Cooper Power Tools    Lexington, SC 29071
Aug 29, 2007 Constructed with ergonomic weight and size considerations, Cleco® 18-48 series uses brushless motor with high-resolution resolver and mechanical reaction transducer technologies. Products are offered in angle, pistol, and in-line versions, delivering torque from 2-230 Nm to accommodate bolt sizes from M5-M16. Designed to promote speed, angle, and torque control during operation, series incorporates low-compression mechanical start switch and on-board memory chip.

Edmund Optics    Barrington, NJ 08007
Aug 29, 2007 Featuring multilayer anti-reflection coating to minimize back reflections, TECHSPEC(TM) Elliptical Plate Beamsplitters are available in 1.0 mm thick model for ultra-tight spaces or 3.0 mm thick version with surface accuracy of ¼ wave. When beamsplitters are oriented at 45° in optical path, they create circular aperture equal to diameter of minor axis.

Weed Instrument Co., Inc.    Round Rock, TX 78680
Aug 29, 2007 Designed and tested to be installed directly into bypass of primary coolant loop of pressurized water reactors, Model N9355 RTD is environmentally and seismically qualified to RCC-E K2 equipment qualification standard. Unit withstands severe vibration and shock, while providing time response of 1.5 sec or less. Material selection and external wire wound element design ensure low drift at elevated temperatures and high vibration.

OSG Power Tools    Bensenville, IL 60106
Aug 29, 2007 Capable of cutting variety of materials such as copper, stainless steel, PVC, and electrical conduit, Model TC-1 features self-centering drive mechanism for vibration-free operation. It includes see-through window for on-mark cutting alignment, clear safety guard for user's protection, replaceable chip-less cutting blade, and horseshoe-shaped cutting head for placement on stationary tube.

Epoxies Etc.    Cranston, RI 02921-3407
Aug 29, 2007 Filled with pure silver, electrically conductive 40-3900 features electrical resistivity value of less than 1 x 10^-4 W-cm and operating temperature range of -50 to +170°C. Product cures in 24 hr at 25°C, 1 hr at 65°C or 15 min at 90°C. In addition to chip bonding in microelectronic and optoelectronic applications, 2-component resin is suited for microwave EMI and RFI shielding, assembly and repair of PCBs, and as cold solder.

Spantech, LLC    Glasgow, KY 42141
Aug 29, 2007 Available on Designer System® conveyors, Low Profile Idler Assembly features nose diameter of 3½ in., eliminating need for transfer devices at conveyor infeed/discharge interfaces in many cases. Product as small as 4 in. can be transferred without stalling and without use of transfer bridge. Single-bolt removal capability of Idler Wearstrip facilitates maintenance. In conjunction with Intermediate Drive Unit, idler may be used at both ends of conveyor.

Envirosight LLC, Video Pipeline Inspection    Randolph, NJ 07869
Aug 29, 2007 Designed to measure pipe diameter and manhole depth with push of button, QuickView enables users to instantly know size of line they are inspecting as well as its distance below grade. In Pipe Measurement Mode, QuickView measures diameter of any pipe whose end can be viewed within camera's field of view from 4-12 in. in 2 in. increments. QuickView measures manhole diameters from 12-36 in. with ±5% accuracy, and manhole depth from 5-40 ft with ±5% accuracy.

Linear Technology Corp.    Milpitas, CA 95035
Aug 29, 2007 Featuring synchronous, current mode, switching regulator, Model LTC4268-1 delivers precise regulation to powered devices. It provides up to 35 W for 2-pair systems and as much as 80 W for 4-pair systems. Controller incorporates NoOpto feedback topology to provide full IEEE 802.3 isolation without need for optoisolator circuitry. Feedback amplifier senses output voltage through transformer winding during flyback period and uses voltage to tightly regulate output.

Thermadyne Industries, Inc.    St. Louis, MO 63017
Aug 29, 2007 Autocraft(TM) 70S-6 solid MIG wires are AWS ER70S-6 wires available in 2, 11, 33, and 44 lb spools as well as 550 and 830 lb drums. Packaged in heavy-grade colored corrugated cardboard, 2 and 11 lb spools are designed for point of purchase sale and display. Spools, which are layer level wound and constructed of ABS plastic, are distinctly marked with clearly labeled specifications and safety information.

Trico Mfg. Corp.    Pewaukee, WI 53072 3954
Aug 29, 2007 Suited for applications where it is essential to have precise amount of grease delivered to critical machine parts, Streamliner Dispensers provide variable feed rates lasting from half to 24 months. Units deliver precise metering of lubricant in remote areas up to 30 ft away. Offering capacities up to 500 cc, reservoir minimizes replacement and disposal. High operating pressures flush contaminants out and facilitate multi-point lubrication.

