions. They have typical settling times of 3-6 µsec over supply range of 2.7-5.5 V. Each has rail-to-rail output swing, uses external reference, and operates over -40 to 105°C. Interchangeable converters allow designers to develop single standard PC board layout that can support multiple devices for seamless upgradeability.

DDP Supply    El Segundo, CA 90245
Jun 29, 2006 Designed as direct replacement for incandescent bulbs, LS Series lamp-based LEDs feature built-in shunt resistors to reduce unwanted illumination caused by leakage current. Shock- and vibration-resistant lamps have 100,000 hr-rated life and operate on currents as low as 0.25 mA. Offered in standard (9 mm MB LED lamp) or custom assemblies, products are suited for industrial environments, power generation, transmission, and distribution applications.

Electroswitch, Unit Of Electro Switch Corp.    Weymouth, MA 02188 2913
Jun 29, 2006 Offered in 5 models, Series 31, 28, 25, 24, and 21, switches provide up to 16 positions and up to 75 poles and feature continuous ratings from 5-30 A at 600 V. Each switch has spring return to normal (vertical) position and shorting contacts. Along with fully enclosed decks and positive detent action, products feature silver-plated, blade-type, double-sided, double-wiping contacts. Input tap switch arrangement allows sequential connection to several lines using same switching deck.

Thomas & Betts Corp.    Memphis, TN 38125
Jun 29, 2006 Suited for raised-floor applications, Steel City® AFM-4R Round Access Floor Module fits in same size hole used for standard air-handling devices. It features stamped steel construction, 3 compartments with removable voltage dividers, and black polycarbonate cover with 2 access lids for cable entry. Designed to fit holes from 8¼ to 8¾ in. dia, module is secured by 2 thumbscrews. Minimum raised-floor depth of 6½ in. is required.

4D Technology Corporation    Tucson, AZ 85706
Jun 29, 2006 Temporal phase-shifting interferometer upgrade kit includes 4Sight(TM) wavefront analysis software, Windows XP system, frame grabber, ADC board, and PZT driver for devices no longer supported by manufacturers. The 4Sight software offers intuitive interface, customizable analysis and tests, 3D and graphical display capability, and interprogram cut and paste capability.

Keystone Electronics Corp.    Astoria, NY 11105
Jun 29, 2006 Equipped with flow-hole SMT solder tail, low profile Battery Clip is engineered to securely retain cells. Unit is made of .010 thick nickel-plated spring steel and withstands shock and vibration. Clip is available loose or on tape and reel with 500 pecies per 13.0 in. reel. Polystyrene carrier tape meets ANSI/E1A-481 standards, and is 24 mm wide with parts mounted on 16 mm pitch.

Olympus Industrial America, Inc.    Orangeburg, NY 10962
Jun 29, 2006 Featuring UIS optics, SZ and STM Series Microscopes offers broad range of illumination, from conventional white light and near infrared to deep UV and infrared. SZ Series Zoom Stereomicroscopes come in Greenough models for 3-D viewing and Galilean models with highly corrected optical systems and higher magnifications. Suited for inspecting large samples, STM Series Measuring Microscopes offer motorized focusing and high-rigidity body with integrated counters.

Rockwell Automation    Milwaukee, WI 53204
Jun 29, 2006 Allen-Bradley® Bulletin 800FD(TM) 22.5 mm Monolithic Push Button devices include pilot light and E-stop devices. Along with 45.7 mm back-of-panel profile, products feature silver-nickel contacts and leakage current tolerance up to 3 mA. E-stops incorporate 2 products into one, with push-pull and twist-to-release features in single operator. They also feature trigger action anti-tease. Pilot light lenses are optically enhanced for visibility in direct sunlight.

Eraser Company, Inc., The    Syracuse, NY 13221
Jun 29, 2006 Model WC601D can cut materials such as flexible polyurethane, flexible PVC, nylon reinforced hose, and rubber hose from ½ to 1 1/8 in. OD. Belt feed eliminates crushing of tubes along their length as well as on cut ends, while programmable batching feature can retain 99 programs in memory. Rotary cutting head consistently produces clean, square cuts that conform to tight specifications as required for medical applications.

Heidenhain Corp.    Schaumburg, IL 60173-5337
Jun 29, 2006 Equipped with movable faceplate, ERA 4000 series is offered with ODs from 52.65-331.31 mm and grating periods of 20, 40, or 80 microns. Low-profile ERA 4x80 version, mounted using centering collar method, offers accuracies from ±6.1 to ±2.8 arc sec. Weight reduced T profile version, ERA 4x81, is mounted using 3-point centering method and offers accuracies from ±8.6 to ±2.8 arc sec. Also available, ERA 4x82 uses 3-point centering method and offers accuracies from ±5.1 to ±2 arc sec.

