Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Jun 22, 2007 Integrating 8 diodes in LLP1713 package with 0.55 mm profile, VESD05A8A-HNH provides ESD protection in portable electronics. It protects up to 8 signal or data lines in bidirectional asymmetrical mode and can also be used as 7-line protection device in bidirectional symmetrical mode. Max leakage current is less than 1 µA, and typ capacitance is 30 pF. Unit provides transient protection for one data line as per IEC6100042 (ESD) at 25 kV and IEC6100045 (lightning) from 4.5 A.

Intelligent Instrumentation    Tucson, AZ 85706
Jun 22, 2007 Powered by 400 MHz Intel® XScale(TM) RISC processor, LANpoint® 7 includes Windows CE operating system, non-volatile storage expandable to 500 MB, standard Ethernet 10/100BaseT, and optional IEEE802.11b/g wireless connectivity. Lock-down web browser can be used to limit web access to approved web-based application. With extended operating temperature of -20 to 55°C, waterproof, dustproof unit handles dirty or spray down environments and comes in touch and non-touch models.

Cooper Bussmann    Ellisville, MO 63021
Jun 22, 2007 InVision(TM) System uses Intelligent Fuse Monitors, Intelligent Circuit Monitors, wireless mesh router, and software to identify and relay open-circuit events caused by short circuits and overloads. When circuit opens, maintenance staff is notified by phone, e-mail, or fax detailing circuit location, correct replacement fuse to bring, and appropriate level of personal protective equipment. System offers 99.999% event transmission reliability.

Fluid Components Intl.    San Marcos, CA 92069 5115
Jun 22, 2007 Designed for CEMS pollution control applications, Model MT91 has chromium-carbide coating that protects it from dirty, abrasive, and hot particulates. Unit measures complex stack gas flows in accordance with clear air regulatory requirements and provides signal outputs of 4-20 mA, 0-5 Vdc, 1-5 Vdc, and 0-10 Vdc. Able to operate in environments up to 850°F and in line sizes greater than 24 in., meter features turndown range from 5:1-100:1 and flow sensitivity from 0.25-150 sfps.

Messer - MG Systems & Welding, Inc.    Menomonee Falls, WI 53051
Jun 22, 2007 Available as option for plasma and oxyfuel cutting machines, Ink Jet Marker provides alphanumeric labeling with printing in one direction of travel, in addition to line and contour marking for showing bend lines and feature locations. It uses 7 dot head to provide legible characters up to 1 in. tall at speeds up to 17 characters/sec. With operating range of -5 to +45°C and humidity range of 10-90% RH, marker is suited for fabricating environments.

Spectrex, Inc.    Cedar Grove, NJ 07009
Jun 22, 2007 SharpEye 20/20SI Triple IR Flame Detector has main section sealed to protect electronics and sensors from moisture during commissioning and maintenance. Modbus protocol is standard for RS-485 output, and microprocessor design allows for field programmability, minimizing false alarms. Factory settings can be updated before installation using PDA or laptop. Optical detector is available in FM and ATEX versions in aluminum or stainless steel housing.

Hendrickson International    Woodridge, IL 60517-4904
Jun 22, 2007 Designed for International 4000 and 8000 Series trucks, AERO CLAD(TM) Bumper Model AM7450SSC features lightweight design with mirrored finish that can be installed to factory mounting points. Stainless steel clad aluminum unit resists corrosion, cracking, pitting, peeling, and fading. Minor abrasions can be buffed out.

CleanAIR Systems, Inc.    Santa Fe, NM 87502
Jun 22, 2007 Incorporating CARB-verified PERMIT filter, PERMIT Filter/Silencer cuts exhaust emissions from prime power and emergency generators. Unit is installed on exhaust of generator, eliminating visible black smoke, diesel odor, and noise while engine is running. Manufactured using 304 stainless steel, filter/silencer is corrosion-resistant and fully insulated to minimize heat loss and provide sound attenuation.

Thermo Fisher Scientific    Newington, NH 03802
Jun 22, 2007 Transcend(TM) systems are available with silica-based TurboFlow® XL columns, which provide scientists in clinical research and pharmaceutical analysis capability to integrate online sample preparation with LC-MS analysis. Columns also help reduce sample preparation time and minimize ion suppression while accelerating analysis and inspiring data confidence. Available chemistries for 0.5 or 1.0 mm columns include C18, C8, Fluoro, Phenyl, and C2.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jun 22, 2007 Designed with fiber optic mirror technology, QuickSwitch® 6282 MEMS-based multimode mirror switch allows fiber optic device connected to unit's SC Duplex COMMON connector to access either of 2 fiber optic networks connected to A or B ports. Switch position can be changed via A/B front-panel pushbutton or serial RS-232 device connected to rear panel remote port. This 850 nm switch offers optical scalability as well as bit-rate and service/protocol transparency.

