Warren Associates    Pittsburgh, PA 15212
Aug 15, 2007 Enabling non-destructive radiography testing, Hexalon Flex lead intensifying screens provide artifact-free x-rays of dimensional exterior/interior surfaces. Screens are designed with flexible backing and are able to reduce scatter and secondary radiation because of high absorption. They are available in Fiber 90 Bristol backing with Enviroseal© peel-off protective cover and in sheets or rolls from .005-.010 in. thick in variety of widths.

MAG Fadal    Chatsworth,, CA 91311
Aug 15, 2007 Designed for metal cutting needs of manufacturers, Models VMC 2216FX, 3016FX, and 4020FX machining centers can be equipped with Fadal MP CNC control or Fadal GE Fanuc 0i-MC digital control. Available for 3-, 4-, and 5-axis machining, Fadal MP features automatic routines for engraving, mill boring, drilling, tapping, and pocketing. Fadal GE offers integrated digital drives, 32-bit Pentium processor, tool life management, and extended part program editing.

Elma Electronic Inc.    Fremont, CA 94538
Aug 15, 2007 Suited for medical products, industrial enclosures, and various commercial applications, Type 35 Variety Case allows exact sizing of enclosure. Aluminum extrusions are cut to any specified length, and can accept tapped strips, sealing cords for EMC, optional direct mounting of panel or PCB, grounding terminals, or screws. Enclosures have conductive inner surface and sufficient contact points for EMC, and removable side panels that allow access to inside components.

Rex-Cut Products, Inc.    Fall River, MA 02720
Aug 14, 2007 Available in coarse, medium, fine, and very-fine grades, Sigma-Screen(TM) Multipurpose Discs are depressed center, Type 27 abrasive wheels that feature blend of zirconia-ceramic abrasive grains bonded to flexible mesh. Chatter-free discs will not clog and can be stacked on grinder for extended life. In addition to fiberglass, 4.5 in. diameter wheels are also effective on stainless steel, metals, aluminum, and wood.

Hobart Brothers Co.    Troy, OH 45373-2900
Aug 14, 2007 Offering creep resistance, TM-81B2 and TM-811B2 are designed for steels containing 1¼% Chrome and ½% Molybdenum, while TM-91B3 and TM-911B3 match chemistry of steels with 2¼% Chrome and 1% Molybdenum. Used only with 100% CO2 shielding gas, TM-81B2 and TM-91B3 come in 1/16 and 3/32 in. diameters, and are suited for flat and horizontal positions. Models TM-811B2 and TM-911B3, used with Argon/CO2 mixture, have all position capabilities and are available in .045, .052, and 1/16 in.

BS&B Safety Systems, Inc.    Tulsa, OK 74145
Aug 14, 2007 Suited for process plants requiring optimal operating pressure in gas or liquid service, SIGMA EXL(TM) and SIGMA(TM) Reverse Buckling Rupture Disks feature SAF(TM) Technology to accommodate range of burst pressures. Design minimizes fatigue on rupture disk, optimizing plant uptime. Pre-torqued SRB-7RS Safety Holder allows disk to be removed and inspected without having to re-torque, while circular score causes rupture disk to burst without fragmentation.

Rino Industries Ltd.    Chesterfield S41 9RN  United Kingdom
Aug 14, 2007 Designed to meet demands of dynamic drives on CNC machines that require high performance from their drive components, Series ADS and ASS couplings can be applied wherever 2 rotating opposite shafts must be coupled with locking force and without backlash. Able to be used at temperatures from -30 to +120ºC, these wear- and maintenance-free products are axially pluggable and torsionally stiff. Shock- and oscillation-damping design compensates for alignment errors.

Alliance Scale Inc.    Canton, MA 02021
Aug 14, 2007 Measuring 30 x 40 x 4.5 in. and weighing 105 lb, Alliance/Cardinal Portable Drum and Barrel Scale is designed for weighing up to 500 or 1,000 lb drums of scrap metal on-site. Included battery-powered digital weight indicator features keypad-selectable conversion units, RS-232 computer compatibility, and 5-digit, 1 in. high LCD that can be mounted anywhere. Live rails are provided for weighing skids, crates, and other types of containers.

Anver Corp. - Anver.Com    Hudson, MA 01749
Aug 14, 2007 Fully integrated, ergonomic Anver VB4 consists of electrically operated, variable-speed hoist and constant air flow vacuum pump that can be located up to 150 ft away and provides positive holding power without drift. With this system, one person can position porous loads on and off pallets, skids, and shelves. In addition to maneuverable knuckle handlebar with 2-hand safety release mechanism, system features vacuum gauge and quick-release capability.