Material Transfer & Storage, Inc.    Allegan, MI 49010 0218
Aug 29, 2007 Designed to optimize production efficiency, Material Master(TM) systems feature Sure-Seal(TM) pneumatic spout clamp system for dust-tight operation and Flo-Master(TM) massaging system to ensure positive material flow. Volumetric feeder meters product into existing screener, while Flo-Lock(TM) discharge gate halts product flow for partial bag discharging. Offered as custom-designed system, unit has Type 304 stainless steel on all product contact surfaces to facilitate cleaning.

Highland Technology, Inc.    San Francisco, CA 94103
Aug 29, 2007 Consisting of 6U, single-width VME module, Model V340 produces sine, sawtooth, triangle, and pulse/PWM waveforms. Eight channels are each capable of generating waveforms from DC to 2 MHz with resolution of 0.004 Hz. Optional software-enabled 1:1 or 5:1 transformers allow isolated outputs of up to 100 V peak-to-peak. One female D25 furnishes waveform outputs, while 50-pin female SCSI connector provides sync output.

Liftomatic Material Handling, Inc.    Buffalo Grove, IL 60089
Aug 29, 2007 Model 10HT-4W is 4-wheel hand truck with dual 10 in. main wheels that have full roller bearings and dual 3 in. swivel casters that support drum while moving through plants and warehouses. Designed with concern for ergonomic safety, hand truck eliminates need for operator to bear weight of load during transport of rimmed steel, fiber, or plastic drums weighing up to 1,000 lb. Parrot-Beak® clamping mechanism adjusts to handle 10-85 gal drum sizes.

Dow Corning Corp.    Midland, MI 48686 0994
Aug 29, 2007 Dow Corning® S Series liquid silicone rubbers are also appropriate for disposable applications in IV sets and catheters as well as for components such as valves and O-rings. Similar to existing LSRs and consistent across Dow Corning® S40, S50, and S70 Liquid Silicone Rubber, chemistry features framework that optimizes it from molecular level. Products reach ultimate physical properties upon initial cure with no drift.

Jesterware    York YO1  United Kingdom
Aug 29, 2007 Jesterware DVD Ripper Professional v1.94 copies DVD and converts it to video formats such as DivX, XviD, H264, MPEG1, MPEG2, AVI, and Windows Media Video. User can convert chosen chapters or entire title and software allows control over encoding parameters or use of built-in parameters. It supports all DVD regions and PAL or NTSC encoded discs at 23.976, 24, 25, 29.97, or 30 fps. Additional software or video codecs are not required.

Supermicro Computer, Inc.    San Jose, CA 95131
Aug 29, 2007 Designed for 12 x 13 in. serverboards, SC825MTQ series chassis supports 7 expansion cards, 3 x 3.5 in. hot-swap drive bays for RAID configuration, and 2 high-efficiency 700 W redundant power supplies. With depth of 17.7 in., unit features advanced thermal design. At 14.5 in. deep, model SC523L provides front-side I/O access, is optimized for 12 x 10 in. boards, and supports 7 low-profile add-on cards and 2 fixed internal 3.5 in. hard drives.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Aug 29, 2007 DS38EP100 equalizes 40 in. of FR-4 pcb at data transmission rate of 3.125 Gbps and up to 5 m of 28 AWG HDMI cable at data rate of 3.4 Gbps. It features 7 dB maximum boost and its input and output impedance is 100 W. At 10 Gbps, DS80EP100 equalizes 20 in. of FR-4 and 5 m of 26 AWG cable. Bidirectional equalizers are supplied in 6-pin LLP® package, require no power or ground routing, and operate over -40 to +85°C temperature range.

TE Connectivity Ltd.    Berwyn, PA 19312
Aug 29, 2007 Providing grounding for solar panels and related products, SolKlip Connectors have 4 points of electrical contact and are suited for use with 12-10 AWG uninsulated copper wire. They can be installed with pliers and Phillips screwdriver and can be reused several times. Made from high conductivity copper alloy, Solar AWG Cable provides UV resistance in outdoor PV and solar panel installations. It is available in 500 or 1,000 ft reels in 10, 12, or 14 AWG wire size.

Vectron International    Hudson, NH 03051
Aug 29, 2007 Leveraging integrated crystal-based phase locked loop circuit, C3430 FCXO enables users to convert one input frequency into up to 4 independent output frequencies to facilitate clock distribution. Unit offers output frequencies up to 700 MHz, with jitter of less than 0.20 ps rms across 12 kHz to 20 MHz and less than 0.70 ps rms across 10 Hz to 100 kHz. Featuring surface mount design, RoHS-compliant device is housed in 13 x 20 mm package with 3.3 and 5 V supply voltage.

InterWoven Inc.    Sunnyvale, CA 94089
Aug 29, 2007 Accessed through Web interface, Interwoven Universal Search - Professional Services Edition enables professionals to securely search, access, extract, and manipulate all available content within their organization. Dynamic classification technology facilitates results navigation by presenting them in logical taxonomy. Solution also provides ability to map search solution to security model for each system of record used by firm.