FrenchCreek Production, Inc.    Franklin, PA 16323
Jun 22, 2007 As available supplement to shock absorbing lanyards, U-RES-Q helps alleviate suspension trauma caused by fall and allows capable worker to climb back to anchor point. Latter is accomplished by automatically ejecting 16 ft synthetic rescue ladder if even slightest of falls should happen to occur. At this point, suspended worker can attempt to climb back to anchor point or stand on ladder to relieve pressure, increase blood flow, and ensure enough time for emergency response.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jun 22, 2007 QuickSwitch® 4192 allows fiber optic device connected to SC duplex COMMON connector of unit to access any of 4 fiber optic networks connected to A, B, C, or D ports or disconnect completely from all output ports. Switch position can be changed via depressing desired front panel pushbuttons or by device connected to remote port located on rear panel. MEMS-based multimode mirror switch has 850 nm wavelength and installs in 19 in. equipment rack.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jun 22, 2007 Providing Category 5 performance, QuickSwitch® Model 7343 features RJ45 connections on A, B, and COMMON ports, and internal circuitry that insures isolation between A and B devices/network. Switch position can be changed via front-panel pushbutton or remotely via DB9/female connector located on rear panel. Housed in aluminum case that provides EMI/RFI shielding, unit offers switch time of approximately 3.5 msec.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jun 22, 2007 Model 8408 PS/2 Keyboard, VGA Monitor, and PS/2 Mouse A/B Switch is designed to allow access from one PS/2 computer to 2 locations that each have keyboard, monitor, and mouse. Alternately, switch can be used where two PS/2 computers need to be shared among one keyboard, monitor, and mouse location. Actuated via rotary selector, switch features sealed construction with self-wiping contacts. Aluminum case provides shielding, and no external power is required.

Dwyer Instruments, Inc.    Michigan City, IN 46361 0373
Jun 22, 2007 Suited for pressure and vacuum applications, Series LPG4 gages come with 2.5 in. dial and offer ±1.5% FS accuracy. Units feature beryllium-copper diaphragm attached to brass plate and withstand ambient temperatures up to 140°F as well as process temperatures to 160°F. With dual English and metric scales in inches of water column and kilopascals, gages are available with ranges in vacuum, compound, and positive pressures to 160 in. wc.

Aalborg Instruments    Orangeburg, NY 10962
Jun 22, 2007 Flanged M Style Rotameter has seamless brushed SS body with 1 view opening, providing armored construction for operation in heavy-duty, harsh conditions. It handles industrial applications with flow rates up to 116 gpm and 250 scfm. Graduated for direct reading, device is equipped with flanged end fittings for in-line installation, and includes borosilicate glass flow tubes, Viton® O-rings, 316 SS fittings, guide rods, floats, and float stops.

Raymond Corporation, The    Greene, NY 13778 0130
Jun 22, 2007 Using ACR System(TM) for both drive and lift, 3-wheel, sit-down Model 4400 is suited for applications ranging from heavy-duty dock operations to higher-speed transport for supplying rack systems and moving picked orders. Attachment-ready AC truck can handle cartons, paper rolls, and slipsheets. It offers fingertip hydraulic controls, oil-cooled disc brakes, programmable travel speeds and acceleration, and bidirectional, floor-mounted pedals.

Linear Technology Corp.    Milpitas, CA 95035
Jun 22, 2007 Operating within VIN range of 3.6-34 V with transient protection to 36 V, Model LT3681 includes Burst Mode® operation to keep quiescent current under 50 µA, making unit suited for automotive applications. Internal switch, rated at 3.2 A, can deliver up to 2 A of continuous output current to voltages as low as 1.26 V. Housed in 3 x 4 mm DFN-10 package, step-down switching regulator includes power good flag, soft-start, and adjustable switching frequency from 300 kHz to 2.8 MHz.

OK International    Garden Grove, CA 92841
Jun 22, 2007 Featuring brushless motor technology that eliminates wearout of motor parts, Model BVX-200 Fume Extraction System delivers high torque and power for improved extraction performance and elimination of dust produced by brush friction. Features include low electrical noise and RF interference and elimination of sparking between brushes and commutator rings.

Advantech Automation Corp.    Cincinnati, OH 45240
Jun 22, 2007 Model PCI-1763UP delivers 8 optically-isolated digital inputs with isolation protection of 2,500 Vdc for collecting digital inputs in noisy environments and 8 relay actuators for serving as on/off control devices or small power switches. It features LED indicators to show active relays, 8 form C type relay output channels, output status read-back, retained relay output values for hot system reset, ESD protection of 2,000 Vdc, over-voltage protection of 70 Vdc, and 10-50 Vdc input range.