ASM Sensors, Inc.    Elmhurst, IL 60126
Mar 20, 2007 Measuring ½ in. dia with overall length of less than 2 in., Model PRAS1 uses position magnet to provide contact-free and wear-free angular measurements. Unit has typical resolution of 0.1° and yields analog signal through use of D/A converter. Featuring M12 industrial housing rated up to IP68, sensor produces 4-20 mA, 0.5-4.5 V, and 0.5-10 V analog outputs. It is suited for use in factory automation equipment, variable valve controls, and mobile working machines.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Mar 20, 2007 Sigma Frequency Control compressor model SFC 18S combines proprietary Sigma Profile airend, Sigma Control Basic system, and variable speed drive technology to offer 21-114 scfm in pressures to 217 psig. Drive technology offers precise pressure control to ±2 psig and operates from 100% down to ~28% load. While wide-opening access doors permit frontal access to all major components, overall size and use of split-cooling air flow design facilitate ducting.

NOTIFIER Fire Systems    Northford, CT 06472
Mar 20, 2007 Suited for large-scale applications, NFS2-3030 supports up to 10 signaling line circuits for max capacity of 3,180 intelligent devices. Modular system offers built-in notification appliance circuits synchronization protocol for System Sensor, Wheelock, and Gentex horns, strobes, and horn/strobes. Expandable via NOTIoFIREoNET(TM) intelligent fire alarm network, system features FlashScan® intelligent device polling protocol and offers optional digital voice evacuation system.

Ideal Industries, Inc.    Sycamore, IL 60178
Mar 20, 2007 Able to strip RG-59, RG-6, and RG-6Q coaxial cable without nicks, Coax/UTP Combo Stripper is equally effective on unshielded twisted pair cable, including CAT 3, CAT 5e, and CAT 6. Users do not have to remove and replace stripping cartridges when moving from one cable type to another. Pre-measured stop eliminates measuring and trimming, while Push-in Ring prevents sharp coax conductor from injuring user's hand while terminating cable with push-on style connector.

EGS ELECTRICAL GROUP ? APPLETON    Rosemont, IL 60018
Mar 20, 2007 Ready for out-of-the-box installation, ALL-IN-ONE(TM) conduit bodies meet needs of electricians in industrial and commercial construction. Threaded hub model works with rigid conduit and IMC, while Multi-Hub(TM) threaded and set screw design works with rigid conduit, IMC, and EMT. Both versions, constructed of 100% copper-free aluminum, have neoprene gasket and stamped aluminum cover. Configurations are available for connecting straight conduit runs, branch conduit runs, and 90° bends.

Adept Technology, Inc.    Livermore, CA 94551
Mar 20, 2007 Running on SmartController(TM) CX controls and software platform, Adept Viper(TM) s650 and Adept Viper(TM) s850 bring precision motion and 6-axis dexterity to clean room assembly, handling, testing, and packaging applications. With integrated vision and embedded networking, robots target customers in solar, disk drive, LCD, semiconductor, and life sciences markets.

Spartan Scientific Inc.    Boardman, OH 44512
Mar 20, 2007 Model CRDV/S combines electronic sensor with solid-state integrated logic analysis circuit to determine exact amount of time necessary to empty condensate from pneumatic system. Unit allows only necessary amount of compressed air needed to purge excess fluid, minimizing compressor cycling and wear and tear on components. Housed in environment-resistant package, valve includes indicator lights for power and purge cycle.

Wera Tools Inc.    Stoney Creek, ON L8E-5S7  Canada
Mar 20, 2007 Designed to form to hand and allow efficient fastening with little effort, Kraftform® Comfort Screwdrivers feature markings on end of handle that indicate profile and size. Handle's soft black zone has varying roughness to help stop tool from slipping in hand. Blades are made from high-grade steel and go through hardening process, while black point tip snuggly fits into screw and prevents wear and damage caused by poor screwdriver tip fitting.

Bridgeport Fittings, Inc.    Stratford, CT 06497
Mar 20, 2007 Models BXE-100/200/300 feature continuous, smooth, nonmetallic side walls that completely enclose devices, creating insulating barrier between them and their respective metal boxes. Extender does not interfere with wiring, so no trimming is required. Mounted completely flush with wall, products fit most metallic or nonmetallic electrical boxes and accommodate GFCIs. While BXE-100 and BXE-200 correct up to 1 in. setbacks, BXE-300 corrects up to 5/8 in. setbacks.

Thermo Fisher Scientific    Waltham, MA 02454
Mar 20, 2007 Able to maintain temperatures from 5-40°C, ThermoFlex(TM) 900 and 1400 respectively deliver up to 900 and 1,400 W of continuous cooling capacity. Recirculation system features integrated funnel, full flow filtration, and visual fluid level indication. Air and fluid filters can be changed during operation, and integrated intelligence enables issues to be detected before impacting processes. Systems offer pumping capacities to 4.1 gpm and adjustable pressure to 100 psi.