TDK-Lambda Americas Inc.    San Diego, CA 92154
Jun 29, 2006 Rated 500 W, LZSa500-3 features active power factor correction and accepts input from 85-265 Vac, 47-440 Hz. It is available with 24 V output, adjustable from 18-29.4 V, and can provide full load of 21 A output current from -40 to +60°C. Supplied in 4.25 x 4.75 x 10.25 in., RoHS-compliant package suited for harsh environments, product features remote on/off, user-adjustable over-voltage protection, remote resistance or voltage programming, and 200 kHz synchronization signal.

Hilti Inc.    Tulsa, OK 74121
Jun 29, 2006 Suited for cutting applications in reinforced concrete, concrete block, clay brick, and other masonry materials, Contractor Pro High Speed Diamond Blades are available in General Purpose Segmented, General Purpose Turbo, and Asphalt Segmented versions. Segmented blades are .125 in. thick and laser-welded for optimal bond strength. For clean cuts, turbo version helps prevent chipping when cutting stone, marble, or clay brick. Blades come with 20 mm arbor and 1 in. knockout.

Micropump, Inc., A Unit Of IDEX Corp.    Vancouver, WA 98684
Jun 29, 2006 Offered in Low Pressure (Series ML) and High Performance (Series MH) configurations, micro annular gear pumps offer precise flow rate control to help conserve liquids and increase system efficiency. Gear tooth forming technology minimizes pulsations, and rotors provide tight flow rate control at differential pressures up to 1,160 psi. This allows pumps to dispense volumes as small as 0.25 µL and handle flow rates from 0.15-300 ml/min with accuracies within ±1%.

SciLabware (formerly Barloworld Scientific)    Staffordshire ST15 0SA  United Kingdom
Jun 29, 2006 Suited for use on bench or in incubators, SSM3 produces gentle 3D gyratory rocking action for low foaming agitation, DNA extractions, staining, and de-staining procedures. Its 3° to 12° angle of tilt can be moved to any position by hand to optimize mixing of vessels. Along with digital speed control, unit features built-in timer, 9.25 in.² platform, and 5-70 rpm speed range. Optional SM3/1 tier system is available; each tier is held in place by magnets.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Jun 29, 2006 Designed for Citizen machines, QS toolholding system helps reduce insert indexing times and enables diameters to be machined multiple times without changing machine settings. Each system kit includes stop, 2 spring-loaded wedges, and one short toolholder with shank diameters from 0808-1616 mm. While single screw controls clamping and unclamping capabilities, insert edge position is automatically set up by contact between short holder and stop and does not require adjustments.

Labconco Corp.    Kansas City, MO 64132 2696
Jun 29, 2006 Refrigerated Benchtop CentriVap® processes heat-sensitive samples such as RNA and other proteins that are subject to degradation by heat supplied by friction. If desired, microprocessor-controlled 300 W heater speeds evaporation with constant heat up to 100°C in 1° increments. Quick-Start(TM) One Button Start up activates rotor, heater, timer, and vacuum pump, while Quick-Stop(TM) system stops rotor and vacuum pump and bleeds air into chamber. Memory stores up to 9 user-set programs.

Elma Electronic Inc.    Fremont, CA 94538
Jun 29, 2006 Featuring steel construction, 19 in. rackmount 5U AdvancedTCA Chassis utilizes 48 Vdc input and offers dual redundant fan trays, shelf managers, and A/C power supplies. Side-to-side cooling is achieved via plug-in fan tray with dual 170 cfm fans and PWM control on each side of card cage. N+1 version offers two 700 W or 1,200 W power supplies as well as optional dual shelf management integration. Full mesh, replicated mesh, and dual star topologies can be implemented on same backplane.

Metabo Corp.    West Chester, PA 19380 4243
Jun 29, 2006 Suited for concrete, masonry, or natural stone, Rotary Hammers are available with round shank, SDS-plus, SDS-max, and spline masonry carbide bits in 4-cutter and 2-cutter designs. Four-cutter unit features self-centering tip to optimize penetration and make clean holes. Dust extraction accessories allow tools to be hooked to vacuum that collects dust at point of origin, minimizing user's exposure to free silica. CODE! anti-theft system protects tools from unauthorized use.

Elma Electronic Inc.    Fremont, CA 94538
Jun 29, 2006 Targeted for storage arrays, firewalls, blade servers, and home entertainment centers, MicroTCA systems support up to 48 single width, half height AdvancedMC modules. MicroTCA chassis 4U subrack features front-to-rear cooling and 14-slot Single Star backplane. Compliant to MicroTCA.0 v1.0 specification, subrack contains 1 MicroTCA Carrier Hub and 1 power module. EMC shielding and airflow are controlled by honeycomb filter structures.