Anver Corp. - Anver.Com    Hudson, MA 01749
Aug 14, 2007 Eliminating straps, slings, or hooks, which can slip off, scratch, or chip surfaces, Model VT140 is suited for picking up toilets and other odd-shaped or fragile products. It provides 100% duty cycle and can be equipped with custom end effectors that can accommodate loads weighing up to 150 lb. Permitting rapid attach and release without product damage, end effectors incorporate multiple vacuum suction cups for max holding power and stabilizer bars for extra support.

austriamicrosystems AG    Premstatten   Austria
Aug 14, 2007 Operating from single 2.7-5.5 V supply, Model AS1710 can swing to within 100 mV from rails while sinking or sourcing 50 mA of output current. Large short-time loads are covered with peak current of greater than 200 mA. Available in 6-pin SC70 package for -40 to +125°C operating environments, device features 10 MHz unity gain bandwidth and 10 V/µs slew rate. It is suited for headphone or speaker drivers, hands-free kits, TFT panels, sound ports, and DAC buffers.

Ceramic Coating, Inc.    Beverly, MA 01915
Aug 14, 2007 Available in 6 sizes with wire diameters from .020-.050 in., Alumina Coated Evaporation Baskets are internally heated crucibles that permit vacuum evaporation of several metals simultaneously, and maintain molten metals evaporants as induction propelled spinning ball within cavity. Units completely evaporate most materials such as gold, nickel, palladium, and silver without loss to chamber. Inside depths range from .225-.975 in. and top IDs range from .150-.900 in.

Diversified Technologies, Inc.    Bedford, MA 01730
Aug 14, 2007 Featuring single rack that provides 50 kW to 1 MW of output from 10-150 kV, Series HVPS replaces large 60 Hz transformer rectifiers, eliminates parallel connection of small power supplies, and can be located at point-of-load. Each solid-state unit has 30 in. sq footprint and uses tap water for cooling. Suited for large x-ray inspection systems, particle accelerators, and radar applications, units provide over-voltage and over-current protection up to +30% or preset to ±0.1% max ripple.

NKE AUSTRIA GmbH    Steyr A - 4407  Austria
Aug 14, 2007 Available in standard sizes with outer ring diameters from 80-400 mm, Electrically Insulated Rolling Bearings prevent passage of electric currents through bearings, protecting against electro corrosion. Units with oxide ceramic insulating layer have guaranteed minimum breakdown voltage of 1,000 Vac or Vdc. For smaller bearings, rolling elements made of oxide ceramic can be used. Load ratings, boundary dimensions, and tolerances are identical to standard bearings.

ETCO Incorporated    Warwick, RI 02888 1501
Aug 14, 2007 Designed to hold standard brass blades and ground pin within polypropylene housing, Male Bridge Power Cord Assembly features crimp ears that are uniformly positioned to accept 3-wires in one step. Wires can be attached manually or by automatic equipment. Creating rigid form factor, assembly is offered in 2 sizes for 10-12 and 18-14 gauge wires. Blades are UL 1659 certified.

ETCO Incorporated    Warwick, RI 02888 1501
Aug 14, 2007 Enabling OEMs to simplify designs by using single stamped piece, Overmolded Lead Frames can be made to customer specification using wide variety of stamped metals and plastics. Units are developed using rapid prototyping with 3D solid modeling analysis, and can be manufactured from virtually any alloy including medical grade, titanium, platinum, stainless, and copper alloys. Lead frames are supplied on reels for integration with molding processes.

Flexaust Co., Inc., The    Warsaw, IN 46581
Aug 14, 2007 Offered in ID sizes from 2-24 in. and 60-300 mm, Lawn and Leaf Collection Hoses combine smooth interior surface with flexibility and abrasion resistance. Available materials, such as Flx-Thane® MD medium-weight polyurethane as well as puncture- and UV-resistant Flx-Thane® HD heavy-wall polyurethane, are reinforced with coated spring steel wire helix. Also available, HT-W Santoprene® thermoplastic rubber features yellow external wearstrip.

Astrosyn International Technology Ltd    Kent   United Kingdom
Aug 14, 2007 Open PCB chargers, available in managed automatic and non-managed ranges, let manufacturers integrate charger for sealed lead acid batteries into OEM equipment. Managed range provides step charging and operates automatically on current-limited, constant-voltage charging cycle. Offered with 6/12/24/30 V outputs, mains fused units are short circuit- and reverse polarity-protected. Non-managed chargers can also be used as current-limited power supplies and offer 6/12/24 V outputs.

Laser Research, Inc.    Charlotte, NC 28217
Aug 14, 2007 LRO CO2 Laser Nozzles, compatible with mechanical or sensor heads, feature ±10 µm orifice size accuracy to optimize cutting performance. Suitable replacements for Prima®, Laserdyne®, and other CO2 lasers, they can be supplied in 1.2, 1.5, and 2.0 mm orifice sizes. Nozzles can be machined from brass, copper, aluminum, and ceramic with straight and tapered tips from 0.375-0.96 in. long and thread sizes from ¼-5/8 in. Brass nozzle lock rings are optional.

ON Semiconductor, LLC    Phoenix, AZ 85008
Aug 14, 2007 Available in Pb-free DFN-8 package that requires 9 mm² board space, NUS3116 combines main battery switch, wall charging switch, and USB charging switch elements. Integration of main power switch, -12 V, -6.2 A, µCool(TM) single P-channel MOSFET handles main battery switch function, while 2 internal low-saturation PNP transistors handle dual-channel charging elements. With 40 mW max RDS(ON), main switch MOSFET minimizes power loss during battery operation of portable electronics.