Midwest Motion Products    Watertown, MN 55388
Mar 20, 2007 Able to accept any 12 Vdc source, Model MMP-TM55-90-12V GPk52-124 has 2.14 in. dia, measures 7.7 in. long, and has keyed output shaft of 12 mm dia x 25 mm long. Mounting is accomplished with 4 face-mount M5 threaded holes. Peak output of reversible gearmotor is 178 lb-in., and it only requires 1.0 A @ 12 Vdc to generate its full load torque. Motor windings for 24, 36, and 90 V are available, and design is rated IP54 for operation in harsh environments.

Proquis, Inc.    Des Plaines, IL 60018
Mar 20, 2007 Streamlining electronic document management, allCLEAR v7.10 can integrate complex files and translate them into diagrams that are suited for any type of presentation. It includes drag-and-drop option that lets users build multi-layer diagrams. With software, users can contact all members of organization by creating links to documents or website.

Hytrol Conveyor Co., Inc.    Jonesboro, AR 72401
Mar 20, 2007 ProSort SRT (Smart Roller Transfer) Conveyor is designed with multiple narrow belts to handle and transfer products as small as 4 x 4 in. or as large as 24 in. long and up to 20 lb. Equipped with right-angle pop-up rollers, unit is designed for 2-sided transfer of items to other right-angle conveyors, workstations, packing operations, ticketing stations, shipping departments, or similar operations. It handles up to 100 sorts/min, depending on product size.

VisiPak    Arnold, MO 63010
Mar 20, 2007 Available in PVC, PET, and PP, VisiPak Clamshell Packaging ranges in thickness from .007-.047 in. and is designed to protect product while displaying most precise details. Each thermoformed package nests to facilitate shipping and storage, and can be customized, offering design flexibility.

Van Putten Instruments BV      Netherlands
Mar 20, 2007 Utilizing 300, 400, or 600 mm long probe, VPFlowScope simultaneously measures mass flow from 80-150 mn/s, temperature up to 60°C, and pressure from 0-16 bar. Blue LCD display provides real-time information on all 3 parameters, while built-in datalogger enables user to store data. Mounted in pipe via 0.5 in. compression fitting, instrument provides 4-20 mA and RS485 outputs with accuracy of 2% of reading.

Adalet    Cleveland, OH 44135 3301
Mar 20, 2007 Suited for hazardous and industrial areas, MS2000 line includes Cutler Hammer A302 series starters and sizes rated up to 25 A. Each features pushbutton actuation with lock out provision to lock manual motor start in off position. Auxiliary contacts are available with one NO and one NC contact, and shunt release is available to electronically trip starter when voltage is applied. Under voltage release is another option to protect motor from low-voltage situation.

Royal Products, Div. Curran Mfg. Corp.    Hauppauge, NY 11788
Mar 20, 2007 Royal Roto-Shield(TM) Live Centers feature oversized steel coolant slinger machined into rotating point and spring-loaded neoprene seal that is resistant to abrasion and metalworking fluids. Construction promotes bearing life by deflecting coolant; protecting bearings against harmful chips, fines, and dust; minimizing seal wear; and maintaining grease consistency. Centers are rated for high-pressure coolant applications to 2,000 psi and have runout accuracy of ±0.000050 in. TIR.

Cognio    Germantown, MD 20876
Mar 20, 2007 Designed to address interfering devices on WiFi network, Spectrum Expert(TM) v3.1 provides profile on each device's spectrum characteristics, typical interference impacts, and signal strength. Tool then provides recommended course of action on how to eliminate or minimize impact to WiFi network. Instant Replay allows users to rewind live spectrum, while Real-time Snapshot lets users read spectrum plots in real-time by displaying interference or spectrum issues on chart.

Eastman Kodak Co. (Corporate Headquarters)    Rochester, NY 14650-0001
Mar 20, 2007 Designed for in vivo molecular imaging applications, X-SIGHT Imaging Agents help identify molecular abnormalities at very early stage, expediting development of treatment options that could help cure disease. Once attached to molecule and injected into organism, agents travel to target and highlight region of interest. X-Sight imaging agents are non-toxic, making them safe for research studies in oncology, cardiology, diabetes, and inflammation.

LBi Software Engineering    Woodbury, NY 11797
Mar 20, 2007 Intended for employee call centers, web-enabled CaseManager provides call tracking and help desk management. Case Distribution Algorithm ensures tough problems are forwarded to most qualified specialists, while Clipboard technology, employing search capabilities, allows CSRs to manage caseloads and quickly access important information they need. Trend analysis feature produces valuable metrics such as reasons for calls, resolution time, CSR effectiveness, and training issues.